GB/T 16709-1996
Replaced
GB/T 34346-2017
Active
National standards
GB/T 34346-2017 Guidelines for risk based safety hazard classification of oil and gas pipelines
GB/T 34346-2017 Guidelines for risk based safety hazard classification of oil and gas pipelines
Basic Information
Standard Code:
GB/T 34346-2017
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
-
ICS Name:
Pipe components and pipe systems
Publish Date:
2017-10-14
Implement Date:
2018-05-01
Pages:
35 pages
Scope
This standard specifies the risk-based classification method, process, and technical requirements for safety hazards (hereinafter referred to as "hazards") in oil and gas pipelines, including the identification, evaluation, and treatment of pipeline hazards. The "hazards" in this standard only include compression, insufficient spacing, crossings and parallel alignments (including crossings) that do not meet regulatory requirements, geological disasters, and defects in the pipeline body and ancillary facilities. This standard applies to onshore long-distance crude oil, refined oil, and natural gas pipelines that meet the requirements of GB 50251 or GB 50253. Oil and gas field gathering and transportation pipelines and urban gas pipelines may refer to the relevant provisions of this standard for implementation.
Development Information
Referenced Standards
GB 32167-2015 Oil and gas pipeline integrity management specification
GB/T 19285-2003 Inspection of corrosion protection for buried steel pipelines
GB/T 19285-2014 Inspection of corrosion protection for buried steel pipelines
GB/T 27699-2011 Steel pipeline in-line inspection technical specification
GB/T 27699-2023 Technical specification for in-line inspection of steel pipeline
GB/T 28704-2012 Non-destructive testing—Test method for ultrasonic guided wave testing based on magnetostrictive effects
GB/T 30582-2014 Risk-Based-Inspection and assessment methodology of external damage for buried steel pipelines
GB/T 31211-2014 Non-destructive testing—Ultrasonic guided wave testing—General principle
GB/T 31211.1-2024 Non-destructive testing—Ultrasonic guided-wave testing—Part 1:General principle
GB/T 31211.2-2024 Non-destructive testing—Ultrasonic guided-wave testing—Part 2:Test method based on magnetostrictive transduction
SY/T 6828-2017 Oil and gas pipeline geological hazard risk management technical specification
SY/T 6828-2011 Geological Disaster Risk Management Technical Specification for Oil and Gas Pipelines
NB/T 47013.1-2015 Non-destructive testing of pressure equipment - Part 1: General requirements
NB/T 47013.2-2015 Non-destructive testing of pressure equipment - Part 2: Radiographic testing
NB/T 47013.3-2023 Non-destructive testing of pressure equipment - Part 3: Ultrasonic testing
NB/T 47013.3-2015 Non-destructive testing of pressure equipment - Part 3: Ultrasonic testing
NB/T 47013.4-2015 "Non-destructive testing of pressure equipment - Part 4: Magnetic particle testing"
NB/T 47013.5-2015 Non-destructive testing of pressure equipment - Part 5: Penetrant testing
NB/T 47013.6-2015 Non-destructive testing of pressure equipment - Part 6: Eddy current testing
NB/T 47013.10-2015 Non-destructive testing of pressure equipment - Part 10: Ultrasonic testing using time-of-flight diffraction method
NB/T 47013.11-2023 Non-destructive testing of pressure equipment - Part 11: Digital imaging detection using X-ray technology
NB/T 47013.11-2015 Non-destructive testing of pressure equipment - Part 11: X-ray digital imaging testing
NB/T 47013.12-2015 Non-destructive testing of pressure equipment - Part 12: Magnetic flux leakage testing
NB/T 47013.13-2015 Non-destructive testing of pressure equipment - Part 13: Impulse eddy current testing
NB/T 47013.14-2023 Non-destructive testing of pressure equipment - Part 14: X-ray computer-aided imaging inspection
NB/T 47013.14-2016 Non-destructive testing of pressure equipment - Part 14: X-ray computer-aided imaging detection
NB/T 47013.15-2021 NB/T 47013.15-2021 Nondestructive testing for pressure equipment - Part 15: Phased array ultrasonic testing
NB/T 47013.7-2012 Nondestructive testing of pressure equipments-Part 7:Visual examination
GB 50251-2015 Code for design of gas transmission pipeline engineering
GB 50253-2014 Code for design of oil transportation pipeline engineering
NB/T 47013.8-2012 Nondestructive testing of pressure equipments-Part 8:Leak Testing
NB/T 47013.9-2012 Nondestructive testing of pressure equipments-Part 9:Acoustic emission testing
NB/T 47013.10-2010 Nondestructive testing of pressure equipments-Part 10:Ultrasonic time of flight diffraction technique
NB/T 47013.16-2024 NB/T 47013.16-2024 Nondestructive testing of pressure equipment Part 16: Infrared thermal imaging testing
NB/T 47013.17-2024 NB/T 47013.17-2024 Nondestructive testing for pressure equipment - Part 17: Magnetic-memory testing
NB/T 47013.18-2024 NB/T 47013.18-2024 Nondestructive testing for pressure equipment - Part 18: Array eddy current testing
GB/T 50470-2017 Seismic technical code for oil and gas transmission pipeline engineering
SY/T 6828-2024 Geological Disaster Risk Management Technical Specification for Oil and Gas Pipelines
NB/T 47013.8-2025 Non-destructive testing of pressure equipment - Part 8: Leakage testing
NB/T 47013.21-2025 Non-destructive testing of pressure equipment - Part 21: Detection using alternating electromagnetic fields
GB/T 19285-2026 Inspection of corrosion protection for buried steel pipelines
Related Standards
GB/T 28799.1-2012
Replaced
GB/T 28799.1-2012 Plastics piping systems for hot and cold water installations—Polyethylene of raised temperature resistance(PE-RT)—Part 1:General
GB/T 28799.3-2012
Replaced
GB/T 28799.3-2012 Plastics piping systems for hot and cold water installations—Polyethylene of raised temperature resistance(PE-RT)—Part 3:Fittings
GB/T 34349-2017
Active
GB/T 34349-2017 External inspection methodology for internal corrosion of natural gas pipelines
GB/T 34350-2017
Active
GB/T 34350-2017 External inspection methodology for internal corrosion of liquid petroleum pipelines
GB/T 35067-2018
Active