GB/T 902.2-2010 Replaced National standards

GB/T 902.2-2010 Threaded studs for drawn arc stud welding with ceramic ferrule

GB/T 902.2-2010 Threaded studs for drawn arc stud welding with ceramic ferrule

Publish Date: 2011-01-10 Implement Date: 2011-10-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 902.2-2010

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Fasteners

ICS Name: Bolts, screws, and studs

Publish Date: 2011-01-10

Implement Date: 2011-10-01

Pages: 16 pages

Scope

This part of GB/T 902 specifies threaded studs (PD type) and threaded studs with retractable rods (RD type) for arc stud welding with thread sizes of M6 to M24, as well as internal threaded studs (ID type) for arc stud welding with sizes of M5 to M12, and magnetic rings (PF, RF, and UF types) used with them.
For a comparison of the product types specified in ISO 13918 with those in Chinese standards, please refer to Appendix A.

Development Information

Word Count: 21 Thousand words Pages: 16 pages

Same series standard

GB/T 902.4-2010 Threaded studs with flange(pitch)and stud with internal thread for short-cycle drawn arc stud welding

Replace the following standards

GB/T 902.2-1989

Superseded by the following standards

GB/T 10433-2024 Fasteners—Studs and ceramic ferrules for arc stud welding

Referenced Standards

GB/T 90.1-2002 Fasteners—Acceptance inspection GB/T 90.1-2023 Fasteners—Acceptance inspection GB/T 90.2-2002 Fasteners—Marking and packaging GB/T 1237-2000 Designation system for fasteners GB/T 3098.1-2000 Mechanical properties of fasteners—Bolts, screws and studs GB/T 3098.1-2010 Mechanical properties of fasteners—Bolts,screws and studs GB/T 3098.6-2000 Mechanical properties of fasteners—Bolts, screws and studs made of stainless-steel GB/T 3098.6-2014 Mechanical properties of fasteners—Stainless steel Bolts,screws and studs GB/T 3098.6-2023 Mechanical properties of fasteners—Stainless steel bolts,screws and studs GB/T 3103.1-2002 Tolerances for fasteners—Bolts, screws, studs and nuts

Adopt standards

ISO 13918:2008

Related Standards

GB/T 3750.3-1983 Replaced

GB/T 3750.3-1983 Hollow screws

Publish Date: 1983-06-17

GB/T 5277-1985 Active

GB/T 5277-1985 Fasteners—Clearance holes for bolts and screws

Publish Date: 1985-08-01

GB/T 6560-1986 Replaced

GB/T 6560-1986 Cross recessed pan head thread forming screws

Publish Date: 1986-07-02

GB/T 6561-1986 Replaced

GB/T 6561-1986 Cross recessed countersunk head thread forming screws

Publish Date: 1986-07-02

GB/T 6562-1986 Replaced

GB/T 6562-1986 Cross recessed raised countersunk head thread forming screws

Publish Date: 1986-07-02

GB/T 6563-1986 Replaced

GB/T 6563-1986 Hexagon head thread forming screws

Publish Date: 1986-07-02