GB 12264-1990
Replaced
YY/T 0809.13-2020
Active
Industry standards-Medicine
YY/T 0809.13-2020 Implants for surgery—Partial and total hip joint prostheses—Part 13:Determination of resistance to torque of head fixation of stemmed femoral components
YY/T 0809.13-2020 Implants for surgery—Partial and total hip joint prostheses—Part 13:Determination of resistance to torque of head fixation of stemmed femoral components
Price:
$ 36
Basic Information
Standard Code:
YY/T 0809.13-2020
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Orthopaedic surgery, orthopaedic instruments
ICS Name:
Surgical implants, prostheses, and orthoses
Publish Date:
2020-02-21
Implement Date:
2021-01-01
Pages:
8 pages
Scope
This part of YY/T 0809 specifies the method of measuring the torque required to cause the loosening of the femoral head of a hip joint prosthesis (where the head of the hip joint prosthesis is not expected to rotate relative to the neck) under specific laboratory conditions.
This part applies to the femoral components of partial or total hip joint prostheses, where the femoral head and femoral neck/shaft (hereinafter referred to as the cone) are fixed together by conical locking or other means, and where the femoral head and cone are separate components, made of metal or non-metallic materials.
This part does not include methods for inspecting samples; sample inspection should be conducted through consultation between the testing laboratory and the sample provider.
Development Information
Same series standard
Referenced Standards
GB/T 16825.1-2002 Verification of static uniaxial testing machines—Part 1:Tension/compression testing machines—Verification and calibration of the force-measuring system
GB/T 16825.1-2008 Verification of static uniaxial testing machines—Part 1:Tension/compression testing machines—Verification and calibration of the force-measuring system
GB/T 16825.1-2022 Metallic materials—Calibration and verification of static uniaxial testing machines—Part 1:Tension/compression testing machines—Calibration and verification of the force-measuring system
YY/T 0809.1-2010 Implants for surgery—Partial and total hip joint prostheses—Part 1:Classification and designation of dimensions
YY/T 0809.10-2014 Implants for surgery—Partial and total hip joint prostheses—Part 10:Determination of resistance to static load of modular femoral heads
YY/T 0809.10-2022 Implants for surgery—Partial and total hip-joint prostheses—Part 10:Determination of resistance to static load of modular femoral heads
Adopt standards
ISO 7206-13:2016
Related Standards
GB 12279-1990
Replaced
GB 12279-1990 Cardiac valve prostheses general technical specification
GB 12417-1990
Replaced
GB 12417-1990 The general technological conditions of surgical metal implant
GB/T 13461-1992
Replaced
GB/T 13461-1992 Synthetic resin blow knee prostheses
GB/T 14191-1993
Replaced
GB/T 14191-1993 Terminology for prosthetics and orthotics
GB 14722-1993
Replaced