GB/T 3317-1982
Replaced
GB/T 21413.1-2018
Active
National standards
GB/T 21413.1-2018 Railway applications—Electric equipment for rolling stock—Part 1:General service conditions and general rules
GB/T 21413.1-2018 Railway applications—Electric equipment for rolling stock—Part 1:General service conditions and general rules
Price:
$ 113
Basic Information
Standard Code:
GB/T 21413.1-2018
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Traction electrical equipment
ICS Name:
Electric traction equipment
Publish Date:
2018-12-28
Implement Date:
2019-07-01
Pages:
37 pages
Scope
This part of GB/T 21413 specifies the general conditions and requirements for the electrical equipment on the main circuits, auxiliary circuits, control circuits, and indication circuits of rail transit locomotives and rolling stock. Note: Some provisions in these rules may be applicable to equipment on other locomotives and rolling stock (such as mining locomotives, trolleybuses, etc.) after consultation between manufacturers and users. The purpose of this part is to standardize as much as possible the common rules and requirements for electrical equipment on locomotives and rolling stock, so as to achieve consistency in equipment requirements and testing, and thus avoid testing according to different standards. This part covers all requirements related to the expected environmental conditions, structure, performance, and corresponding general tests under normal operating conditions, as well as special fields that have received widespread attention and application, such as temperature rise and dielectric properties. When this part is inconsistent with certain requirements of relevant product standards, the requirements of the product standards shall take precedence.
Development Information
Replace the following standards
Referenced Standards
GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)
GB/T 4798.5-2007 Environmental conditions existing in the application of electric and electronic products—Section 5:Ground vehicle installations
GB/T 32347.1-2015 Railway applications—Environmental conditions for equipment—Part 1:Equipment on board rolling stock
IEC 61133:2016
GB 1402-1998 A.C.Voltage of electric traction for the railway main lines
GB/T 1402-2010 Railway applications—Supply voltages of traction systems
GB/T 2423.1-2001 Environmental testing for electric and electronic products—Part 2:—Test methods Tests A:Cold
GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold
GB/T 2423.2-2001 Environmental testing for electric and electronic products—Part 2:Test methods-Tests B:Dry heat
GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat
GB/T 2423.3-1993 Basic environmental testing procedures for electric and electronic products—Test Ca:Damp heat, steady state
GB/T 2423.3-2006 Environmental testing for electric and electronic products—Part 2:Testing method—Test Cab:Damp heat, steady state
GB/T 2423.3-2016 Environmental testing—Part 2:Testing method—Test Cab:Damp heat,steady state
GB/T 2423.4-1993 Basic environmental testing procedures for electric and electronic products—Test Db:Damp heat, cyclic
GB/T 2423.4-2008 Environmental testing for electric and electronic products—Part 2:Test method—Test Db:Damp heat,cyclic(12 h+12 h cycle)
GB/T 2423.18-2000 Environmental testing—Part 2:Tests—Test Kb:Salt mist, cyclic (sodium chloride solution)
GB/T 2423.18-2012 Environmental testing—Part 2:Test methods—Test Kb:Salt mist,cyclic(sodium chloride solution)
GB/T 2423.18-2021 Environmental testing—Part 2:Test methods—Test Kb:Salt mist,cyclic(sodium chloride solution)
GB/T 11021-2007 Electrical insulation—Thermal classification
GB/T 11021-2014 Electrical insulation—Thermal evaluation and designation
GB/T 11026.1-2003 Electrical insulating materials-Properties of thermal endurance—Part 1:Ageing procedures and evaluation of test results
GB/T 11026.1-2016 Electrical insulating materials—Thermal endurance properties—Part 1:Ageing procedures and evaluation of test results
GB/T 20112-2006 Evaluation and qualification of electrical insulation systems
GB/T 20112-2015 Evaluation and qualification of electrical insulation systems
GB/T 21414-2008 Railway applications—Rolling stock—Protective provisions against electrical hazards
GB/T 21414-2021 Railway applications—Rolling stock—Protective provisions against electrical hazards
GB/T 21563-2008 Railway applications—Rolling stock equipment—Shock and vibration tests
GB/T 21563-2018 Railway applications—Rolling stock equipment—Shock and vibration tests
GB/T 24338.4-2009 Railway applications—Electromagnetic compatibility—Part 3-2:Rolling stock—Apparatus
GB/T 24338.4-2018 Railway applications—Electromagnetic compatibility—Part 3-2:Rolling stock—Apparatus
GB/T 25890.1-2010 Railway applications—Fixed installations—DC switchgear—Part 1:General
GB/T 32350.1-2015 Railway applications—Insulation coordination—Part 1:Basic requirements—Clearances and creepage distances for all electrical and electronic equipment
GB/T 1402-2025 Railway applications—Supply voltages of traction systems
GB/T 32350.1-2025 Railway applications—Insulation coordination—Part 1:Basic requirements—Clearances and creepage distances for all electrical and electronic equipment
GB/T 25890.1-2026 Railway applications—Fixed installations—DC switchgear—Part 1:General
Adopt standards
IEC 60077-1:2017
Related Standards
GB/T 3318-1982
Replaced
GB/T 3318-1982 Rules for the inspecting and testing of electric locomotives after completion of construction
GB/T 6927-1986
Abolished
GB/T 6927-1986 Characteristics and tests of electrodynamic and electromagnetic braking systems
GB 1402-1998
Replaced
GB 1402-1998 A.C.Voltage of electric traction for the railway main lines
GB/T 3319-1998
Replaced
GB/T 3319-1998 Definition of the rated output of electric locomotives and motive power units
GB 5914.1-2000
Replaced