GB/T 14849.2-1993
Replaced
GB/T 27692-2011
Replaced
National standards
GB/T 27692-2011 Acidity iron pellet for blast furnace
GB/T 27692-2011 Acidity iron pellet for blast furnace
Basic Information
Standard Code:
GB/T 27692-2011
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Iron ore
ICS Name:
Iron ore
Publish Date:
2011-12-30
Implement Date:
2012-10-01
Pages:
8 pages
Scope
This standard specifies the terms and definitions, technical requirements, test methods, inspection rules, packaging, transportation, and quality certificates for acidic iron pellets used in blast furnaces.
This standard applies to acidic iron pellets used in blast furnaces, which are produced from iron ore concentrate or iron ore powder (hereinafter referred to as iron pellets, unless otherwise specified).
Development Information
Superseded by the following standards
Referenced Standards
YB/T 5142
YB/T 5166
GB/T 1361-2008 General rules and regulations for analysis of iron ores
GB/T 1361-2024 General rules and regulations for analysis of iron ores
GB/T 6730.5-1986 Methods for chemical analysis of iron ores The titanium chloride-potassium dichromate volumetric method for the determination of total iron content
GB/T 6730.5-2007 Iron ores—Determination of total iron content—Titanium(Ⅲ)chloride reduction methods
GB/T 6730.5-2022 Iron ores—Determination of total iron content—Titrimetric methods after titanium(Ⅲ) chloride reduction
GB/T 6730.9-1986 Methods for chemical analysis of iron ores The silicomolybdic blue photometric method for the determination of silicon content
GB/T 6730.9-2006 Iron ores—Determination of silicon contents—The silicomolybdic blue spectrophotometric method reduce by ammonium ferrous sulfate
GB/T 6730.9-2016 Iron ores—Determination of silicon content—Silicomolybdic blue spectrophotometric method reduced by ammonium ferrous sulfate
GB/T 6730.11-1986 Methods for chemical analysis of iron ores The fluoride replacement complexometric method for the determination of aluminum content
GB/T 6730.11-2007 Iron ores—Determination of aluminium content—EDTA titrimetric method
GB/T 6730.17-1986 Methods for chemical analysis of iron ores The eombustion iodometric method for the determination of sulfur content
GB/T 6730.17-2014 Iron ores—Determination of sulfur content—Combustion iodometric method
GB/T 6730.18-1986 Methods for chemical analysis of iron ores The n-butyl acetate extraction-molybdenum blue photometric method for the determination of phosphorus content
GB/T 6730.18-2006 Iron ores—Determination of phosphorus content—Molybdenum blue spectrophotometric method
GB/T 6730.62-2005 Iron ores—Determination of calcium,silicon,manganese,titanium,phosphorus magnesium,aluminium and barium content—Wavelength dispersive X-ray fluorescence spectrometric method
GB/T 10322.1-2000 Iron ores—Sampling and sample preparation procedures
GB/T 10322.1-2014 Iron ores—Sampling and sample preparation procedures
GB/T 10322.1-2023 Iron ores—Sampling and sample preparation procedures
GB/T 10322.7-2004 Iron ore—Determination of size distribution by sieving
GB/T 10322.7-2016 Iron ores and direct reduced iron—Determination of size distribution by sieving
GB/T 13240-1991 Iron ore pellets—Determination of relative free-swelling index
GB/T 13240-2018 Iron ore pellets for blast furnace feedstocks—Determination of the free-swelling index
GB/T 13241-1991 Iron ores—Determination of reducibility
GB/T 13241-2017 Iron ores—Determination of reducibility
GB/T 13242-1991 Iron ores—Low-temperature disintegration test—Method using cold tumbling after static reduction
GB/T 13242-2017 Iron ores—Low-temperature disintegration test—Method using cold tumbling after static reduction
GB/T 14201-1993 Iron ore pellets—Determination of crushing strength
GB/T 14201-2018 Iron ore pellets for blast furnace and direct reduction feedstocks—Determination of the crushing strength
GB/T 20565-2006 Iron ores and direct reduced iron—Vocabulary
GB/T 20565-2022 Iron ores and direct reduced iron—Vocabulary
GB/T 6730.11-2025 Iron ores—Determination of aluminium content—EDTA titrimetric method
Related Standards
GB/T 10322.1-2000
Replaced
GB/T 10322.1-2000 Iron ores—Sampling and sample preparation procedures
GB/T 10322.2-2000
Active
GB/T 10322.2-2000 Iron ores—Experimental methods for evaluation of quality variation
GB/T 10322.3-2000
Replaced
GB/T 10322.3-2000 Iron ores—Experimental methods for checking the precision of sampling
GB/T 10322.4-2000
Replaced
GB/T 10322.4-2000 Iron ores—Experimental methods for checking the bias of sampling
GB/T 10322.5-2000
Replaced