GB/T 10060-2011 Replaced National standards

GB/T 10060-2011 Code for acceptance of electric lifts installation

GB/T 10060-2011 Code for acceptance of electric lifts installation

Publish Date: 2011-07-20 Implement Date: 2012-01-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 10060-2011
Standard Type: National standards
Standard Status: Replaced
is_force_gb: no
CCS Name: Elevator
ICS Name: Elevators, escalators
Publish Date: 2011-07-20
Implement Date: 2012-01-01
Pages: 30 pages

Scope

This standard specifies the conditions, items, requirements, and rules for the installation and acceptance of elevators.
This standard applies to power-driven traction elevators with a rated speed of no more than 6.0 m/s and power-driven forced passenger elevators and freight elevators with a rated speed of no more than 0.63 m/s. For power-driven traction passenger elevators and freight elevators with a rated speed of more than 6.0 m/s, this standard can be referenced, and the parts that are not applicable shall be determined by the manufacturer and the customer through consultation. Elevators for special purposes, such as fire elevators and elevators suitable for disabled persons, shall adjust the acceptance content in accordance with the corresponding product standards.
This standard does not apply to hydraulic elevators, freight elevators, freight-only elevators, and household elevators.

Development Information

Word Count: 55 Thousand words Pages: 30 pages

Replace the following standards

Superseded by the following standards

Referenced Standards

GB/T 7024-2008 Terminology of lifts,escalators,passenger conveyors GB 7588-2003 Safety rules for the construction and installation of electric lifts GB/T 10058-2009 Specification for electric lifts GB/T 10059-2009 Electric lifts—Testing methods GB/T 23821-2009 Safety of machinery—Safety distances to prevent hazard zones being reached by upper and lower limbs JG/T 5072.3-1996 Hollow guide rails for elevator's counterweight GB 4208-1993 Degrees of protection provided by enclosure (IP code) GB/T 4208-2008 Degrees of protection provided by enclosure(IP code) GB/T 4208-2017 Degrees of protection provided by enclosure(IP code) GB/T 5974.1-1986 General purpose thimbles for use with steel wire ropes GB/T 5974.1-2006 General purpose thimbles for use with steel wire ropes GB/T 5974.2-1986 Heavy thimbles for use with steel wire ropes GB/T 5974.2-2006 Heavy thimbles for use with steel wire ropes GB/T 5976-1986 Wire rope grips GB/T 5976-2006 Wire rope grips GB 14048.4-2003 Low-voltage switchgear and controlgear—Electromechanical contactors and motor-starters GB/T 14048.4-2010 Low-voltage switchgear and controlgear—Part 4-1:Contactors and motor-starters—Electromechanical contactors and motor-starters(Including motor protector) GB/T 14048.4-2020 Low-voltage switchgear and controlgear—Part 4-1:Contactors and motor-starters—Electromechanical contactors and motor-starters(Including motor protector) GB 16895.3-1997 Electrical installations of buildings Part 5:Selection and erection of electrical equipment Chapter 54:Earthing arrangements and protective conductors GB/T 16895.3-2004 Electrical installations of buildings—Part 5-54:Selection and erection of electrical equipment-Earthing arrangements, protective conductors and protective bonding conductors GB/T 16895.3-2017 Low-voltage electrical installations—Part 5-54:Selection and erection of electrical equipment—Earthing arrangements and protective conductors GB/T 22562-2008 Guide rails for lifts—T-type GB/T 16895.3-2024 Low-voltage electrical installations—Part 5-54:Selection and erection of electrical equipment—Earthing arrangements and protective conductors

Related Standards

Contact Us