GB/T 18244-2000
Replaced
GB/T 19250-2013
Active
National standards
GB/T 19250-2013 Polyurethane waterproofing coating
GB/T 19250-2013 Polyurethane waterproofing coating
Basic Information
Standard Code:
GB/T 19250-2013
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Roofing and paving waterproofing and moistureproof materials
ICS Name:
Waterproof
Publish Date:
2013-11-27
Implement Date:
2014-08-01
Pages:
13 pages
Scope
This standard specifies the classification, general requirements, technical requirements, test methods, inspection rules, marking, packaging, transportation, and storage of polyurethane waterproof coatings (referred to as PU waterproof coatings).
This standard applies to polyurethane waterproof coatings used for engineering waterproofing.
Development Information
Replace the following standards
Referenced Standards
GB/T 529-2008 Rubber,vulcanized or thermoplastic—Determination of tear strength(Trouser,angle and crescent test pieces)
GB/T 531.1-2008 Rubber,vulcanized or thermoplastic—Determination of indentation hardness—Part 1:Duromerer method(Shore hardness)
GB/T 1768-2006 Paints and varnishes—Determination of resistance to abrasion—Rotating abrasive rubber wheel method
GB/T 8626-2007 Test method of flammability for building materials
GB/T 16777-2008 Test methods for building waterproofing coatings
GB/T 18244-2000 Test methods for resistance to weathering of building water proofing materials
GB/T 20624.2-2006 Paints and varnishes—Rapid-deformation (impact resistance) tests—Part 2:Falling-weight test,small-area indenter
JC 1066-2008
GB/T 528-1998 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties
GB/T 528-2009 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties
GB 18582-2001 Indoor decorating and refurbishing materials—Limit of harmful substances of interior architectural coatings
GB 18582-2008 Indoor decorating and refurbishing materials—Limit of harmful substances of interior architectural coatings
GB 18582-2020 Limit of harmful substances of architectural wall coatings
JC/T 975-2005 Waterproofing coating for concrete bridge and road surface
Related Standards
GB/T 19889.7-2005
Replaced
GB/T 19889.7-2005 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 7:Field measurements of impact sound insulation of floors
GB/T 19889.1-2005
Active
GB/T 19889.1-2005 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 1:Requirements for laboratory test facilities with suppressed flanking transmission
GB/T 19889.2-2005
Abolished
GB/T 19889.2-2005 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 2:Determination,verification and application of precision data
GB/T 19889.3-2005
Replaced
GB/T 19889.3-2005 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 3:Laboratory measurements of airborne sound insulation of building elements
GB/T 19889.4-2005
Active