GB/T 6595-1986
Replaced
T/SHPTA 049-2023
Active
Group standards
T/SHPTA 049-2023 High impact polystyrene reinforced with glass fibers modified polypropylene particles
T/SHPTA 049-2023 High impact polystyrene reinforced with glass fibers modified polypropylene particles
Price:
$ 24.00
Basic Information
Standard Code:
T/SHPTA 049-2023
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Synthetic resins and plastics
ICS Name:
Thermoplastic plastics
Publish Date:
2023-08-10
Implement Date:
2023-09-10
Pages:
12 pages
Scope
This document provides the terms and definitions, naming rules, technical requirements, test methods, inspection rules, marking, packaging, transportation, and storage for high impact-resistant glass fiber-reinforced modified polypropylene particles.
This document is applicable to the production and inspection of glass fiber-reinforced polypropylene particle materials obtained by extrusion granulation using polypropylene as the base material, by adding different proportions of glass fiber and other additives.
Development Information
Referenced Standards
GB/T 1040.2-2006 Plastics—Determination of tensile properties—Part 2:Test conditions for moulding and extrusion plastics
GB/T 1040.2-2022 Plastics—Determination of tensile properties—Part 2:Test conditions for moulding and extrusion plastics
GB/T 1634.2-2004 Plastics—Determination of temperature of deflection under load—Part 2:Plastics,ebonite and long-fibre-reinforced composites
GB/T 1634.2-2019 Plastics—Determination of temperature of deflection under load—Part 2:Plastics and ebonite
GB/T 1843-1996 Plastics—Determination of izod impact strength
GB/T 1843-2008 Plastics—Determination of izod impact strength
GB/T 2547-1981 Plastic resins—Sampling
GB/T 2547-2008 Plastic resins—Sampling
GB/T 2918-1998 Plastics—Standard atmospheres for conditioning and testing
GB/T 2918-2018 Plastics—Standard atmospheres for conditioning and testing
GB/T 3682.1-2018 Plastics—Determination of the melt mass-flow rate(MFR)and melt volume-flow rate(MVR)of thermoplastics—Part 1:Standard method
GB/T 9341-2000 Plastics—Determination of flexural properties
GB/T 9341-2008 Plastics—Determination of flexural properties
GB/T 17037.1-1997 Injection moulding of test specimens of thermoplastic materials—Part 1:General principles and moulding of multipurpose and bar test specimens
GB/T 17037.1-2019 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 1:General principles,and moulding of multipurpose and bar test specimens
GB/T 26572-2011 Requirements of concentration limits for certain restricted substances in electrical and electronic products
SH/T 1541.1-2019 Plastic particle appearance test method - Part 1: Visual method
SJ/T 11364-2006 Marking for control of pollution caused by electronic information products
SJ/T 11364-2024 The labeling requirements for the restricted use of harmful substances in electrical and electronic products
GB 26572-2025 Requirements for restricted use of hazardous substances in electrical and electronic products
Related Standards
GB/T 6598-1986
Active
GB/T 6598-1986 Determination of weight-average molecular weight of polystyrene standards by low angle laser light scattering method
GB/T 6599-1986
abolished_transferred
GB/T 6599-1986 Determination of molecular weight averages and molecular weight distribution of polystyrene standards by steric exclusion chromatography
GB/T 8330-1987
Replaced
GB/T 8330-1987 Method for the determination of true density of ion exchange resins in wet state
GB/T 8331-1987
Replaced
GB/T 8331-1987 Method for the determination of bulk density of ion exchange resins in wet state
GB/T 8324-1987
Replaced