GB 4962-1985
Replaced
GB/T 16942-2009
Replaced
National standards
GB/T 16942-2009 Gas for electronic industry—Hydrogen
GB/T 16942-2009 Gas for electronic industry—Hydrogen
Basic Information
Standard Code:
GB/T 16942-2009
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Industrial gases and chemical gases
ICS Name:
Industrial gases
Publish Date:
2009-10-30
Implement Date:
2010-05-01
Pages:
12 pages
Scope
This standard specifies the technical requirements, test methods, and packaging, marking, storage, transportation, and safety for hydrogen used in the electronics industry. This standard applies to bottled, containerized, and piped hydrogen used in the electronics industry, which is produced by purifying hydrogen gas as a raw material. These hydrogen gases are mainly used to provide a reducing atmosphere, serve as a carrier gas for epitaxy processes, and be used as a gas supply material for plasma etching agents.
Development Information
Replace the following standards
Superseded by the following standards
Referenced Standards
GB 190-2009 Packing symbol of dangerous goods
气瓶安全监察规程
压力容器安全技术监察规程
压力管道安全管理与监察规定
GB/T 3634.1-2006 Hydrogen—Part 1:Industrial hydrogen
GB/T 3723-1999 Sampling of chemical products for industrial use—Safety in sampling
GB 4962-1985 Technical safety regulation for gaseous hydrogen use
GB 4962-2008 Technical safety regulation for gaseous hydrogen use
GB/T 5099-1994 Seamless steel gas cylinders
GB/T 5099.1-2017 Seamless steel gas cylinders—Part 1:Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa
GB/T 5099.3-2017 Seamless steel gas cylinders—Part 3:Normalized cylinders
GB/T 5099.4-2017 Seamless steel gas cylinders—Part 4:Seamless stainless steel gas cylinders
GB/T 6285-2003 Determination of trace oxygen in gases—Eletrochemical method
GB/T 6285-2016 Determination of trace oxygen in gases—Electrochemical method
GB 7144-1999 Colored cylinder mark for gases
GB/T 7144-2016 Coloured cylinder mark for gases
GB/T 8984-2008 Determination of carbon monoxide,carbon dioxide and hydrocarbon in gases—Gas chromatographic method
GB/T 8984.1-1997 Determination of carbon monoxide,carbon dioxide and hydrocarbon in the gases—Part 1:Determination of carbon monoxide,carbon dioxide and mathane in the gases—Gas chromatographic method
GB/T 8984.2-1997 Determination of carbon monoxide,carbon dioxide and hydrocarbon in the gases—Part 2:Determination of total content of carbon monoxide,carbon dioxide and hydrocarbon in gases—Gas chromatographic method
GB/T 8984.3-1997 Determination of carbon monoxide,carbon dioxide and hydrocarbon in the gases—Part 3:Determination of total hydrocarbon in gases—Flame ionization method
GB 14194-1993 Rules for filling of permanent gas cylinders
GB/T 14194-2006 Rules for filling of permanent gas cylinders
GB/T 14194-2017 Rules for filling of compressed gas cylinders
GB/T 8984-2025 Gas analysis—Determination of the contents of trace carbon monoxide, carbon dioxide and hydrocarbon in gases—Gas chromatography with flame ionization detector
GB/T 3634.1-2025 Hydrogen—Part 1:Industrial hydrogen
Related Standards
GB/T 8981-1988
Replaced
GB/T 8981-1988 Determination of trace hydrogen in gases—Gas chromatographic method
GB/T 10627-1989
Replaced
GB/T 10627-1989 Gas analysis—Preparation of calibration gas mixtures—Static volumetric methods
GB/T 10628-1989
Replaced
GB/T 10628-1989 Gas analysis—Determination of composition of calibration gas mixtures—Comparison methods
GB 13548-1992
Replaced
GB 13548-1992 General principle of safety assessment for phosgene and its products plant
GB 13591-1992
Replaced