GB 10395.19-2010 Active National standards force_standard

GB 10395.19-2010 Agricultural and forestry machinery—Safety—Part 19:Centre pivot and moving lateral types irrigation machines

Publish Date: 2010-12-01 Implement Date: 2011-10-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB 10395.19-2010

Standard Type: National standards

Standard Status: Active

is_force_gb: yes

CCS Name: Agricultural machinery and equipment

ICS Name: Irrigation and drainage equipment

Publish Date: 2010-12-01

Implement Date: 2011-10-01

Pages: 13 pages

Scope

This part of GB 10395 specifies the safety requirements and determination methods for the design and manufacture of electric center-pivot and translational irrigation machines, and also stipulates the types of safety operation information that manufacturers should provide.
Note: Figures 1 to 5 show schematic diagrams of these irrigation machines.
This part applies to center-pivot and translational irrigation machines.
This part does not address the hazards caused by the pumps used in center-pivot and translational irrigation machines (hereinafter referred to as "irrigation machines"), nor does it address the hazards caused by the use of irrigation machines to spray pesticides and liquid fertilizers.
This part does not consider environmental factors.

Development Information

Word Count: 22 Thousand words Pages: 13 pages

Same series standard

Referenced Standards

GB 10395.1-2009 Agricultural and forestry machinery—Safety—Part 1:General requirements GB/T 15706.1-2007 Safety of machinery—Basic concepts, general principles for design—Part 1:Basic terminology, methodology GB/T 15706.2-2007 Safety of machinery—Basic concepts, general principles for design—Part 2:Technical principles GB/T 23821-2009 Safety of machinery—Safety distances to prevent hazard zones being reached by upper and lower limbs EN 12325-2:1999 GB 4208-1993 Degrees of protection provided by enclosure (IP code) GB/T 4208-2008 Degrees of protection provided by enclosure(IP code) GB/T 4208-2017 Degrees of protection provided by enclosure(IP code) GB 5226.1-2002 Safety of machinery—Electrical equipment of machines—Part 1:General requirements GB 5226.1-2008 Electrical safety of machinery—Electrical equipment of machines—Part 1:General requirements GB/T 5226.1-2019 Electrical safety of machinery—Electrical equipment of machines—Part 1:General requirements

Adopt standards

EN 909:1998

Related Standards

GB/T 17187-1997 Replaced

GB/T 17187-1997 Agricultural irrigation equipment—Emitter—Specification and test methods

Publish Date: 1997-12-26

GB/T 17188-1997 Replaced

GB/T 17188-1997 Agricultural irrigation equipment—Emitting-pipe systems—Specification and test methods

Publish Date: 1997-12-26

GB/T 18025-2000 Active

GB/T 18025-2000 Agricultural irrigation—Wiring and equipment for electrically driven or controlled irrigation machines

Publish Date: 2000-03-16

GB/T 12785-2002 Replaced

GB/T 12785-2002 Test methods for submersible motor-pumps

Publish Date: 2002-03-10

GB/T 18687-2002 Replaced

GB/T 18687-2002 Agricultural irrigation equipment—Sprayers—General requirements and test method

Publish Date: 2002-03-10

GB/T 18688-2002 Replaced

GB/T 18688-2002 Agricultural irrigation equipment—Pressure losses in irrigation valves—Test method

Publish Date: 2002-03-10