GB/T 17457-1998
Replaced
GB/T 37179-2018
Active
National standards
GB/T 37179-2018 Evaluation specification of anticorrosion engineering qualityfor desulfurization chimney
GB/T 37179-2018 Evaluation specification of anticorrosion engineering qualityfor desulfurization chimney
Basic Information
Standard Code:
GB/T 37179-2018
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Material protection
ICS Name:
Other processing and plating
Publish Date:
2018-12-28
Implement Date:
2019-11-01
Pages:
24 pages
Scope
This standard specifies the basic requirements for the quality assessment of the construction of wet desulfurization chimneys (flue pipes), coating-based anti-corrosion projects, fiber-reinforced plastic anti-corrosion projects, foam brick anti-corrosion projects, metal material-based anti-corrosion projects, acid-resistant castable anti-corrosion projects, and corrosion-resistant rubber anti-corrosion projects. This standard applies to the acceptance and evaluation of the construction quality of anti-corrosion projects for chimneys (flue pipes) after wet desulfurization.
Development Information
Referenced Standards
GB/T 15007-2017 Designations of corrosion-resistant alloy
GB 50078
GB/T 37187-2018 Technology requirement of the anti-corrosion materials for desulfurization chimneys
GB/T 983-1995 Stainless steel covered electrodes
GB/T 983-2012 Covered electrodes for manual metal arc welding of stainless and heat-resisting steels
GB/T 2054-2005 Nickel and nickel alloy sheets
GB/T 2054-2013 Nickel and nickel alloy plate and sheet
GB/T 2054-2023 Nickel and nickel alloy plate and sheet
GB/T 2577-1989 Test method for resin content of glass fiber reinforced plastics
GB/T 2577-2005 Test method for resin content of glass fiber reinforced plastics
GB 3186-1982 Sampling paint products
GB/T 3186-2006 Paints, varnishes and raw materials for paints and varnishes—Sampling
GB/T 3323-1987 Methods for radiographic inspection and classification of radiographs for fusion welded butt joints in steel
GB/T 3323-2005 Radiographic examination of fusion welded joints in metallic materials
GB/T 3323.1-2019 Non-destructive testing of welds—Radiographic testing—Part 1:X-and gamma-ray techniques with film
GB/T 3323.2-2019 Non-destructive testing of welds—Radiographic testing—Part 2:X-and gamma-ray techniques with digital detectors
GB/T 3620.1-1994 Designation and composition of titanium and titanium alloys
GB/T 3620.1-2007 Designation and composition of titanium and titanium alloys
GB/T 3620.1-2016 Designation and composition of titanium and titanium alloys
GB/T 3623-1998 Titanium and titanium alloy wire
GB/T 3623-2007 Titanium and titanium alloy wire
GB/T 3623-2022 Titanium and titanium alloy wire
GB/T 4842-1995 Pure argon
GB/T 4842-2006 Argon
GB/T 4842-2017 Argon
GB/T 5117-1995 Carbon steel covered electrodes
GB/T 5117-2012 Covered electrodes for manual metal arc welding of non-alloy and fine grain steels
GB/T 5118-1995 Low alloy steel covered electrodes
GB/T 5118-2012 Covered electrodes for manual metal arc welding of creep-resisting steels
GB/T 6052-1993 Commerial liquid carbon dioxide
GB/T 6052-2011 Industrial liquid carbon dioxide
GB/T 8547-1987 Titanium clad steel plate
GB/T 8547-2006 Titanium clad steel plate
GB/T 8547-2019 Titanium clad steel plate
GB/T 11345-1989 Method for manual ultrasonic testing and classification of testing results for ferritic steel welds
GB/T 11345-2013 Non-destructive testing of welds—Ultrasonic testing—Techniques,testing levels,and assessment
GB/T 11345-2023 Non-destructive testing of welds—Ultrasonic testing—Techniques, testing levels and assessment
GB/T 15620-1995 Nickel and nickel alloy welding wires
GB/T 15620-2008 Nickel and nickel alloy wires and rodes
GB/T 30811-2014 Glass fiber reinforced plastic chimney liners for coal-fired units
GB 50212-2014 Code for construction of building anticorrosive engineering
GB 50300-2013 Unified standard for constructional quality acceptance of building engineering
HG/T 20273-2011 Technical code for coating engineering of sparying polyurea protection materials
JGJ/T 200-2010 Technical specification for spray polyurea waterproofing
GB/T 15620-2025 Solid wire electrodes,solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys
GB/T 6052-2025 Industrial liquid carbon dioxide
Related Standards
GB/T 17458-1998
Abolished
GB/T 17458-1998 Ductile iron pipes—Centrifugal cement mortar lining—Composition controls of freshly applied mortar
JG/T 133-2000
Abolished
JG/T 133-2000 Fluorocarbon coatings on architectural aluminum extrusions and panels
GB/T 17457-2009
Replaced
GB/T 17457-2009 Ductile iron pipes and fittings—Cement mortar lining
GA 923-2011
Active
GA 923-2011 Specification of special police vehicle unified appearance coating
GB/T 26825-2011
Active