GB/T 14598.7-1995
Abolished
GB/T 42151.3-2024
Active
National standards
GB/T 42151.3-2024 Communication networks and systems for power utility automation—Part 3:General requirements
GB/T 42151.3-2024 Communication networks and systems for power utility automation—Part 3:General requirements
Basic Information
Standard Code:
GB/T 42151.3-2024
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
The power system
ICS Name:
Substations, surge arrestors
Publish Date:
2024-10-26
Implement Date:
2025-05-01
Pages:
64 pages
Scope
This document specifies the general requirements for the construction, design, and environmental conditions of communication, automation, and intelligent electronic devices (IEDs) and systems in power plants and substations. These general requirements are consistent with the requirements of IEDs operating under similar conditions, such as measurement relays and protection devices.
When communication or automation IEDs are part of another device in a power plant or substation, the environmental requirements of that device apply to the communication equipment.
Development Information
Same series standard
GB/T 42151.4-2024 Communication networks and systems for power utility automation—Part 4:System and project management
GB/T 42151.6-2024 Communication networks and systems for power utility automation—Part 6:Configuration description language for communication in power utility automation systems related to IEDs
GB/T 42151.71-2024 Communication networks and systems for power utility automation—Part 7-1:Basic communication structure—Principles and models
GB/T 42151.72-2024 Communication networks and systems for power utility automation—Part 7-2:Basic information and communication structure—Abstract communication service interface(ACSI)
GB/Z 42151.77-2024 Communication networks and systems for power utility automation—Part 7-7:Machine-processable format of IEC 61850-related data models for tools
Referenced Standards
GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold
GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat
GB/T 2423.3-2016 Environmental testing—Part 2:Testing method—Test Cab:Damp heat,steady state
GB/T 2423.4-2008 Environmental testing for electric and electronic products—Part 2:Test method—Test Db:Damp heat,cyclic(12 h+12 h cycle)
GB/T 2423.22-2012 Environmental testing—Part 2:Test methods—Test N:Change of temperature
GB/T 12113-2023 Methods of measurement of touch current and protective conductor current
GB/T 14598.27-2017 Measuring relays and protection equipment—Part 27:Product safety requirements
GB/T 17626.2-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test
GB/T 17626.3-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 3:Radiated,radio-frequency,electromagnetic field immunity test
GB/T 17626.4-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burstimmunity test
GB/T 17626.5-2019 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test
GB/T 17626.8-2006 Electromagnetic compatibility—Testing and measurement techniques—Power frequency magnetic field immunity test
GB/T 17626.16-2007 Electromagnetic compatibility—Testing and measurement techniques—Test for immunity to conducted,common mode disturbances in the frequency range 0 Hz to 150 kHz
GB/T 17626.29-2006 Electromagnetic compatibility—Testing and measurement techniques—Voltage dips, short interruptions and voltage variations on d.c .input power port immunity tests
GB/T 19520.12-2009 Mechanical structures for electronic equipment—Dimensions of mechanical structures of the 482.6 mm (19 in) series—Part 3-101:Subracks and associated plug-in units
ISO 780:1997
ISO 7000
ISO 9772
IEC 60255-21(所有部分)
IEC 60255-21-1
IEC 60255-21-2
IEC 60255-21-3
IEC 60255-22-5
IEC 60255-26
IEC 60417
IEC 60529
IEC 60664-1
IEC 60695-2-20
IEC 60695-11-10
IEC 60825-1
IEC 61000(所有部分)
IEC 61000-4-6:2023
IEC 61000-4-11:2020
IEC 61000-4-17:2009
IEC 61000-4-18:2019
IEC 61010-1:2010
IEC 61180:2016
IEC 61850(所有部分)
IEC TS 61850-2:2019
IEC TR 61850-90-4
IEC 62271-1
CISPR 32
CISPR 35:2016
Adopt standards
IEC 61850-3:2013
Related Standards
GB/T 15576-1995
Replaced
GB/T 15576-1995 The specifications of low-voltage reactive power steady compensation equipments
GB 8286-1996
Replaced
GB 8286-1996 Mining flameproof movable substations
GB/T 16896.1-1997
Replaced
GB/T 16896.1-1997 Digital recorders for measurements in high—Voltage impulse tests—Part 1:Requirements for digital recorders
GB 2314-1997
Replaced
GB 2314-1997 General technical requirements for electric power fittings
GB/T 17467-1998
Replaced