Standards

JG/T 367-2012 Replaced

JG/T 367-2012 Self-undercut & post-undercut mechanical anchors and undercut drill bit for use in concrete

This standard specifies the terms and definitions, classification and marking, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of mechanical anchors and reaming drills used in construction projects.
This standard applies to mechanical anchors used for post-anchoring connections in construction projects with concrete as the base material, and the dedicated reaming drills made of alloy steel that are compatible with them; those used with other materials as the base material can be used as a reference.

Publish Date: 2012-02-09

JG/T 352-2012 Replaced

JG/T 352-2012 Pore-forming mould for cast-in-situ concrete hollow structure

This standard specifies the terms and definitions, classification and marking, general requirements, technical requirements, test methods, inspection rules, marking, transportation, and storage of perforated core molds (hereinafter referred to as perforated core molds) for cast-in-place concrete hollow structures.
This standard applies to perforated core molds used in cast-in-place concrete hollow structures, such as hollow floors, hollow walls, civil air defense projects, structures, and bridge projects in industrial and civil buildings.

Publish Date: 2012-02-06

JG/T 313-2011 Replaced

JG/T 313-2011 Metal sheath inorganic mineral insulated cables and their terminations with a rated voltage not exceeding 750 V

This standard specifies the terms and definitions, classification, designation, specifications and markings, technical requirements, test methods, inspection rules, marking and labeling, packaging, transportation, and storage of inorganic mineral insulated cables with metal sheaths rated at 750 V or less and their terminals.
This standard applies to inorganic mineral insulated cables with metal sheaths, terminals, and outer sheaths used for power wiring.

Publish Date: 2011-02-17

JG/T 284-2010 Replaced

JG/T 284-2010 Glass fiber sheet for strengthening and restoring structures

This standard specifies the terms and definitions, specifications and markings, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of fiberglass cloth used for structural reinforcement.
This standard applies to fiberglass cloth used for the reinforcement and repair of concrete structures, wooden structures, masonry structures, and bridge structures, etc.

Publish Date: 2010-07-29

JG/T 274-2010 Replaced

JG/T 274-2010 General requirements for building shading product

This standard specifies the terms and definitions, classification and marking, materials, requirements, and test methods for building shading systems.
This standard applies to building shading systems, excluding those integrated into insulated glass units.

Publish Date: 2010-07-20

JG/T 268-2010 Replaced

JG/T 268-2010 Door closer for building

This standard specifies the terms and definitions, classification and marking, materials, requirements, test methods, inspection rules, as well as marking, packaging, transportation, and storage of door closers used in buildings.
This standard applies to door closers used in general industrial and civil buildings.

Publish Date: 2010-03-23

JG/T 271-2010 Replaced

JG/T 271-2010 Structural adhesives for strengthening structures with steel plate

This standard specifies the terms and definitions, classification and marking, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of building structural adhesives used for steel-bonded reinforcement (referred to as steel-bonded adhesives).
This standard applies to building structural adhesives used for steel-bonded reinforcement of concrete structures.

Publish Date: 2010-03-23

JG/T 258-2009 Replaced

JG/T 258-2009 Nonmetallic and foil-insulant composite duct

This standard specifies the terms and definitions, classification and marking, basic requirements, testing methods, inspection rules, marking, transportation, storage, etc. of non-metallic and composite air ducts.
This standard applies to non-metallic and composite air ducts used in ventilation and air conditioning, as well as smoke control and exhaust systems of newly built, expanded, and renovated industrial and civil buildings.
The non-metallic and composite air ducts referred to in this standard include non-metallic air ducts and composite air ducts, hereinafter referred to as air ducts.

Publish Date: 2009-10-26

JG/T 162-2009 Replaced

JG/T 162-2009 Remote transmission meter reading system for residence

This standard specifies the terms and definitions, system structure, requirements, test methods, inspection rules, marking and user manuals, packaging, transportation, and storage of the residential remote meter reading system (referred to as the meter reading system).
This standard is applicable to residential buildings.

Publish Date: 2009-10-19

JG/T 251-2009 Replaced

JG/T 251-2009 Metal venetian blinds for shading of building

This standard specifies the terms and definitions, classification, code and marking, materials and accessories, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of shading metal blinds.
This standard applies to shading metal blinds used indoors and outdoors in buildings, double-layered curtain walls, and double-layered windows with shading metal blinds. Products for other related uses can be used as a reference.

Publish Date: 2009-06-18

JG/T 252-2009 Replaced

JG/T 252-2009 Sky-light blind for building

This standard specifies the terms and definitions, classification and marking, materials, requirements, test methods, inspection rules, labels, packaging, transportation, and storage of awning curtains fixed to buildings.
This standard applies to shading awning curtains used indoors and outdoors in buildings.

Publish Date: 2009-06-18

JG/T 253-2009 Replaced

JG/T 253-2009 Arm-awning for building

This standard specifies the terms and definitions, classification and marking, materials, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of curved-arm awning products for building applications.
This standard applies to curved-arm awnings used outdoors in buildings.

Publish Date: 2009-06-18