GB/T 3691-1983
Replaced
JG/T 352-2012
Replaced
Industry standards-The construction industry
JG/T 352-2012 Pore-forming mould for cast-in-situ concrete hollow structure
JG/T 352-2012 Pore-forming mould for cast-in-situ concrete hollow structure
Basic Information
Standard Code:
JG/T 352-2012
Standard Type:
Industry standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Concrete products
ICS Name:
Concrete and concrete products
Publish Date:
2012-02-06
Implement Date:
2012-05-01
Pages:
21 pages
Scope
This standard specifies the terms and definitions, classification and marking, general requirements, technical requirements, test methods, inspection rules, marking, transportation, and storage of perforated core molds (hereinafter referred to as perforated core molds) for cast-in-place concrete hollow structures.
This standard applies to perforated core molds used in cast-in-place concrete hollow structures, such as hollow floors, hollow walls, civil air defense projects, structures, and bridge projects in industrial and civil buildings.
Development Information
Superseded by the following standards
Referenced Standards
GB/T 1596-2005 Fly ash used for cement and concrete
GB 8624-2006 Classification for burning behavior of building materials and products
JC/T 435
GB 175-1999 Portland cement and ordinary Portland cement
GB 175-2007 Common portland cement
GB 175-2023 Common portland cement
GB 1499-1998 Hot rolled ribbed steel bars for the reinforcement of concrete
GB/T 1499.1-2008 Steel for the reinforcement of concrete—Part 1:Hot rolled plain bars
GB/T 1499.1-2017 Steel for the reinforcement of concrete—Part 1:Hot rolled plain bars
GB 1499.1-2024 Steel for the reinforcement of concrete—Part 1:Hot rolled plain bars
GB/T 1499.2-2007 Steel for the reinforcement of concrete—Part 2:Hot rolled ribbed bars
GB/T 1499.2-2018 Steel for the reinforcement of concrete—Part 2:Hot rolled ribbed bars
GB 1499.2-2024 Steel for the reinforcement of concrete—Part 2:Hot rolled ribbed bars
GB/T 1499.3-2002 Welded steel fabric for the reinforcement of concrete
GB/T 1499.3-2010 Steel for the reinforcement of concrete—Part 3:Welded fabric
GB/T 1499.3-2022 Steel for the reinforcement of concrete—Part 3:Welded fabric
GB 6566-2001 Limit of radionuclides in building materials
GB 6566-2010 Limits of radionuclides in building materials
GB 8076-1997 Concrete admixtures
GB 8076-2008 Concrete admixtures
GB 13013-1991 Hot rolled plain steel bars for the reinforcement of concrete
GB 13788-2000 Cold rolled ribbed steel wires and bars
GB/T 13788-2008 Cold rolled ribbed steel wires and bars
GB/T 13788-2017 Cold rolled ribbed steel bars
GB 13788-2024 Cold rolled ribbed steel bars
GB/T 14684-2001 Sand for building
GB/T 14684-2011 Sand for construction
GB/T 14684-2022 Sand for construction
GB/T 14685-2001 Pebble and crushed stone for building
GB/T 14685-2011 Pebble and crushed stone for construction
GB/T 14685-2022 Pebble and crushed stone for construction
JC/T 481-2013
JC/T 540-2006 Cold-drawn low carbon steel wire for concrete products
JC/T 659-2003 Low alkalinity of sulphoaluminate cement
HJ/T 231-2006 Environmental Label Product Technical Requirements: Recycled Plastic Products
JC/T 481-1992 JC/T 481-1992 Building Dustless Slaked lime powder
GB 50010-2010 Code for design of concrete structures
GB 50016-2014 Code for fire protection design of buildings
GB/T 8076-2025 Concrete admixtures
Related Standards
GB/T 3692-1983
Replaced
GB/T 3692-1983 Test method of ferrocement panels in axial tension
GB/T 4582-1984
Active
GB/T 4582-1984 Terms and their definition of ferrocement
GB/T 8075-1987
Replaced
GB/T 8075-1987 Classification, nomenclature and definition of concrete admixtures
GB/T 14908-1994
Abolished
GB/T 14908-1994 Internal and partition concrete panel in residence
GB 396-1994
Replaced