GB/T 3163-1993
Replaced
GB/T 22360-2008
Active
National standards
GB/T 22360-2008 Vacuum pumps—Safety requirements
GB/T 22360-2008 Vacuum pumps—Safety requirements
Basic Information
Standard Code:
GB/T 22360-2008
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Vacuum technology and equipment
ICS Name:
Vacuum technology
Publish Date:
2008-08-28
Implement Date:
2009-10-01
Pages:
22 pages
Scope
This standard applies to various vacuum pumps, vacuum units, and vacuum extraction systems. The standard lists the important hazards associated with vacuum pumps during their use and subsequent disposal, and specifies in detail the safety requirements applicable to the design, installation, operation, maintenance, and disassembly of vacuum pumps.
This standard does not apply to pumps that continuously extract gas under open systems and those with an inlet pressure higher than 75kPa (750mbar), such as vacuum cleaners and ventilation fans.
Some vacuum pumps used in special situations should comply with the special standards related to their applications.
Development Information
Referenced Standards
GB 4793.1-2007 Safety requirements for electrical equipment for measurement, control, and laboratory use—Part 1:General requirements
GB 5226.1-2002 Safety of machinery—Electrical equipment of machines—Part 1:General requirements
ISO/TR 11688-1
ENV 1070
EN 1127-1
EN 60079-0
EN 60529
EN 61000-6-2
EN 61000-6-4
GB 2894-1996 Safety signs
GB 2894-2008 Safety signs and guideline for the use
GB/T 3163-1993 Terminology for vacuum technology
GB/T 3163-2007 Vacuum technology—Terminology
GB/T 5465.2-1996 Graphical symbols for use on electrical equipment
GB/T 5465.2-2008 Graphical symbols for use on electrical equipment—Part 2:Graphical symbols
GB/T 5465.2-2023 Graphical symbols for use on electrical equipment—Part 2:Graphical symbols
GB/T 8196-2003 Safety of machinery—Guards—General requirements for the design and construction of fixed and movable guards
GB/T 8196-2018 Safety of machinery—Guards—General requirements for the design and construction of fixed and movable guards
GB/T 12241-2005 Safety valves—General requirements
GB/T 12241-2021 Safety valves—General requirements
GB 12265.1-1997 Safety of machinery—Safety distances to prevent danger zones being reached by the uppar limbs
GB/T 14574-2000 Acoustics—Declaration and verification of noise emission values of machinery and equipment
GB/T 16273.1-1996 Graphical symbols for use on equipment—Common symbols
GB/T 16273.1-2008 Graphical symbols for use on equipment—Part 1:Common symbols
GB 16754-1997 Safety of machinery—Emergency stop—Principles for design
GB/T 16754-2008 Safety of machinery—Emergency stop—Principles for design
GB/T 16754-2021 Safety of machinery—Emergency stop function—Principles for design
GB/T 18153-2000 Safety of machinery—Temperatures of touchable surfaces—Ergonomics data to establish temperature limit values for hot surfaces
GB/T 18153-2024 Safety of machinery—Safety data to establish temperature limit values for touchable hot surfaces
GB 18209.1-2000 Safety of machinery—Indication, marking and actuation—Part 1:Requirements for visual, auditory and tactile signals
GB/T 18209.1-2010 Electrical safety of machinery—Indication,marking and actuation—Part 1:Requirements for visual,acoustic and tactile signals
GB/T 21271-2007 Vacuum technology—Noise measurement for vacuum pumps
GB/T 3163-2024 Vacuum technology—Vocabulary
GB/T 825-1988 Eyebolts
GB 2894-2025 Safety colours and safety signs
GB/T 21271-2026 Vacuum technology—Noise measurement for vacuum pumps
Adopt standards
EN 1012-2:1996
Related Standards
GB/T 3164-1993
Replaced
GB/T 3164-1993 Vacuum technology—Graphical symbols
GB/T 6070-1995
Replaced
GB/T 6070-1995 Vacuum flanges
GB/T 11164-1999
Replaced
GB/T 11164-1999 Vacuum coating plant generic specification
GB/T 18193-2000
Active
GB/T 18193-2000 Vacuum technology—Mass-spectrometer-type leak-detector calibration
GB/T 4982-2003
Replaced