GB/T 1972.2-2023 Active National standards

GB/T 1972.2-2023 Disc springs—Part 2:Technical specifications

GB/T 1972.2-2023 Disc springs—Part 2:Technical specifications

Publish Date: 2023-05-23 Implement Date: 2023-12-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Price: $ 113

Basic Information

Standard Code: GB/T 1972.2-2023

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: \nSpring

ICS Name: Spring

Publish Date: 2023-05-23

Implement Date: 2023-12-01

Pages: 37 pages

Scope

This document specifies the technical requirements for disc springs with a rectangular cross-section (hereinafter referred to as "disc springs"). It includes the structural types, size series, technical requirements, test methods, and inspection rules of disc springs.
This document is applicable to disc springs with an outer diameter not exceeding 250 mm and a thickness of 0.2 mm to 14 mm.
This document is not applicable to grooved disc springs, diaphragm disc springs, and disc springs of other structural forms.

Development Information

Word Count: 74 Thousand words Pages: 37 pages

Same series standard

GB/T 1972.1-2023 Disc spring—Part 1:Calculation

Replace the following standards

GB/T 1972-2005 Disc spring

Referenced Standards

GB/T 1972.1-2023 Disc spring—Part 1:Calculation YB/T 5058 GB/T 224-1987 Determination of depth of decarburization of steel GB/T 224-2008 Determination of depth of decarburization of steels GB/T 224-2019 Determination of the depth of decarburization of steels GB/T 230.1-2004 Metallic Rockwell hardness test—Part1:Test method(scales A、B、C、D、E、F、G、H、K、N、T) GB/T 230.1-2009 Metallic materials—Rockwell hardness test—Part 1:Test method(scales A、B、C、D、E、F、G、H、K、N、T) GB/T 230.1-2018 Metallic materials—Rockwell hardness test—Part 1:Test method GB/T 1222-1984 Spring steel GB/T 1222-2007 Spring steels GB/T 1222-2016 Spring steels GB/T 1800.2-1998 Limits and fits—Bases—Part 2:Basic rules of tolerances, deviations and fits GB/T 1800.2-2009 Geometrical Product Specifications (GPS)—Limits and fits—Part 2:Tables of standard tolerance grades and limit deviations for holes and shafts GB/T 1800.2-2020 Geometrical product specifications(GPS)—ISO code system for tolerances on linear sizes—Part 2:Tables of standard tolerance classes and limit deviations for holes and shafts GB/T 1805-2001 Nomenclature of springs GB/T 1805-2021 Spring—Vocabulary GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection GB/T 3279-1989 Hot-rolled spring steel sheets GB/T 3279-2009 Hot-rolled spring steel sheets and plates GB/T 3279-2023 Hot-rolled spring steel plates,sheets and strips GB/T 4340.1-1999 Metallic materials—Vickers hardness test—Part 1:Test method GB/T 4340.1-2009 Metallic materials—Vickers hardness test—Part 1:Test method GB/T 4340.1-2024 Metallic materials—Vickers hardness test—Part 1:Test method GB/T 31214.1-2014 Springs—Shot peening—Part 1:General procedures GB/T 1222-2025 Spring steels

Adopt standards

ISO 19690-2:2018

Related Standards

GB/T 1239.6-1992 Replaced

GB/T 1239.6-1992 Design of helical springs

Publish Date: 1992-11-11

GB/T 13828-1992 Replaced

GB/T 13828-1992 Stranded wire cylindrical helical springs

Publish Date: 1992-11-11

GB/T 1972-1992 Replaced

GB/T 1972-1992 Disc spring

Publish Date: 1992-11-11

GB/T 1358-1993 Replaced

GB/T 1358-1993 Helical spring seriate sizes

Publish Date: 1993-01-30

GB/T 2089-1994 Replaced

GB/T 2089-1994 Cylindrically coiled compression spring—Dimensions and parameters

Publish Date: 1994-12-27

GB/T 2088-1997 Replaced

GB/T 2088-1997 Cylindrically coiled tension spring dimensions and parameters

Publish Date: 1997-07-25