Standards

CJ/T 110-2018 Active

CJ/T 110-2018 Socket type pipe union

This standard specifies the product classification, structure, marking, materials, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of socket-and-spigot pipe joints (hereinafter referred to as "pipe joints") used in building piping projects.
This standard applies to pipe joints for aluminum-plastic composite pipes and plastic piping systems with a nominal size of 40 mm to 75 mm.

Publish Date: 2018-11-16

CJ/T 111-2018 Active

CJ/T 111-2018 Sleeve-clipping type brass pipe fitting

This standard specifies the product classification, structure, and marking, materials, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of copper pipe fittings used in building piping projects (hereinafter referred to as pipe fittings).
This standard applies to copper pipe fittings for aluminum-plastic composite pipes and plastic piping systems with a nominal size of 12 mm to 32 mm.

Publish Date: 2018-11-16

CJ/T 179-2018 Active

CJ/T 179-2018 Self-operated flow control valve

This standard specifies the classification and marking of self-acting flow control valves (hereinafter referred to as control valves), general provisions, requirements, test methods, inspection rules, marking, packaging, transportation, and storage.
This standard applies to self-acting flow control valves used in heating (cooling) systems with water as the medium, where the inlet pressure of the medium is less than 2.5 MPa and the temperature ranges from 4 ℃ to 150 ℃.

Publish Date: 2018-11-16

CJ/T 24-2018 Active

CJ/T 24-2018 Woody seedling for green space and landscape

This standard specifies the requirements, testing methods, inspection rules, marking, packaging, and transportation for woody nursery seedlings used in landscape gardening. This standard is applicable to woody nursery seedlings used in landscape gardening.

Publish Date: 2018-11-16

CJ/T 25-2018 Active

CJ/T 25-2018 Hand flow adjusting valves for heating

This standard specifies the classification and marking, operating conditions and working pressure difference, valve body structure and dimensions, materials, requirements, test methods, inspection rules, cleaning and handling, marking, packaging, transportation, and storage of manual flow adjustment valves for heating water systems and air conditioning water systems.
This standard applies to manual flow adjustment valves for heating (hereinafter referred to as "adjustment valves") with a design pressure of less than or equal to 2.5 MPa and a design temperature of the hot water medium of less than or equal to 200 ℃, and a nominal diameter of 15 mm to 600 mm.

Publish Date: 2018-11-16

CJ/T 533-2018 Active

CJ/T 533-2018 Technical specification for urban rail transit vehicle carbodies

This standard specifies the symbols and codes of the car bodies of urban rail transit vehicles, general requirements, technical requirements for various components and assembly of car bodies, car body materials and allowable stress, evaluation of car body structure functions, car body loads, car body inspection rules, quality assurance, marking, packaging, transportation, and storage, etc.
This standard applies to metro vehicles, linear motor vehicles, straddle-type monorail transit vehicles, low-floor trams, and medium- and low-speed maglev transit vehicles with a maximum operating speed of no more than 120 km/h as specified in CJJ/T 114. Other types of urban rail transit vehicles may refer to this standard for implementation.

Publish Date: 2018-11-16

CJJ/T 283-2018 Active

CJJ/T 283-2018 Technical standard for saline-alkaline land amelioration in landscape project

本标准适用于我国盐碱土主要分布区盐碱地的新建、扩建和改建各类园林绿化工程的土壤改良

Publish Date: 2018-11-08

CJJ/T 96-2018 Active

CJJ/T 96-2018 Standard for metro gauges

本标准适用于运行在隧道内外，不超过120km/h速度等级的城市钢轮钢轨系统标准轨距系列地铁A1、A2型及B1、B2型车辆轨道交通系统的限界设计、施工

Publish Date: 2018-11-07

CJ/T 519-2018 Active

CJ/T 519-2018 Equipment for municipal pipeline closed circuit television inspection

This standard specifies the terms and definitions, components, and basic functions, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of municipal pipeline television detectors.
This standard applies to the manufacture and inspection of municipal pipeline television detectors.

Publish Date: 2018-11-07

CJ/T 531-2018 Active

CJ/T 531-2018 Testing,sampling and sample preparation of slag and ash from waste incinerator

This standard specifies the general requirements for sampling and testing of incineration ash from municipal solid waste, including sampling and sample preparation, as well as testing.
This standard applies to the sampling, sample preparation, and heat loss rate testing of ash from municipal solid waste incineration plants during their operation.

Publish Date: 2018-11-07

CJJ/T 287-2018 Active

CJJ/T 287-2018 Standard for landscape ma ntenance and management

本标准适用于城镇规划区内绿地养护及管理

Publish Date: 2018-11-07

CJJ/T 292-2018 Active

CJJ/T 292-2018 Technical standard for spraying-seeding revegetation engineering of slopes

本标准适用于坡率小于1:0.5的岩土边坡的喷播绿化工程的设计、施工及验收

Publish Date: 2018-11-07