CJ/T 246-2007
Replaced
Industry standards-Urban construction
CJ/T 246-2007 Technical specification of preformed directly buried steam insulating pipeline accessories for municipal heat-supply
CJ/T 246-2007 Technical specification of preformed directly buried steam insulating pipeline accessories for municipal heat-supply
Basic Information
Standard Code:
CJ/T 246-2007
Standard Type:
Industry standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Heating and heating engineering
ICS Name:
The comprehensive facilities in the building
Publish Date:
2007-04-09
Implement Date:
2007-11-01
Pages:
16 pages
Scope
This standard specifies the terms and definitions, basic components, requirements, test methods, inspection rules, and markings for pipeline accessories of prefabricated direct-buried steam insulation pipes for urban heating (hereinafter referred to as pipeline accessories). It also covers their transportation and storage.
This standard applies to the manufacture and inspection of pipeline accessories used to transport steam with a temperature not exceeding 350℃ and a working pressure not exceeding 1.6 MPa. The manufacture and inspection of pipeline accessories used to transport hot water with a temperature not less than 150℃ and a working pressure not exceeding 2.5 MPa may be carried out in accordance with this standard.
Development Information
Superseded by the following standards
Referenced Standards
GB/T 8923-1988
GB/T 12459-2005 Steel butt-welding seamless pipe fittings
GB 50235-1997
CJJ/T 81-1998
CJ/T 155-2001 Preformed directly buried insulating fittings with polyurethane[PUR]foamed-plastics and high density polyethylene[PE]casing pipes
CJ/T 200-2004 Preformed directly buried steam insulating pipes technical-specification for heating in city
CJJ 104-2005
CJ/T 3016
GB/T 2829-2002 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability)
GB/T 3323-1987 Methods for radiographic inspection and classification of radiographs for fusion welded butt joints in steel
GB/T 3323-2005 Radiographic examination of fusion welded joints in metallic materials
GB/T 3323.1-2019 Non-destructive testing of welds—Radiographic testing—Part 1:X-and gamma-ray techniques with film
GB/T 3323.2-2019 Non-destructive testing of welds—Radiographic testing—Part 2:X-and gamma-ray techniques with digital detectors
GB/T 13401-1992 Steel plate butt-welding pipe fittings
GB/T 13401-2005 Steel plate butt-welding pipe fittings
GB/T 13401-2017 Steel buttwelding pipe fittings—Technical specification
GB/T 17393-1998 Standard specification of thermal insulation materials for use over austenitic stainless steel
GB/T 17393-2008 Specification for thermal insulation for use in contact with austenitic stainless steel
JB/T 1611-1993 Boiler tube specification (Technical conditions)
JC/T 618-2019 Chemical analysis methods for solutes such as chloride, fluoride, silicate, and sodium in insulation materials
SY 0063-1992 Pipeline corrosion prevention layer leak testing method
JC/T 618-2005 Chemical analysis methods for solutes containing chloride, fluoride, silicate, and sodium in thermal insulation materials
CJ/T 3016.2-1994 CJ/T 3016.2-1994 Urban Heating Compensator Welding Thickness Expansion Joint。
JB/T 4730.3-2005 Nondestructive testing of pressure equipments—Part 3:Ultrasonic testing
CJJ 28-2014 Code for construction and acceptance of city heating pipelines
GB/T 13401-2025 Steel buttwelding piping fittings—Technical specification
GB/T 2829-2025 Sampling procedures and tables for periodic inspection by attributes(Apply to inspection of process stability)
Related Standards
GB/T 16662-1996
Replaced
GB/T 16803-1997
Replaced
GB/T 16803-1997 Equipment of heating, ventilating,air conditioning and air cleaning terminology
GB 16895.2-1997
Replaced
GB 16895.2-1997 Electrical installations of buildings—Part 4:Protection for safety Chapter 42:Protection against thermal effects
JG/T 195-2007
Abolished
JG/T 195-2007 Thermostatic radiator valve
GB/T 16662-2008
Active
GB/T 16662-2008 Terms of equipments and materials for building water supply and drainage
GB/T 24603-2009
Replaced