NB/T 10943-2022 Active Industry standards-Energy

NB/T 10943-2022 Tesing rules of active voltage sag curing device up to 10 kV

NB/T 10943-2022 Tesing rules of active voltage sag curing device up to 10 kV

Publish Date: 2022-05-13 Implement Date: 2022-11-13 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: NB/T 10943-2022
Standard Type: Industry standards
Standard Status: Active
is_force_gb: no
CCS Name: Basic standards and general methods
ICS Name: Comprehensive Electrical Engineering
Publish Date: 2022-05-13
Implement Date: 2022-11-13
Publisher: 国家能源局
Technical Committee: 全国电压电流等级和频率标准化技术委员会(SAC/TC 1)
Pages: 28 pages

Scope

本文件规定了有源型电压暂降治理设备(以下简称“治理设备”)的检测条件、检测装置和检测方法。本文件适用于10  kV及以下电压等级,基于电力电子变流技术实现电压暂降治理的交流设备。

Development Information

Drafting Units:

广东电网有限责任公司广州供电局电力试验研究院、中机生产力促进中心有限公司、电力工业电气设备质量检验测试中心、武汉科力源电气有限公司、上海交通大学、中国电力科学研究院有限公司、上海电器设备检测所有限公司、国网河南省电力公司电力科学研究院、国网湖北省电力有限公司电力科学研究院、深圳市盛弘电气股份有限公司、国网山西省电力公司电力科学研究院、国网浙江省电力有限公司电力科学研究院、云南电网有限责任公司电力科学研究院、国网北京市电力公司电力科学研究院、广西电网有限责任公司电力科学研究院、北京英博电气股份有限公司、深圳市中电电力技术股份有限公司、国网河北省电力有限公司电力科学研究院、国网辽宁省电力有限公司电力科学研究院、盾石磁能科技有限责任公司、武汉大学、福州大学、四川大学、广东电网有限责任公司电力科学研究院、国网江苏省电力有限公司电力科学研究院、西安爱科赛博电气股份有限公司、国网江苏省电力有限公司无锡供电分公司、国电南京自动化股份有限公司

Drafting Persons:

马智远、王勇、刘晶、许中、郭浩洲、瞿李锋、李睿、陶以彬、史贵风、唐钰政、李伟、林凤翔、李胜文、徐群伟、何鑫、贾东强、郭敏、姚彩娟、王昕、王磊、李平、张建平、周凯、孙建军、张逸、汪颖、王玲、陈兵、闫荣、陈平、丁明进

Word Count: 50 Thousand words Pages: 28 pages

Referenced Standards

GB 311.1-1997 Insulation co-ordination for high voltage transmission and distribution equipment GB/T 311.1-2012 Insulation co-ordination—Part 1:Definitions,principles and rules GB 1094.5-2003 Power transformers—Part 5:Ability to withstand short circuit GB/T 1094.5-2008 Power transformers—Part 5:Ability to withstand short circuit GB/T 2423.1-2001 Environmental testing for electric and electronic products—Part 2:—Test methods Tests A:Cold GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold GB/T 2423.2-2001 Environmental testing for electric and electronic products—Part 2:Test methods-Tests B:Dry heat GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat GB/T 2423.3-1993 Basic environmental testing procedures for electric and electronic products—Test Ca:Damp heat, steady state GB/T 2423.3-2006 Environmental testing for electric and electronic products—Part 2:Testing method—Test Cab:Damp heat, steady state GB/T 2423.3-2016 Environmental testing—Part 2:Testing method—Test Cab:Damp heat,steady state GB/T 2423.4-1993 Basic environmental testing procedures for electric and electronic products—Test Db:Damp heat, cyclic GB/T 2423.4-2008 Environmental testing for electric and electronic products—Part 2:Test method—Test Db:Damp heat,cyclic(12 h+12 h cycle) GB 4208-1993 Degrees of protection provided by enclosure (IP code) GB/T 4208-2008 Degrees of protection provided by enclosure(IP code) GB/T 4208-2017 Degrees of protection provided by enclosure(IP code) GB 4793.1-1995 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 1:General requirements GB 4793.1-2007 Safety requirements for electrical equipment for measurement, control, and laboratory use—Part 1:General requirements GB 4824-2004 Industrial, scientific and medical(ISM) radio-frequency equipment—Electromagnetic disturbance characteristics—Limits and methods of measurement GB 4824-2013 Industrial,scientific and medical(ISM) radio-frequency equipment—Disturbance characteristics—Limits and methods of measurement GB 4824-2019 Industrial,scientific and medical equipment—Radio-frequency disturbance characteristics—Limits and methods of measurement GB 4824-2025 Industrial, scientific and medical equipment—Radio-frequency disturbance characteristics—Limits and methods of measurement GB 7251.1-1997 Low-voltage switchgear and control gear assemblies—Part 1:Type-tested and partially type-tested assemblies GB 7251.1-2005 Low-voltage switchgear and control gear assemblies—Part 1:Type-tested and partially type-tested assemblies GB/T 7251.1-2013 Low-voltage switchgear and controlgear assemblies—Part 1:General rules GB/T 7251.1-2023 Low-voltage switchgear and controlgear assemblies—Part 1:General rules GB/T 11022-1999 Common specifications for high-voltage switchgear and control gear standards GB/T 11022-2011 Common specifications for high-voltage switchgear and controlgear standards GB/T 11022-2020 Common specifications for high-voltage alternating-current switchgear and controlgear standards GB/T 11287-2000 Electrical relays—Part 21:Vibration,shock,bump and seismic tests on measuring relays and protection equipment—Section one:Vibration tests(sinusoidal) GB/T 12325-2003 Power quality—Admissible deviation of supply voltage GB/T 12325-2008 Power quality—Deviation of supply voltage GB 12326-2000 Power quality-Voltage fluctuation and flicker GB/T 12326-2008 Power quality—Voltage fluctuation and flicker GB/T 14537-1993 Shock and bump tests on measuring relays and protection equipment GB/T 14549-1993 Quality of electric energy supply—Harmonics in public supply network GB/T 15543-1995 Quality of electric energy supply—Admissible three-phase voltage unbalance factor GB/T 15543-2008 Power quality—Three-phase voltage unbalance GB/T 15945-1995 Quality of electric energy supply—Permissible deviation of frequency for power system GB/T 15945-2008 Power quality—Frequency deviation for power system GB/T 16927.1-1997 High-voltage test techniques Part 1:General test requirements GB/T 16927.1-2011 High-voltage test techniques—Part 1:General definitions and test requirements GB/T 17626.2-1998 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test GB/T 17626.2-2006 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test GB/T 17626.2-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test GB/T 17626.3-1998 Electromagnetic compatibility—Testing and measurement techniques-Radiated, radio-frequency, electromagnetic field immunity test GB/T 17626.3-2006 Electromagnetic compatibility—Testing and measurement techniques—Radiated, radio-frequency, electromagnetic field immunity test GB/T 17626.3-2016 Electromagnetic compatibility—Testing and measurement techniques—Radiated,radio-frequency,electromagnetic field immunity test GB/T 17626.3-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 3:Radiated,radio-frequency,electromagnetic field immunity test GB/T 17626.4-1998 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test GB/T 17626.4-2008 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test GB/T 17626.4-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burstimmunity test GB/T 17626.5-1999 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test GB/T 17626.5-2008 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test GB/T 17626.5-2019 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test GB/T 17626.6-1998 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances, induced by radio-frequency fields GB/T 17626.6-2008 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields GB/T 17626.6-2017 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields GB/T 17626.11-1999 Electromagnetic compatibility—Testing and measurement techniques—Voltage dips, short interruptions and voltage variations immunity tests GB/T 17626.11-2008 Electromagnetic compatibility—Testing and measurement techniques—Voltage dips,short interruptions and voltage variations immunity tests GB/T 17626.11-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 11:Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase GB/T 17626.12-1998 Electromagnetic compatibility—Testing and measurement techniques—Oscillatory waves immunity test GB/T 17626.12-2013 Electromagnetic compatibility—Testing and measurement techniques—Ring wave immunity test GB/T 17626.12-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 12:Ring wave immunity test GB/T 17626.30-2012 Electromagnetic compatibility—Testing and measurement techniques—Power quality measurement methods GB/T 17626.30-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 30:Power quality measurement methods GB/T 19862-2016 General requirements for monitoring equipment of power quality GB/T 20840.2-2014 Instrument transformers—Part 2:Additional requirements for current transformers GB/T 20840.3-2013 Instrument transformers—Part 3:Additional requirements for inductive voltage transformers GB/T 30137-2013 Power quality—Voltage dips and short interruptions GB/T 30137-2024 Power quality—Voltage swell,voltage dips and short interruptions

Related Standards

Contact Us