GB/T 33774-2017 Active National standards

GB/T 33774-2017 Gas for electronic industry—Propylene

Publish Date: 2017-05-31 Implement Date: 2017-12-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 33774-2017

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Industrial gases and chemical gases

ICS Name: Industrial gases

Publish Date: 2017-05-31

Implement Date: 2017-12-01

Pages: 5 pages

Scope

This standard specifies the technical requirements, test methods, packaging, marking, storage and transportation, and safety of propylene. This standard applies to propylene used in the electronics industry, which is prepared by purification using adsorption and distillation methods from industrial propylene. It is mainly used in the field of semiconductor technology. Molecular formula: C3H6. Relative molecular mass: 42.081 (based on the 2011 International Relative Atomic Mass).

Development Information

Word Count: 9 Thousand words Pages: 5 pages

Referenced Standards

危险化学品安全管理条例特种设备安全监察条例 GB 190-1990 Labels for packages of dangerous goods GB 190-2009 Packing symbol of dangerous goods GB/T 3723-1999 Sampling of chemical products for industrial use—Safety in sampling GB/T 5099-1994 Seamless steel gas cylinders GB/T 5099.1-2017 Seamless steel gas cylinders—Part 1:Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa GB/T 5099.3-2017 Seamless steel gas cylinders—Part 3:Normalized cylinders GB/T 5099.4-2017 Seamless steel gas cylinders—Part 4:Seamless stainless steel gas cylinders GB 5100-1994 Welded steel gas cylinders GB/T 5100-2011 Welded steel gas cylinders GB/T 5100-2020 Welded steel gas cylinders GB/T 5832.3-2011 Determination of moisture in gases—Part 3:The method of Cavity Ring-Down Spectroscopy GB 7144-1999 Colored cylinder mark for gases GB/T 7144-2016 Coloured cylinder mark for gases GB/T 7716-2002 Propylene for industrial use—Specification GB/T 7716-2014 Propylene for polymerization—Specification GB/T 7716-2024 Propylene for polymerization GB 14193-1993 Rules for filling of liquefied gas cylinders GB/T 14193-2009 Rules for filling of liquefied gas cylinders GB 15258-1999 General rules for preparation of precautionary label for industrial chemicals GB 15258-2009 General rules for preparation of precautionary label for chemicals GB 16804-1997 Precautionary labels for gas cylinders GB/T 16804-2011 Precautionary labels for gas cylinders GB/T 6571-1995 Semiconductor devices—Discrete devices—Part 3:Signal(including switching)and regulator diodes GB/T 28726-2012 Gas analysis—Gas chromatograph with helium ionization detector TSG R0006-2014 Supervision Regulation on Safety Technology for Gas Cylinder GB/T 14193.1-2025 Rules for the filling of liquefied gas cylinders—Part1:Industrial gas cylinder GB/T 5832.3-2025 Gas analysis—Determination of moisture in gases—Part 3:The method of cavity ring-down spectroscopy GB/T 28726-2025 Gas analysis—Gas chromatograph with helium ionization detector

Related Standards

GB 4962-1985 Replaced

GB 4962-1985 Technical safety regulation for gaseous hydrogen use

Publish Date: 1985-03-01

GB/T 8981-1988 Replaced

GB/T 8981-1988 Determination of trace hydrogen in gases—Gas chromatographic method

Publish Date: 1988-03-15

GB/T 10627-1989 Replaced

GB/T 10627-1989 Gas analysis—Preparation of calibration gas mixtures—Static volumetric methods

Publish Date: 1989-03-01

GB/T 10628-1989 Replaced

GB/T 10628-1989 Gas analysis—Determination of composition of calibration gas mixtures—Comparison methods

Publish Date: 1989-03-22

GB 13548-1992 Replaced

GB 13548-1992 General principle of safety assessment for phosgene and its products plant

Publish Date: 1992-06-29

GB 13591-1992 Replaced

GB 13591-1992 Rules for the filling of dissolved acetylene

Publish Date: 1992-08-05