GB/T 23506-2025
Active
National standards
GB/T 23506-2025 The gas-fuel power set for oil pruduction drilling site
GB/T 23506-2025 The gas-fuel power set for oil pruduction drilling site
Basic Information
Standard Code:
GB/T 23506-2025
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Oil drilling and extraction equipment and instruments
ICS Name:
Exploration and drilling equipment
Publish Date:
2025-03-28
Implement Date:
2025-10-01
Pages:
20 pages
Scope
This document specifies the model designation method, requirements, testing, inspection rules, marking, packaging, transportation, and storage for gas power units used in oil extraction well sites.
This document applies to the design, manufacture, inspection, and acceptance of gas power units (hereinafter referred to as "units") used in oil extraction well sites. Gas power units used to drive other equipment and power units driven by other fuel engines shall refer to and implement this document accordingly.
Note: The units are mainly used to drive pumping units, crude oil pumping pumps, compressors, and lifting machinery for operations (such as workover rigs) in onshore oil extraction well sites.
Development Information
Replace the following standards
Referenced Standards
GB/T 191-2000 Packaging—Pictorial marking for handling of goods
GB/T 191-2008 Packaging—Pictorial marking for handling of goods
GB 1589-2004 Limits of dimensions, axle load and masses for road vehicles
GB 1589-2016 Limits of dimensions,axle load and masses for motor vehicles,trailers and combination vehicles
GB/T 4556-2001 Reciprocating internal combustion engines—Fire protection
GB/T 6072.1-2000 Reciprocating internal combustion engines—Performance—Part 1:Standard reference conditions,declarations of power,fuel and lubricating oil consumptions,and test methods
GB/T 6072.1-2008 Reciprocating internal combustion engines—Performance—Part 1:Declarations of power,fuel and lubricating oil consumptions and test methods—Additional requirements for engines for general use
GB/T 6072.3-2003 Reciprocating internal combustion engines—Performance—Part 3:Test measurements
GB/T 6072.3-2008 Reciprocating internal combustion engines—Performance—Part3:Test measurements
GB/T 6072.5-2003 Reciprocating internal combustion engines—Performance—Part 5:Torsional vibrations
GB/T 6388-1986 Transport package shipping mark
GB/T 7184-1987 Measurement method of vibration for small and medium power diesel engines
GB/T 7184-2008 Small and medium power diesel engines—Measurement and evaluation of vibration
GB/T 7184-2023 Reciprocating internal combustion engines—Evaluation method of vibration
GB 11122-1997 Diesel engine oils
GB 11122-2006 Diesel engine oils
GB/T 14097-1999 Noise limits for small and medium power diesel engines
GB/T 14097-2018 Reciprocating internal combustion engines—Limit values of emitted noise
GB/T 14097-2023 Reciprocating internal combustion engines—Limit values of emitted noise
GB/T 14363-1993 Measurement of lubricant oil consumption for diesel engines
GB/T 14363-2009 Measure method of lubricating oil consumption for diesel engines
GB/T 16471-1996 Dimensional constraints for transport package
GB/T 16471-2008 Dimensional and weight constraints for transport package
GB/T 19147-2003 Automobile diesel fuels
GB 19147-2009 Automobile diesel fuels
GB 19147-2013f Automobile diesel fuels(Ⅳ)
GB 19147-2013 Automobile diesel fuels(Ⅴ)
GB 19147-2016 Automobile diesel fuels
GB/T 20136-2006 General method of test for electric power plant with internal combustion engines
GB/T 20651.2-2014 Reciprocating internal combustion engines—Safety—Part 2:Spark ignition engines
GB 20891
GB/T 21404-2008 Internal combustion engine—Determination and method for the measurement of engine power—General requirements
GB/T 21404-2022 Internal combustion engines—Determination and method for the measurement of engine power—General requirements
GB/T 23821-2009 Safety of machinery—Safety distances to prevent hazard zones being reached by upper and lower limbs
GB/T 23821-2022 Safety of machinery—Safety distances to prevent hazard zones being reached by upper and lower limbs
NB/T 10301-2019 Reciprocating Internal Combustion Gas Engine Heat Balance Test Method
GB/T 4556-2025 Reciprocating internal combustion engines—Fire protection
GB 11122-2025 Diesel engine oils
GB/T 191-2025 Graphical symbols marking for handling and storage of packages
Related Standards
GB/T 9253.9-1995
Abolished
GB/T 9253.8-1995
Abolished
GB/T 9253.8-1995 Drill pipe threads
GB/T 16750.1-1997
Replaced
GB/T 16750.1-1997 The types, general parameters and conjunction sizes of electrical submersible pumping equipment
GB/T 16750.2-1997
Replaced
GB/T 16750.2-1997 Electrical submersible pump—Technical specifications
GB/T 16750.3-1997
Replaced
GB/T 16750.3-1997 The test method for electrical submersible pump units
GB/T 17386-1998
Replaced