GB/T 4146-1984
Replaced
FZ/T 54033-2010
Replaced
Industry standards-Textiles
FZ/T 54033-2010 Polyamide 6 high oriented yarns
FZ/T 54033-2010 Polyamide 6 high oriented yarns
Basic Information
Standard Code:
FZ/T 54033-2010
Standard Type:
Industry standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Chemical fibers
ICS Name:
Artificial fibers
Publish Date:
2010-12-29
Implement Date:
2011-04-01
Pages:
7 pages
Scope
This standard specifies the terms and definitions, classification and marking, technical requirements, test methods, inspection rules, marking, packaging, transportation, and storage requirements for high-oriented nylon 6 filament (HOY).
This standard applies to high-oriented nylon 6 filament (HOY) for civilian use, with a linear density of 8 dtex to 400 dtex, a single filament linear density greater than 1 dtex, a circular cross-section, and glossy, semi-matte, or fully matte filaments, as well as composite filaments, which are untwisted and not subject to compression and washing treatments.
Development Information
Superseded by the following standards
Referenced Standards
GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB 250-1995 Gray scale for assessing change in colour
GB/T 250-2008 Textiles—Tests for colour fastness—Grey scale for assessing change in colour
GB/T 3291.1-1997 Textiles—Terms of textiles material properties and test—Part 1:Fibre and yarn
GB/T 3291.3-1997 Textiles—Terms of textiles material properties and test—Part 3:General
GB/T 4146.1-2009 Textiles—Man-made fibres—Part 1:Generic names
GB/T 4146.1-2020 Textiles—Man-made fibres—Part 1:Generic names
GB/T 6502-2001 Sampling method for synthetic filament yarns
GB/T 6502-2008 Sampling method of man-made filament yarns
GB/T 6503-2001 Test method for moisture regain in synthetic filament yarns
GB/T 6503-2008 Testing method for moisture regain of man-made fibres
GB/T 6503-2017 Man-made fibres—Test method of moisture regain
GB/T 6505-2001 Test method for thermal shrinkage of synthetic filament yarns
GB/T 6505-2008 Testing method for thermal shrinkage of man-made filament yarns
GB/T 6505-2017 Man-made fiber—Test method for thermal shrinkage of filament yarns(after treatment）
GB/T 8170-1987 Rules for rounding off of numberical values
GB/T 8170-2008 Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 14343-2003 Testing method for linear density of synthetic filament yarns
GB/T 14343-2008 Testing method for linear density of man-made filament yarns
GB/T 14344-2003 Testing method for drawability of synthetic filament yarns
GB/T 14344-2008 Testing method for tensile of man-made filament yarns
GB/T 14344-2022 Man-made fibre—Test method for tensile properties of filament yarns
GB/T 14346-1993 Testing method for yarn irregularity of man-made filament yarns by means of electronic evenness tester
GB/T 14346-2015 Man-made fiber—Testing method for unevenness of filament yarns—Capacitance method
FZ/T 50008-1996 The test method for uniform dyeing of polyamide filament
FZ/T 50008-2015 Test method for dyeing uniformity of polyamide filament yarns
Related Standards
GB/T 6509-1986
Replaced
GB/T 6509-1986 Method for determination of low molecular weight compounds content in polyamide 6
GB/T 9997-1988
Replaced
GB/T 9997-1988 Man-made fibres—Determination of breaking strength and elongation of individual fibres
GB/T 14334-1993
Replaced
GB/T 14334-1993 Sampling method of synthetic staple fibres
GB/T 14335-1993
Replaced
GB/T 14335-1993 Testing method for linear density of synthetic staple fibres
GB/T 14336-1993
Replaced