GB/T 11355-1989
Replaced
CJ/T 495-2016
Active
Industry standards-Urban construction
CJ/T 495-2016 Steel wire for construction cable
CJ/T 495-2016 Steel wire for construction cable
Basic Information
Standard Code:
CJ/T 495-2016
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Bridge and culvert engineering
ICS Name:
Cable or rope drive and its parts
Publish Date:
2016-08-08
Implement Date:
2017-02-01
Pages:
12 pages
Scope
This standard specifies the classification and marking of steel wires used in urban bridge cables, general requirements, testing methods, inspection rules, acceptance, marking, packaging, and quality certificates.
This standard applies to bright steel wires, galvanized steel wires, zinc-5% aluminum mixed rare earth alloy-coated steel wires, and epoxy-coated steel wires used in urban bridge projects. Other steel wires used in civil engineering projects may be implemented in accordance with this standard.
Development Information
Replace the following standards
Referenced Standards
GB/T 2103-2008 General requirements for acceptance,packing,marking and quality certification of steel wire
GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature
GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature
GB/T 238-2002 Metallic materials—Wire—Reverse bend test
GB/T 238-2013 Metallic materials—Wire—Reverse bend test
GB/T 239.1-2012 Metallic materials—Wire—Part 1:Simple torsion test
GB/T 239.1-2023 Metallic materials—Wire—Part 1:Simple torsion test
GB/T 470-1997 Zinc ingots
GB/T 470-2008 Zinc ingots
GB/T 1839-2003 Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products
GB/T 1839-2008 Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products
GB/T 2972-1991 Zinc-coated steel wire—Test method for uniformity of zinc coating on wire by the copper sulphate dip
GB/T 2972-2016 Test method for uniformity of zinc coating on zinc-coated steel wire by the copper sulphate dip
GB 2976-1988 Metallic materials—Wire—Wrapping test
GB/T 2976-2004 Metallic materials—Wire—Wrapping test
GB/T 2976-2020 Metallic materials—Wire—Wrapping test
GB/T 12689.1-2004 The methods for chemical analysis of zinc and zinc alloys—The determination of aluminum content—The chromazurol S-polyethylene glycol octyl phenylether-cetylpyridine bromine spectrophotometric method and the EDTA titrimetric method
GB/T 12689.1-2010 Methods for chemical analysis of zinc and zinc alloys—Part 1:Determination of aluminum content—Chromazurol S polyethylene glycol octyl phenylether-cetylpyridine bromine spectrophotometry,Chromeazurol S spectrophotometric method and EDTA titrimetry
GB/T 22315-2008 Metallic materials—Determination of modulus of elasticity and Poisson's ratio
GB/T 25835-2010 Epoxy-coated steel wires for cables
YS/T 310-1995 Zinc alloy for hot dip galvanizing
YS/T 310-2008 Zinc alloy ingot for hot dip galvanizing
YS/T 310-2021 Galvanized Zinc Alloy Ingots for Hot Dipping
GB/T 1839-2025 Test method for gravimetric determination of the mass per unit area of galvanized coatings on steel products
Related Standards
GB/T 11357-1989
Replaced
GB/T 11357-1989 Quality, Surface roughness and balance of transmission pulleys
GB/T 11361-1989
Replaced
GB/T 11361-1989 Synchronous belt drives—Pulleys
GB/T 11362-1989
Replaced
GB/T 11362-1989 Synchronous belt drives—Calculation of power rating and drive centre distance
CJ/T 504-2016
Active
CJ/T 504-2016 Cable with the sheath of high density polyethylene
T/CITS 0003-2024
Active