GB/T 5100-2011 Replaced National standards

GB/T 5100-2011 Welded steel gas cylinders

GB/T 5100-2011 Welded steel gas cylinders

Publish Date: 2011-07-20 Implement Date: 2012-06-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 5100-2011

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Pressure vessel

ICS Name: Pressure vessels, gas cylinders

Publish Date: 2011-07-20

Implement Date: 2012-06-01

Pages: 31 pages

Scope

This standard specifies the basic parameters, technical requirements, test methods, inspection rules, marking, packaging, transportation, storage, etc. of steel welded gas cylinders (hereinafter referred to as "steel cylinders").
This standard applies to steel cylinders used in normal environmental temperatures of -40 °C to 60 °C, with a water pressure test pressure not exceeding 12 MPa (gauge pressure) and a nominal volume of 1 L to 1,000 L, which can be refilled with low-pressure liquefied gases and their mixtures with compressed gases.
This standard also applies to the cylinder bodies of steel cylinders for industrial liquefied petroleum gas and dissolved acetylene gas specified in GB 11174.

Development Information

Word Count: 60 Thousand words Pages: 31 pages

Replace the following standards

GB 5100-1994 Welded steel gas cylinders GB 17673-1999 Welded steel cylinders for liquefied propylene and propane gases

Superseded by the following standards

GB/T 5100-2020 Welded steel gas cylinders

Referenced Standards

GB 150-1998 Steel pressure vessels GB/Z 150-2025 Guide for magnetizing behaviour of permanent magnets GB/T 150.1-2011 Pressure vessels—Part 1:General requirements GB/T 150.1-2024 Pressure vessels—Part 1:General requirements GB/T 150.2-2011 Pressure vessels—Part 2:Materials GB/T 150.2-2024 Pressure vessels—Part 2:Materials GB/T 150.3-2011 Pressure vessels—Part 3:Design GB/T 150.3-2024 Pressure vessels—Part 3:Design GB/T 150.4-2011 Pressure vessels—Part 4:Fabrication,inspection and testing,and acceptance GB/T 150.4-2024 Pressure vessels—Part 4:Fabrication,inspection and testing,and acceptance GB/T 228-2002 Metallic materials—Tensile testing at ambient temperature GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature GB/T 228.2-2015 Metallic materials—Tensile testing—Part 2:Method of test at elevated temperature GB/T 228.3-2019 Metallic materials—Tensile testing—Part 3:Method of test at low temperature GB/T 228.4-2019 Metallic materials—Tensile testing—Part 4:Method of test in liquid helium GB/T 229-1994 Metallic materials—Charpy notch impact test GB/T 229-2007 Metallic materials—Charpy pendulum impact test method GB/T 229-2020 Metallic materials—Charpy pendulum impact test method GB/T 232-1999 Metallic materials—Bend test GB/T 232-2010 Metallic materials—Bend test GB/T 232-2024 Metallic materials—Bend testing method GB/T 1804-2000 General tolerances for linear and angular dimensions without individual tolerance indications GB 7144-1999 Colored cylinder mark for gases GB/T 7144-2016 Coloured cylinder mark for gases GB 8335-1998 Special threads for gas cylinders GB/T 8335-2011 Special threads for gas cylinders GB/T 9251-1997 Method for hydraulic test of gas cylinders GB/T 9251-2011 Methods for hydrostatic test of gas cylinders GB/T 9251-2022 Methods for hydrostatic test of gas cylinders GB/T 9252-2001 Method for cycling test of gas cylinders GB/T 9252-2017 Method for pressure cycling test of gas cylinders GB 11174-1997 Liquefied petroleum gases GB 11174-2011 Liquefied petroleum gases GB 11174-2025 Liquefied petroleum gases GB/T 12137-2002 Method for leakage test of gas cylinders GB/T 12137-2015 Methods for leakage test of gas cylinders GB/T 12137-2025 Methods for leakage test of gas cylinders GB/T 13005-1991 Terminology of gas cylinders GB/T 13005-2011 Terminology of gas cylinders GB 14193-1993 Rules for filling of liquefied gas cylinders GB/T 14193-2009 Rules for filling of liquefied gas cylinders GB/T 14193.1-2025 Rules for the filling of liquefied gas cylinders—Part1:Industrial gas cylinder GB 15383-1994 Outlet connections and sizes for cylinder valves GB/T 15383-2011 Connection types and dimensions for gas cylinder valve outlets GB 15385-1994 Method for hydraulic burst test of gas cylinders GB/T 15385-2011 Method for hydraulic burst test of gas cylinder GB/T 15385-2022 Method for hydraulic burst test of gas cylinder GB 17925-1999 Standard practice for X-ray real-time examination of cylinders weld GB/T 17925-2011 Standard practice for X-ray digital radioscopic examination of cylinder weld GB/T 17925-2024 Practice for X-ray digital radioscopic examination of cylinder weld JB/T 4730.1 JB/T 4730.2 JB/T 4730.3-2005 Nondestructive testing of pressure equipments—Part 3:Ultrasonic testing JB/T 4730.4-2005 Nondestructive testing of pressure equipments—Part 4:Magnetic particle testing JB/T 4730.5-2005 Nondestructive testing of pressure equipments—Part 5:Penetrant testing JB/T 4730.6-2005 Nondestructive testing of pressure equipments—Part 6:Eddy current testing JJG 14-1997 Nonself-indicating Weighing Instrument JJG 14-2016 Non-self-indicating Weighing Instruments

Adopt standards

ISO 4706:1989

Related Standards

GB/T 6058-1985 Replaced

GB/T 6058-1985 Method for preparation and internal pressure testing of filamentwound pressure vessels

Publish Date: 1985-05-28

GB 12136-1989 Abolished

GB 12136-1989 Arrester for dissolved acetylene cylinders

Publish Date: 1989-12-29

GB/T 13003-1991 Replaced

GB/T 13003-1991 Method for pneumatic test of dissolved acetylene cylinders

Publish Date: 1991-04-03

GB/T 13005-1991 Replaced

GB/T 13005-1991 Terminology of gas cylinders

Publish Date: 1991-04-30

GB 13076-1991 Replaced

GB 13076-1991 Periodic inspection and evaluation of dissolved acetylene cylinders

Publish Date: 1991-07-12

GB 13077-1991 Replaced

GB 13077-1991 Periodic inspection and evaluation of seamless aluminium alloy gas cylinders

Publish Date: 1991-07-12