GB/T 30788-2014
Active
National standards
GB/T 30788-2014 Specification of cold-applied petrolatum tape coatings for steel pipelines
GB/T 30788-2014 Specification of cold-applied petrolatum tape coatings for steel pipelines
Basic Information
Standard Code:
GB/T 30788-2014
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Material protection
ICS Name:
Other processing and plating
Publish Date:
2014-07-08
Implement Date:
2014-12-01
Pages:
10 pages
Scope
This standard specifies the material requirements, design, construction, and acceptance for the application of anti-corrosion cold-wrapped grease tape on the outer surfaces of steel pipes and fittings (such as flanges, valves, tees, cross tees, etc.) for anti-corrosion protection.
This standard applies to the application of anti-corrosion cold-wrapped grease tape for the external anti-corrosion layer of steel pipes and fittings in atmospheric environments (including humid environments). Other steel structures suitable for the use of cold-wrapped grease tape for external anti-corrosion protection may also refer to this standard for implementation.
Development Information
Referenced Standards
SY/T 0415-1996
GB/T 1037-1988 Test method for water vapor transmission of plastic film and sheet—Cup method
GB/T 1037-2021 Test method for water vapor transmission of plastic film and sheet—Desiccant method and water method
GB/T 1040.2-2006 Plastics—Determination of tensile properties—Part 2:Test conditions for moulding and extrusion plastics
GB/T 1040.2-2022 Plastics—Determination of tensile properties—Part 2:Test conditions for moulding and extrusion plastics
GB/T 1408.1-1999 Methods of test for electric strength of solid insulating materials-Tests at power frequencies
GB/T 1408.1-2006 Electrical strength of insulating materials—Test methods—Part 1:Tests at power frequencies
GB/T 1408.1-2016 Insulating materials—Test methods for electric strength—Part 1:Test at power frequencies
GB/T 3536-1983 Petroleum products—Determination of flash and fire points—Cleveland open cup method
GB/T 3536-2008 Petroleum products—Determination of flash and fire points—Cleveland open cup method
GB/T 3820-1997 Determination of thickness of textiles and textile products
GB/T 6343-1995 Cellular plastics and rubbers—Determination of apparent (bulk) density
GB/T 6343-2009 Cellular plastics and rubbers—Determination of apparent density
GB/T 8026-1987 Petroleum waxes and petrolatums—Determination of drop melting point
GB/T 8026-2014 Standard test method for drop melting point of petroleum wax,including petrolatum
GB/T 8026-2023 Test method for drop melting point of petroleum wax,including petrolatum
GB 8624-1997 Classification on burning behaviors for building materials
GB 8624-2006 Classification for burning behavior of building materials and products
GB 8624-2012 Classification for burning behavior of building materials and products
GB/T 8923.1-2011 Preparation of steel substrates before application of paints and related products—Visual assessment of surface cleanliness—Part 1:Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings
GB/T 10125-1997 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 10125-2012 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 10125-2021 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 13377-1992 Crude petroleum and liquid or solid petroleum products—Determination of density or relative density—Capillary stoppered pyknometer and graduated bicapillary pyknometer method
GB/T 13377-2010 Crude petroleum and liquid or solid petroleum products-Determination of density or relative density-Capillary stoppered pyknometer and graduated bicapillary pyknometer methods
SY/T 0315-2005 The technical specifications for a single-layer molten weld epoxy coating applied to steel pipes
GB 8624-2025 Classification for burning behavior of building materials and products
Related Standards
GB/T 17457-1998
Replaced
GB/T 17458-1998
Abolished
GB/T 17458-1998 Ductile iron pipes—Centrifugal cement mortar lining—Composition controls of freshly applied mortar
JG/T 133-2000
Abolished
JG/T 133-2000 Fluorocarbon coatings on architectural aluminum extrusions and panels
GB/T 17457-2009
Replaced
GB/T 17457-2009 Ductile iron pipes and fittings—Cement mortar lining
GA 923-2011
Active
GA 923-2011 Specification of special police vehicle unified appearance coating
GB/T 26825-2011
Active