GB 4962-1985
Replaced
GB/T 23938-2009
Replaced
National standards
GB/T 23938-2009 High purity carbon dioxide
GB/T 23938-2009 High purity carbon dioxide
Basic Information
Standard Code:
GB/T 23938-2009
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Industrial gases and chemical gases
ICS Name:
Industrial gases
Publish Date:
2009-06-02
Implement Date:
2010-02-01
Pages:
8 pages
Scope
This standard specifies the requirements, test methods, and packaging, marking, storage, transportation, and safety warnings for high-purity carbon dioxide.
This standard applies to high-purity carbon dioxide obtained by purifying industrial carbon dioxide as a raw material. High-purity carbon dioxide is mainly used in laser, electronics, reactor gas coolants, scientific research, and other fields.
Molecular formula: CO2
Molecular weight: 44.0095 (calculated according to the 2007 International Atomic Weight Table)
Development Information
Superseded by the following standards
Referenced Standards
气瓶安全监察规程
特种设备安全监察条例
危险化学品安全管理条例
危险货物运输管理规则
GB 190-1990 Labels for packages of dangerous goods
GB 190-2009 Packing symbol of dangerous goods
GB/T 3723-1999 Sampling of chemical products for industrial use—Safety in sampling
GB/T 5099-1994 Seamless steel gas cylinders
GB/T 5099.1-2017 Seamless steel gas cylinders—Part 1:Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa
GB/T 5099.3-2017 Seamless steel gas cylinders—Part 3:Normalized cylinders
GB/T 5099.4-2017 Seamless steel gas cylinders—Part 4:Seamless stainless steel gas cylinders
GB/T 5832.1-2003 Determination of moisture in gases—Part 1:Electrolytic method
GB/T 5832.1-2016 Gas analysis—Determination of moisture—Part 1:Electrolytic method
GB/T 5832.2-1986 Determination of trace water in the gases—Dew point method
GB/T 5832.2-2008 Determination of moisture in gases—Part 2:Dew point method
GB/T 5832.2-2016 Gas analysis—Determination of moisture—Part 2:Dew point method
GB/T 6285-2003 Determination of trace oxygen in gases—Eletrochemical method
GB/T 6285-2016 Determination of trace oxygen in gases—Electrochemical method
GB 7144-1999 Colored cylinder mark for gases
GB/T 7144-2016 Coloured cylinder mark for gases
GB/T 8981-1988 Determination of trace hydrogen in gases—Gas chromatographic method
GB/T 8981-2008 Determination of trace hydrogen in gases—Gas chromatographic method
GB/T 8984-2008 Determination of carbon monoxide,carbon dioxide and hydrocarbon in gases—Gas chromatographic method
GB/T 8984.1-1997 Determination of carbon monoxide,carbon dioxide and hydrocarbon in the gases—Part 1:Determination of carbon monoxide,carbon dioxide and mathane in the gases—Gas chromatographic method
GB/T 8984.2-1997 Determination of carbon monoxide,carbon dioxide and hydrocarbon in the gases—Part 2:Determination of total content of carbon monoxide,carbon dioxide and hydrocarbon in gases—Gas chromatographic method
GB/T 8984.3-1997 Determination of carbon monoxide,carbon dioxide and hydrocarbon in the gases—Part 3:Determination of total hydrocarbon in gases—Flame ionization method
GB/T 11640-2001 Seamless aluminium alloy gas cylinder
GB/T 11640-2011 Seamless aluminum alloy gas cylinders
GB/T 11640-2021 Seamless aluminium alloy gas cylinders
GB 14193-1993 Rules for filling of liquefied gas cylinders
GB/T 14193-2009 Rules for filling of liquefied gas cylinders
GB 15258-1999 General rules for preparation of precautionary label for industrial chemicals
GB 15258-2009 General rules for preparation of precautionary label for chemicals
GB 16483-2000 General rules for preparation of chemical safety data sheet
GB/T 16483-2008 Safety data sheet for chemical products—Content and order of sections
GB/T 14193.1-2025 Rules for the filling of liquefied gas cylinders—Part1:Industrial gas cylinder
GB/T 8984-2025 Gas analysis—Determination of the contents of trace carbon monoxide, carbon dioxide and hydrocarbon in gases—Gas chromatography with flame ionization detector
Related Standards
GB/T 8981-1988
Replaced
GB/T 8981-1988 Determination of trace hydrogen in gases—Gas chromatographic method
GB/T 10627-1989
Replaced
GB/T 10627-1989 Gas analysis—Preparation of calibration gas mixtures—Static volumetric methods
GB/T 10628-1989
Replaced
GB/T 10628-1989 Gas analysis—Determination of composition of calibration gas mixtures—Comparison methods
GB 13548-1992
Replaced
GB 13548-1992 General principle of safety assessment for phosgene and its products plant
GB 13591-1992
Replaced