GB/T 17213.1-1998
Replaced
GB/T 12228-2006
Replaced
National standards
GB/T 12228-2006 General purpose industrial valves—Specification of carbon steel forgings
GB/T 12228-2006 General purpose industrial valves—Specification of carbon steel forgings
Basic Information
Standard Code:
GB/T 12228-2006
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
\nValve
ICS Name:
\nValve Comprehensive
Publish Date:
2006-12-25
Implement Date:
2007-05-01
Pages:
8 pages
Scope
This standard specifies the requirements, test methods, inspection rules, ordering requirements, marking, and quality certification for pressure-bearing carbon steel forgings such as general valves, flanges, and pipe fittings.
This standard applies to pressure-bearing carbon steel forgings such as general valves, flanges, and pipe fittings (hereinafter referred to as forgings). Non-pressure-bearing forgings may be implemented as a reference.
Development Information
Replace the following standards
Superseded by the following standards
Referenced Standards
GB 150
JB 4726
ASTM A105/A105M:2003
GB/T 228-2002 Metallic materials—Tensile testing at ambient temperature
GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature
GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature
GB/T 228.2-2015 Metallic materials—Tensile testing—Part 2:Method of test at elevated temperature
GB/T 228.3-2019 Metallic materials—Tensile testing—Part 3:Method of test at low temperature
GB/T 228.4-2019 Metallic materials—Tensile testing—Part 4:Method of test in liquid helium
GB/T 229-1994 Metallic materials—Charpy notch impact test
GB/T 229-2007 Metallic materials—Charpy pendulum impact test method
GB/T 229-2020 Metallic materials—Charpy pendulum impact test method
GB/T 231.1-2002 Metallic materials—Brinell hardness test—Part 1:Test method
GB/T 231.1-2009 Metallic materials—Brinell hardness test—Part 1:Test method
GB/T 231.1-2018 Metallic materials—Brinell hardness test—Part 1:Test method
GB/T 699-1999 Quality carbon structural steels
GB/T 699-2015 Quality carbon structure steels
GB/T 2975-1998 Steel and steel products—Location and preparation of test pieces for mechanical testing
GB/T 2975-2018 Steel and steel products—Location and preparation of samples and test pieces for mechanical testing
GB/T 13927-1992 Pressure testing for general purpose valves
GB/T 13927-2008 Industrial valves—Pressure testing
GB/T 13927-2022 Industrial valves—Pressure testing
JB/T 4730.3-2005 Nondestructive testing of pressure equipments—Part 3:Ultrasonic testing
JB/T 4730.4-2005 Nondestructive testing of pressure equipments—Part 4:Magnetic particle testing
JB/T 4730.5-2005 Nondestructive testing of pressure equipments—Part 5:Penetrant testing
JB/T 4730.6-2005 Nondestructive testing of pressure equipments—Part 6:Eddy current testing
Related Standards
GB/T 17213.5-1998
Replaced
GB/T 17213.5-1998 Industrial-process control valves—Part 5:Marking
GB/T 17213.7-1998
Replaced
GB/T 17213.7-1998 Industrial-process control valves—Part 7:Control valve data sheet
GB/T 17213.8-1998
Replaced
GB/T 17213.8-1998 Industrial-process control valves—Part 8:Noise considerations Section 1:Laboratory measurement of noise generated by aerodynamic flow through control valves
GB/T 12222-2005
Replaced
GB/T 12222-2005 Multi-turn valve actuator attachments
GB/T 12223-2005
Replaced