GB/T 29045-2012 Replaced National standards

GB/T 29045-2012 Thin prefabricated hot water radiant heating board

Publish Date: 2012-12-31 Implement Date: 2013-09-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 29045-2012

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Heating and heating engineering

ICS Name: The comprehensive facilities in the building

Publish Date: 2012-12-31

Implement Date: 2013-09-01

Pages: 28 pages

Scope

This standard specifies the terms and definitions, classification and models, materials, requirements, test methods, inspection rules, and marking, packaging, transportation, and storage for prefabricated thin-type hot water radiant heating panels (hereinafter referred to as heating panels).
This standard applies to heating panels installed on the floors, walls, and ceilings of buildings; their thickness shall not exceed 13 mm, the heat medium temperature shall not exceed 60 °C, and the working pressure shall not exceed 0.6 MPa.

Development Information

Word Count: 44 Thousand words Pages: 28 pages

Superseded by the following standards

GB/T 29045-2025 Prefabricated thin hot water radiant heating board

Referenced Standards

GB/T 8013.3-2007 Anodic oxide coatings and organic polymer coatings on aluminium and its alloys—Part 3:Organic polymer coatings GB/T 10801.1-2002 Moulded polystyrene foam board for thermal insulation GB/T 1220-1992 Stainless steel bars GB/T 1220-2007 Stainless steel bars GB/T 2792-1998 Test method for peel strength of pressure-sensitive tape at 180°angle GB/T 2792-2014 Measurement of peel adhesion properties for adhesive tapes GB/T 6342-1996 Cellular plastics and rubbers—Determination of linear dimensions GB/T 8813-2008 Rigid cellular plastics—Determination of compression properties GB/T 8813-2020 Rigid cellular plastics—Determination of compression properties GB/T 10798-2001 Table of universal wall thickness of thermoplastics pipe GB/T 13808-1992 Wrought copper and copper alloys—Extruded rods and bars GB/T 18102-2000 Laminate floor covering GB/T 18102-2007 Laminate flooring GB/T 18102-2020 Laminate floor coverings GB 18583-2001 Indoor decorating and refurbishing materials—Limit of harmful substances of adhesives GB 18583-2008 Indoor decorating and refurbishing materials—Limit of harmful substances of adhesives GB/T 18992.2-2003 Crosslinked polyethylene(PE-X) piping systems for hot and cold water installations—Part 2:Pipes GB/T 19473.2-2004 Polybutylene(PB) piping systems for hot and cold water installations—Part 2:Pipes GB/T 19473.2-2020 Polybutene (PB) piping systems for hot and cold water installations—Part 2:Pipes CJ/T 175-2002 Polyethylene of raised temperature resistance(PE-RT)piping systems for hot and cold water installations

Related Standards

GB/T 16662-1996 Replaced

GB/T 16662-1996 Terms of equipments and materials for building water supply and drainage

Publish Date: 1996-12-19

GB/T 16803-1997 Replaced

GB/T 16803-1997 Equipment of heating, ventilating,air conditioning and air cleaning terminology

Publish Date: 1997-05-28

GB 16895.2-1997 Replaced

GB 16895.2-1997 Electrical installations of buildings—Part 4:Protection for safety Chapter 42:Protection against thermal effects

Publish Date: 1997-06-28

JG/T 195-2007 Abolished

JG/T 195-2007 Thermostatic radiator valve

Publish Date: 2007-01-11

CJ/T 246-2007 Replaced

CJ/T 246-2007 Technical specification of preformed directly buried steam insulating pipeline accessories for municipal heat-supply

Publish Date: 2007-04-09

GB/T 16662-2008 Active

GB/T 16662-2008 Terms of equipments and materials for building water supply and drainage

Publish Date: 2008-09-18