GB 10395.23-2010 Active National standards force_standard

GB 10395.23-2010 Agricultural and forestry machinery—Safety—Part 23:Silos stationary unloaders for round silos

GB 10395.23-2010 Agricultural and forestry machinery—Safety—Part 23:Silos stationary unloaders for round silos

Publish Date: 2010-12-01 Implement Date: 2011-10-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB 10395.23-2010

Standard Type: National standards

Standard Status: Active

is_force_gb: yes

CCS Name: Agricultural and sideline products and feed processing machinery

ICS Name: Buildings and equipment for the processing and storage of agricultural products

Publish Date: 2010-12-01

Implement Date: 2011-10-01

Pages: 16 pages

Scope

This part of GB 10395 specifies the safety requirements for the design and manufacture of unloaders installed in fixed circular silage pits for discharging silage and similar feedstuffs (hereinafter referred to as "unloaders"), and also stipulates the types of safety operation information that manufacturers should provide. This part does not specify the technical requirements for the installation or removal of unloaders when moving silage pits.
This part applies to low-speed electric silage pit unloaders that operate on the upper surface of the silage feed layer.
This part only addresses the hazards posed by the unloaders, and does not address the hazards posed by the silage pit system itself (for example, the hazards posed by the generation of gases).
This part does not consider environmental factors.

Development Information

Word Count: 28 Thousand words Pages: 16 pages

Same series standard

GB 10395.2-2010 Agricultural and forestry machinery—Safety—Part 2:Trailers with tipping body GB 10395.3-2010 Agricultural and forestry machinery—Safety—Part 3:Manure spreaders GB 10395.16-2010 Agricultural and forestry machinery—Safety—Part 16:Potato harvesters GB 10395.17-2010 Agricultural and forestry machinery—Safety—Part 17:Beet harvesters GB 10395.18-2010 Agricultural and forestry machinery—Safety—Part 18:Reel machines for irrigation GB 10395.19-2010 Agricultural and forestry machinery—Safety—Part 19:Centre pivot and moving lateral types irrigation machines GB 10395.20-2010 Agricultural and forestry machinery—Safety—Part 20:Pick-up balers GB 10395.21-2010 Agricultural and forestry machinery—Safety—Part 21:Tedders and swath rakes with powered tools GB/T 10395.22-2010 Agricultural and forestry machinery—Safety—Part 22:Front loaders GB 10395.24-2010 Agricultural and forestry machinery—Safety—Part 24:Slurry tankers

Referenced Standards

GB/T 4208-2008 Degrees of protection provided by enclosure(IP code) GB/T 5013.4-2008 Rubber insulated cables of rated voltages up to and including 450/750 V—Part 4:Cords and flexible cables GB 5226.1-2002 Safety of machinery—Electrical equipment of machines—Part 1:General requirements GB 10395.1-2009 Agricultural and forestry machinery—Safety—Part 1:General requirements GB/T 14048.5-2008 Low-voltage switchgear and controlgear—Part 5-1:Control circuit devives and switching element—Electromechanical control circuit devices GB/T 15706.1-2007 Safety of machinery—Basic concepts, general principles for design—Part 1:Basic terminology, methodology GB/T 15706.2-2007 Safety of machinery—Basic concepts, general principles for design—Part 2:Technical principles GB/T 16855.1-2008 Safety of machinery—Safety-related parts of control systems—Part 1:General principles for design GB/T 18831-2010 Safety of machinery—Interlocking devices associated with guards—Principles for design and selection GB/T 23821-2009 Safety of machinery—Safety distances to prevent hazard zones being reached by upper and lower limbs GB 14048.4-2003 Low-voltage switchgear and controlgear—Electromechanical contactors and motor-starters GB/T 14048.4-2010 Low-voltage switchgear and controlgear—Part 4-1:Contactors and motor-starters—Electromechanical contactors and motor-starters(Including motor protector) GB/T 14048.4-2020 Low-voltage switchgear and controlgear—Part 4-1:Contactors and motor-starters—Electromechanical contactors and motor-starters(Including motor protector) GB 16754-1997 Safety of machinery—Emergency stop—Principles for design GB/T 16754-2008 Safety of machinery—Emergency stop—Principles for design GB/T 16754-2021 Safety of machinery—Emergency stop function—Principles for design GB 16895.27-2006 Electrical installations of buildings—Part 7:Requirements for special installations or locations—Section 705—Electrical installations of agricultural and horticultural premises GB/T 16895.27-2012 Low-voltage electrical installations—Part 7-705:Requirements for special installations or locations—Agricultural and horticultural premises

Adopt standards

EN 1374:2000

Related Standards

GB/T 6970-1986 Replaced

GB/T 6970-1986 Testing methods for grain dryer

Publish Date: 1986-11-01

GB/T 6971-1986 Replaced

GB/T 6971-1986 Test method for feed mills

Publish Date: 1986-11-01

GB/T 12994-1991 Replaced

GB/T 12994-1991 Seed processing machinery—Terminology

Publish Date: 1991-08-23

GB/T 17237-1998 Replaced

GB/T 17237-1998 The general technical conditions for animal slaughtering

Publish Date: 1998-03-02

GB/T 17913-1999 Replaced

GB/T 17913-1999 Phosphine recirculation equipment for grain storages

Publish Date: 1999-11-22

NY/T 647-2002 Active

NY/T 647-2002 Quality appraising standard for steel plate silo

Publish Date: 2002-12-30