GB/T 29549.2-2013 Specifications for offshore modular drilling rigs on fixed platforms—Part 2:Construction

GB/T 29549.1-2013 Specifications for offshore modular drilling rigs on fixed platforms—Part 1:Design GB/T 29549.3-2013 Specifications for offshore modular drilling rigs on fixed platforms—Part 3:Hook-up,commissioning and acceptance

GB 7691-2003 Safety code for painting—Safety management general rule GB 7691-2025 General rules for safety management of coating operations GB/T 8423-1997 Glossary of oil field drilling and production equipment and oil country tubular goods terminology GB/T 8423-2008 Glossary of oil field drilling and production equipment and oil country tubular goods terminology GB/T 8423.1-2018 Petroleum and natural gas industries terminology—Part 1:Exploration and development GB/T 8423.2-2018 Petroleum and natural gas industries terminology—Part 2:Engineering technical GB/T 8423.3-2018 Petroleum and natural gas industries terminology—Part 3:Oil-gas surface engineering GB/T 8423.4-2022 Petroleum and natural gas industries terminology—Part 4:Measurement and analysis of petroleum and natural gas GB/T 8423.5-2017 Petroleum and natural gas industries terminology—Part 5:Equipment and material GB/T 8423.6-2020 Petroleum and natural gas industries terminology—Part 6:Safety and environmental protection and energy conservation GB/T 8923.1-2011 Preparation of steel substrates before application of paints and related products—Visual assessment of surface cleanliness—Part 1:Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings GB/T 8923.2-2008 Preparation of steel substrates before application of paints and related products—Visual assessment of surface cleanliness—Part 2:Preparation grades of previously coated steelsubstrates after localized removal of previous coatings GB/T 8923.3-2009 Preparation of steel substrates before application of paints and related products—Visual assessment of surface cleanliness—Part 3:Preparation grades of welds,edges and other areas with surface imperfections GB/T 8923.4-2013 Preparation of steel substrates before application of paints and related products—Visual assessment of surface cleanliness—Part 4:Initial surface conditions,preparation grades and flash rust grades in connection with high-pressure water jetting GB/T 13288-1991 The assessment of profile grades of steel surface before application of paint and related products—Comparator GB/T 13288.1-2008 Preparation of steel substrates before application of paints and related products—Surface roughness characteristics of blast-cleaned substrates—Part 1:Specification and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces GB/T 13288.2-2011 Preparation of steel substrates before application of paints and related products—Surface roughness characteristics of blast-cleaned steel substrates—Part 2:Method for the grading of surface profile of abrasive blast-cleaned steel—Comparator procedure GB/T 13288.3-2009 Preparation of steel substrates before application of paints and related products—Surface roughness characteristics of blast-cleaned steel substrates—Part 3:Method for the calibration of ISO surface profile comparators and for the determination of surface profile—Focusing microscope procedure GB/T 13288.4-2013 Preparation of steel substrates before application of paints and related products—Surface roughness characteristics of blast-cleaned substrates—Part 4:Method for the calibration of ISO surface profile comparator and for the determination of surface profile—Stylus instrument procedure GB/T 13288.5-2009 Preparation of steel substrates before application of paints and related products—Surface roughness characteristics of blast-cleaned steel substrates—Part 5:Replica tape method for the determination of the surface profile GB 50166-2019 Standard for installation and acceptance of fire alarm system GB/T 29549.1-2013 Specifications for offshore modular drilling rigs on fixed platforms—Part 1:Design SY/T 0407-2012 Surface treatment specifications for steel before painting SY/T 0407-1997 Surface pretreatment specifications for steel before painting SY/T 0407-2024 Preparation specification for steel surface before painting SY/T 5612-2018 SY/T 5612-2018 Specification for drilling fluid solid control equipment for petroleum and natural gas drilling and production equipment SY/T 5612-2007 Specification for solids control equipments of drilling fluid SY/T 5612.1-1999 Drilling fluid purification system gas remover SY/T 5612.2-1999 Drilling fluid cleaning system and cleaner SY/T 5612.3-1999 Drilling fluid cleaning system, Cyclone SY/T 5612.4-1993 Drilling fluid shakers SY/T 5612.5-1993 Hook strip screens for drilling fluid shakers SY/T 5612.6-2003 Drilling fluid cleaning system, horizontal centrifuge SY/T 5964-2019 Drilling well control device combination, installation debugging and usage specifications SY/T 5964-2003 Drilling control equipment assembly, installation debugging, and maintenance SY/T 5964-2006 Combination installation adjustment and maintenance of well-control equipments SY/T 6223-2013 Drilling fluid purification equipment installation, operation, and maintenance SY/T 6223-1996 Installation, use, and maintenance of fixed control equipment SY/T 6223-2005 Drilling purification equipment installation, commissioning, operation and maintenance SY/T 6416-2014 Recommended practices for installation, operation, and maintenance of engines SY/T 6416-1999 Installing, maintaining, and operating an internal combustion engine is recommended to follow these methods SY/T 6461 SY/T 6586-2020 SY/T 6586-2020 Petroleum and natural gas drilling and production equipment: Drilling rig site installation and inspection SY/T 6586-2014 On-site installation and inspection of oil rigs SY/T 6586-2012 On-site installation and inspection of oil rigs SY/T 6586-2003 On-site installation and inspection of oil rigs SY/T 10002 SY/T 10008-2016 The corrosion control of the entire immersion area of the steel fixed oil production structure at sea SY/T 10008-2010 The corrosion control of steel fixed oil production structures at sea SY/T 10008-2000 The corrosion control of offshore fixed steel-made petroleum production platform SY/T 10010-2020 The recommended practices for the electrical system design, installation, and maintenance of fixed and floating offshore oil facilities in non-classified and Class I and II areas SY/T 10010-2012 The recommended practices for the electrical system design and installation of fixed and floating offshore oil facilities in non-classified and Class I and II areas SY/T 10030-2018 Recommended practices for planning, designing, and constructing offshore fixed platforms - Workload stress design method SY/T 10030-2002 Recommended practices for planning, designing, and constructing offshore fixed platforms - Workload stress design approach (Addendum 1) SY/T 10030-2000 Recommended practices for planning, designing, and manufacturing offshore fixed platforms - working stress design method SY/T 10042-2002 The recommended practices for designing and installing offshore production platform pipeline systems YB 3301-2005 The welded steel H-section