GB/T 14849.2-1993
Replaced
GB/T 27692-2024
Active
National standards
GB/T 27692-2024 Iron pellets for blast furnaces
GB/T 27692-2024 Iron pellets for blast furnaces
Basic Information
Standard Code:
GB/T 27692-2024
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Iron ore
ICS Name:
Iron ore
Publish Date:
2024-04-25
Implement Date:
2024-11-01
Pages:
7 pages
Scope
This document specifies the classification and grades, technical requirements, test methods, inspection rules, packaging, transportation, storage, and quality certificates of iron pellets for blast furnaces. This document applies to iron pellets for blast furnaces produced from iron ore concentrates or iron ore powders (referred to as "iron pellets"). This document does not apply to special iron pellets produced from vanadium, titanium, rare earths, chromium, etc.
Development Information
Replace the following standards
Referenced Standards
GB/T 6730.5-1986 Methods for chemical analysis of iron ores The titanium chloride-potassium dichromate volumetric method for the determination of total iron content
GB/T 6730.5-2007 Iron ores—Determination of total iron content—Titanium(Ⅲ)chloride reduction methods
GB/T 6730.5-2022 Iron ores—Determination of total iron content—Titrimetric methods after titanium(Ⅲ) chloride reduction
GB/T 6730.9-1986 Methods for chemical analysis of iron ores The silicomolybdic blue photometric method for the determination of silicon content
GB/T 6730.9-2006 Iron ores—Determination of silicon contents—The silicomolybdic blue spectrophotometric method reduce by ammonium ferrous sulfate
GB/T 6730.9-2016 Iron ores—Determination of silicon content—Silicomolybdic blue spectrophotometric method reduced by ammonium ferrous sulfate
GB/T 6730.10-1986 Methods for chemical analysis of iron ores The gralimetric method for the determination of silicon content
GB/T 6730.10-2014 Iron ores—Determination of silicon content—Gravimetric methods
GB/T 6730.13-1986 Methods for chemical analysis of iron ores The potassium permanganate volumetric method for the determination of calcium content
GB/T 6730.13-2007 Iron ores—Determination of calcium and magnesium content—EGTA-CyDTA titrimetric method
GB/T 6730.13-2025 Iron ores—Determination of calcium and magnesium content—EGTA-CyDTA titrimetric method
GB/T 6730.14-1986 Methods for chemical analysis of iron ores The flame atomic absorption spectrophotometric method for the determination of calcium and magnesium content
GB/T 6730.14-2017 Iron ores—Determination of calcium content—Flame atomic absorption spectrometric method
GB/T 6730.16-1986 Methods for chemical analysis of iron ores The barium sulfate gravimetric method for the determination of sulfur content
GB/T 6730.16-2016 Iron ores—Determination of sulfur content—Barium sulfate gravimetric method
GB/T 6730.17-1986 Methods for chemical analysis of iron ores The eombustion iodometric method for the determination of sulfur content
GB/T 6730.17-2014 Iron ores—Determination of sulfur content—Combustion iodometric method
GB/T 6730.18-1986 Methods for chemical analysis of iron ores The n-butyl acetate extraction-molybdenum blue photometric method for the determination of phosphorus content
GB/T 6730.18-2006 Iron ores—Determination of phosphorus content—Molybdenum blue spectrophotometric method
GB/T 6730.19-1986 Methods for chemical analysis of iron ores The bismuth phosphomolybdate blue photometric method for the determination of phosphorus content
GB/T 6730.19-2016 Iron ores—Determination of phosphorus content—Bismuth phosphomolybdate blue spectrophotometric method
GB/T 6730.20-1986 Methods for the chemical analysis of iron ores The volumetric method for the determination of phosphorus content
GB/T 6730.20-2016 Iron ores—Determination of phosphorus content—Titrimetric method
GB/T 6730.61-2005 Iron ores—Determination of carbon and sulfur content—High frequency combustion with infrared absorption method
GB/T 6730.61-2022 Iron ores—Determination of carbon and sulfur content—High frequency combustion with infrared absorption method
GB/T 6730.62-2005 Iron ores—Determination of calcium,silicon,manganese,titanium,phosphorus magnesium,aluminium and barium content—Wavelength dispersive X-ray fluorescence spectrometric method
GB/T 6730.63-2006 Iron ores—Determination of aluminum,calcium,magnesium,manganese,phosphorus,silicon and titanium content—Inductively coupled plasma atomic emission spectrometric method
GB/T 6730.63-2024 Iron ores—Determination of aluminum,calcium,magnesium,manganese,phosphorus,silicon and titanium content—Inductively coupled plasma atomic emission spectrometric method
GB/T 6730.65-2009 Iron ores—Determination of total iron content—Titanium(Ⅲ) chloride reduction potassium dichromate titration methods(routine methods)
GB/T 6730.66-2009 Iron ores—Determination of total iron content—Automatic potentiometric titration method
GB/T 6730.70-2013 Iron Ores—Determination of total iron content—Titrimetric method after tin(Ⅱ) chloride reduction
GB/T 6730.73-2016 Iron ores—Determination of total iron content—EDTA photometric titration method
GB/T 6730.73-2024 Iron ores—Determination of total iron content—EDTA photometric titration method
GB/T 6730.74-2017 Iron ores—Determination of magnesium content—Flame atomic absorption spectrometric method
GB/T 8170-1987 Rules for rounding off of numberical values
GB/T 8170-2008 Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 10322.1-2000 Iron ores—Sampling and sample preparation procedures
GB/T 10322.1-2014 Iron ores—Sampling and sample preparation procedures
GB/T 10322.1-2023 Iron ores—Sampling and sample preparation procedures
GB/T 10322.7-2004 Iron ore—Determination of size distribution by sieving
GB/T 10322.7-2016 Iron ores and direct reduced iron—Determination of size distribution by sieving
GB/T 13240-1991 Iron ore pellets—Determination of relative free-swelling index
GB/T 13240-2018 Iron ore pellets for blast furnace feedstocks—Determination of the free-swelling index
GB/T 13241-1991 Iron ores—Determination of reducibility
GB/T 13241-2017 Iron ores—Determination of reducibility
GB/T 13242-1991 Iron ores—Low-temperature disintegration test—Method using cold tumbling after static reduction
GB/T 13242-2017 Iron ores—Low-temperature disintegration test—Method using cold tumbling after static reduction
GB/T 14201-1993 Iron ore pellets—Determination of crushing strength
GB/T 14201-2018 Iron ore pellets for blast furnace and direct reduction feedstocks—Determination of the crushing strength
GB/T 20565-2006 Iron ores and direct reduced iron—Vocabulary
GB/T 20565-2022 Iron ores and direct reduced iron—Vocabulary
GB/T 24531-2009 Iron ores for blast furnace and direct reduction feedstocks—Determination of the tumble and abrasion indices
YB/T 5142
Related Standards
GB/T 10322.1-2000
Replaced
GB/T 10322.1-2000 Iron ores—Sampling and sample preparation procedures
GB/T 10322.2-2000
Active
GB/T 10322.2-2000 Iron ores—Experimental methods for evaluation of quality variation
GB/T 10322.3-2000
Replaced
GB/T 10322.3-2000 Iron ores—Experimental methods for checking the precision of sampling
GB/T 10322.4-2000
Replaced
GB/T 10322.4-2000 Iron ores—Experimental methods for checking the bias of sampling
GB/T 10322.5-2000
Replaced