GB/T 4229-1984
Replaced
GB/T 3279-2009
Replaced
National standards
GB/T 3279-2009 Hot-rolled spring steel sheets and plates
GB/T 3279-2009 Hot-rolled spring steel sheets and plates
Basic Information
Standard Code:
GB/T 3279-2009
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
\nSteel plates and steel strips
ICS Name:
Flat steel and semi-finished products
Publish Date:
2009-10-30
Implement Date:
2010-05-01
Pages:
7 pages
Scope
This standard specifies the ordering content, dimensions, shapes, and allowable deviations of hot-rolled spring steel plates, as well as technical requirements, test methods, inspection rules, packaging, marking, and quality certificates.
This standard applies to hot-rolled spring steel plates with a thickness of no more than 15 mm.
Development Information
Replace the following standards
Superseded by the following standards
Referenced Standards
GB/T 222-1984 Method of sampling steel for determination of chemical composition and permissible variations for product analysis
GB/T 222-2006 Permissible tolerances for chemical composition of steel products
GB/T 222-2025 Steels and alloys—Permissible deviations of product analyzed chemical composition
GB/T 223.3-1988 Methods for chemical analysis of iron, steel and alloy—The diantipyryl methane phosphomolybdate gravimetric method for the determination of phosphorus content
GB/T 223.5-1997 Methods for chemical analysis of iron,steel and alloy—The reduced molybdosilicate spectro photometric method for the determination of acid-soluble silicon content
GB/T 223.5-2008 Steel and iron—Determination of acid-soluble silicon and total silicon content—Reduced molybdosilicate spectrophotometric method
GB/T 223.11-1991 Methods for chemical analysis of iron, steel and alloy The ammonium persulfate oxidation volumetric method for the determination of chromium content
GB/T 223.11-2008 Iron,steel and alloy—Determination of chromium content—Visual titration or potentiometric titration method
GB/T 223.11-2025 Iron, steel and alloy—Determination of chromium content—Titrimetric method and spectrophotometric method
GB/T 223.13-2000 Methods for chemical analysis of iron,steel and alloy The ammonium ferrous sulfate titration method for the determination of vanadium content
GB/T 223.13-2025 Iron,steel and alloy—Determination of vanadium content—Titrimetric method and spectrophotometric method
GB/T 223.18-1994 Methods for chemical analysis of iron, steel and alloy The sodium thiosulfate separation iodimetric method for the determination of cupper content
GB/T 223.19-1989 Methods for chemical analysis of iron, steel and alloy The neocuproine-chloroform extraction photometric method for the determination of copper content
GB/T 223.23-1994 Methods for chemical analysis of iron, steel and alloy—The dimethylglyoxime spectrophotometric method for the determination of nickel content
GB/T 223.23-2008 Iron,steel and alloy—Determination of nickel content—The dimethylglyoxime spectrophotometric method
GB/T 223.43-1994 Methods for chemical analysis of iron, steel and alloy—Determination of tungsten content
GB/T 223.43-2008 Iron,steel and alloy—Determination of tungsten content—Gravimetric method and spectrophotometric method
GB/T 223.58-1987 Methods for chemical analysis of iron,steel and alloy--The extraction-absorption catalytic polarographic method for the determination of manganese content
GB/T 223.59-2008 Iron,steel and alloy—Determination of phosphorus content—Bismuth phosphomolybdate blue spectrophotometric method and antimony phosphomolybdate blue spectrophotometric method
GB/T 223.60-1997 Methods for chemical analysis of iron,steel and alloy—The perchloric acid dehydration gravimetric method for the determination of silicon content
GB/T 223.60-2024 Iron,steel and alloy—Determination of silicon content—Gravimetric method
GB/T 223.61-1988 Methods for chemical analysis of iron,steel and alloy—The ammonium phosphomolybdate volumetric method for the determination of phosphorus content
GB/T 223.64-1988 Methods for chemical analysis of iron,steel and alloy—The flame atomic absorption spectrometric method forthe determination of manganese content
GB/T 223.64-2008 Iron,steel and alloy—Determination of manganese content—Flame atomic absorption spectrometric method
GB/T 223.67-1989 Methods for chemical analysis of iron, steel and alloy—The reducing distillation-methylene blue photometric method for the determination of sulfur content
GB/T 223.67-2008 Iron,steel and alloy—Determination of sulfur content—Methylene blue spectrophotometric method
GB/T 223.71-1997 Methods for chemical analysis of iron,steel and alloy—The gravimetric method after combustion in the pipe furnace for the determination of carbon content
GB/T 223.72-1991 Methods for chemical analysis of iron, steel and alloy—The alumina chromatographic separation-barium sulfate gravimetric method for the determination of sulphur content
GB/T 223.72-2008 Iron,steel and alloy—Determination of sulfur content—Gravimetric method
GB/T 223.75-1991 Methods for chemical analysis of iron, steel and alloy—The methanol distillation-curcumin photometric method for the determination of boron content
GB/T 223.75-2008 Iron,steel and alloy—Determination of boron content—Methanol distillation-curcumin photometric method
GB/T 223.76-1994 Methods for chemical analysis iron, steel and alloy—The flame atomic absorption spectrometric method for the determination of vanadium content
GB/T 224-1987 Determination of depth of decarburization of steel
GB/T 224-2008 Determination of depth of decarburization of steels
GB/T 224-2019 Determination of the depth of decarburization of steels
GB/T 226-1991 Etch test for macrostructure and defect of steels
GB/T 226-2015 Test method for macrostructure and defect of steel by etching
GB/T 228-2002 Metallic materials—Tensile testing at ambient temperature
GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature
GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature
GB/T 228.2-2015 Metallic materials—Tensile testing—Part 2:Method of test at elevated temperature
GB/T 228.3-2019 Metallic materials—Tensile testing—Part 3:Method of test at low temperature
GB/T 228.4-2019 Metallic materials—Tensile testing—Part 4:Method of test in liquid helium
GB/T 247-1997 General rule of acceptance, package, mark and certification for steel plates(sheets) and strips
GB/T 247-2008 General rule of package,mark and certification for steel plates(sheets)and strips
GB/T 247-2025 General rules of package, mark and certification for steel plate, sheet and strip
GB/T 709-2006 Dimension,shape,weight and tolerances for hot-rolled steel plates and sheets
GB/T 1222-1984 Spring steel
GB/T 1222-2007 Spring steels
GB/T 1222-2016 Spring steels
GB/T 1222-2025 Spring steels
GB/T 2975-1998 Steel and steel products—Location and preparation of test pieces for mechanical testing
GB/T 2975-2018 Steel and steel products—Location and preparation of samples and test pieces for mechanical testing
GB/T 4336-2002 Standard test method for spark discharge atomic emission spectrometric analysis of carbon and low-Alloy steel(routine method)
GB/T 4336-2016 Carbon and low-alloy steel—Determination of multi-element contents—Spark discharge atomic emission spectrometric method (routine method)
GB/T 13302-1991 Steel—Determination of area content of graphite-micrographic method using diagrams
GB/T 17505-1998 Steel and steel products General technical delivery requirements
GB/T 17505-2016 Steel and steel products—General technical delivery requirements
GB/T 20066-2006 Steel and iron—Sampling and preparation of samples for the determination of chemical composition
Related Standards
GB/T 5212-1985
Active
GB/T 5212-1985 Hot rolled silicon steel sheets for electrical grade
GB/T 5313-1985
Replaced
GB/T 5313-1985 Steel plate with through-thickness characteristics
GB/T 704-1988
Replaced
GB/T 704-1988 Dimensions, shape, weight and tolerances for hot-rolled flats
GB/T 2518-1988
Replaced
GB/T 2518-1988 Continual hot-dip zinc-coated steel sheets and strips
GB/T 3274-1988
Replaced