GB 3883.10-1991
Replaced
GB/T 22675-2008
Active
National standards
GB/T 22675-2008 Orbital sanders and random orbital sanders
GB/T 22675-2008 Orbital sanders and random orbital sanders
Basic Information
Standard Code:
GB/T 22675-2008
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Electric tools
ICS Name:
Electric tools
Publish Date:
2008-12-31
Implement Date:
2009-10-01
Pages:
11 pages
Scope
This standard specifies the basic parameters, types, technical requirements, test methods, and inspection rules for swing-type flat sanding machines.
This standard applies to swing-type flat sanding machines (hereinafter referred to as sanding machines) that operate under general environmental conditions. The machines are driven by DC, AC/DC dual-use, or single-phase shunt-wound motors to convert rotary motion into swinging motion. The machines are equipped with sandpaper (or sand cloth) made of corundum or other abrasives on a flat plate to sand surfaces of wood, metal, and other materials.
This standard does not apply to swing-type flat sanding machines driven by single-phase asynchronous squirrel-cage motors.
Development Information
Referenced Standards
GB/T 755-2008 Rotating electrical machines—Rating and performance
GB 3883.1-2005 Safety of hand-held motor-operated electric tools—Part 1:General requirements
GB 3883.4-2005 Safety of hand-held motor-operated electric tools—Part 2:Particular requirements for sanders and polishers other than disk type
GB 4343.1-2003 Electromagnetic compatibility—Requirements for household appliances, electric tools and similar apparatus—Part 1:Emission
GB/T 4583-2007 Measurement of noise emitted by electric tools—Engineering method
GB/T 5013.4-2008 Rubber insulated cables of rated voltages up to and including 450/750 V—Part 4:Cords and flexible cables
GB/T 5023.5-2008 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V—Part 5:Flexible cables (cords)
GB/T 9088-2008 Organization method for electric tools
GB 17625.1-2003 Electromagnetic compatibility—limits—Limits—for harmonic current emissions(equipment input current≤16A per phase
GB/T 17625.2-2007 Electromagnetic compatibility (EMC)—Limits—Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection
GB 19212.1-2008 Safety of power transformers,power supplies,reactors and similar products—Part 1:General requirements and tests
GB 19212.7-2006 Safety of power transformers, power supply units and similar—Part 7:Particular requirements for safety isolating transformers for general use
GB 1002-1996 Single phase plugs and socket-outlets for household and similar purposes Types、basic parameters and dimensions
GB/T 1002-2008 Single phase plugs and socket-outlets for household and similar purposes—Types,basic parameters and dimensions
GB/T 1002-2021 Single phase plugs and socket-outlets for household and similar purposes—Types,basic parameters and dimensions
GB 1002-2024 Single phase plugs and socket-outlets for household and similar purposes—Types,basic parameters and dimensions
GB 2099.1-1996 Plugs and socket-outlets for household and similar purposes Part 1:General requirements
GB/T 2099.1-2008 Plugs and socket-outlets for household and similar purposes—Part 1:General requirements
GB/T 2099.1-2021 Plugs and socket-outlets for household and similar purposes—Part 1:General requirements
Related Standards
GB 3883.12-1991
Replaced
GB 3883.12-1991 Safety of hand-held motor-operated electric tools—Part 2:Particular requirements for concrete vibrators (internal vibrators)
GB 3883.3-1991
Replaced
GB 3883.3-1991 Safety of hand-held motor-operated electric tools Part 2:Particular requirements for electric grinders, polishers and disk-type sanders
GB 3883.6-1991
Replaced
GB 3883.6-1991 Safety of hand-held motor-operated electric tools—Part 2:Particular requirements for electric drills
GB 13960-1992
Replaced
GB 13960-1992 Safety of transportable motor-operated electric tools—Part 1:General requirements
GB/T 13956-1992
Abolished