GB/T 29045-2025
Active
National standards
GB/T 29045-2025 Prefabricated thin hot water radiant heating board
GB/T 29045-2025 Prefabricated thin hot water radiant heating board
Basic Information
Standard Code:
GB/T 29045-2025
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Ventilation and air conditioning projects
ICS Name:
Ventilation and air conditioning
Publish Date:
2025-01-24
Implement Date:
2025-08-01
Pages:
24 pages
Scope
This document specifies the classification and marking of prefabricated thin-type hot water radiant heating panels, general requirements, test methods, inspection rules, marking, packaging, transportation and storage, etc.
This document is applicable to the production and inspection of prefabricated thin-type hot water radiant heating panels, which are factory-made and installed on building floors, walls, or ceilings. The panels have a surface layer and a thickness of no more than 35 mm, or no surface layer and a thickness of no more than 20 mm. The hot water supply temperature should not exceed 60 °C, and the working pressure should not exceed 0.6 MPa.
Development Information
Replace the following standards
Referenced Standards
GB/T 2792-1998 Test method for peel strength of pressure-sensitive tape at 180°angle
GB/T 2792-2014 Measurement of peel adhesion properties for adhesive tapes
GB/T 6342-1996 Cellular plastics and rubbers—Determination of linear dimensions
GB/T 8013.3-2007 Anodic oxide coatings and organic polymer coatings on aluminium and its alloys—Part 3:Organic polymer coatings
GB/T 8013.3-2018 Anodic oxide coatings and organic polymer coatings on aluminium and its alloys—Part 3:Organic polymer coatings
GB 8624-1997 Classification on burning behaviors for building materials
GB 8624-2006 Classification for burning behavior of building materials and products
GB 8624-2012 Classification for burning behavior of building materials and products
GB/T 8813-2008 Rigid cellular plastics—Determination of compression properties
GB/T 8813-2020 Rigid cellular plastics—Determination of compression properties
GB/T 10798-2001 Table of universal wall thickness of thermoplastics pipe
GB/T 10801.1-2002 Moulded polystyrene foam board for thermal insulation
GB/T 10801.1-2021 Moulded polystyrene foam for thermal insulation(EPS)
GB/T 18102-2000 Laminate floor covering
GB/T 18102-2007 Laminate flooring
GB/T 18102-2020 Laminate floor coverings
GB 18583-2001 Indoor decorating and refurbishing materials—Limit of harmful substances of adhesives
GB 18583-2008 Indoor decorating and refurbishing materials—Limit of harmful substances of adhesives
GB/T 18992.2-2003 Crosslinked polyethylene(PE-X) piping systems for hot and cold water installations—Part 2:Pipes
GB/T 19993-2005 Thermoplastics piping systems for hot and cold water supply—Test method for the resistance of pipes and fittings mounted assemblies to thermal cycling
GB/T 28799.2-2012 Plastics piping systems for hot and cold water installations—Polyethylene of raised temperature resistance(PE-RT)—Part 2:Pipes
GB/T 28799.2-2020 Polyethylene of raised temperature resistance (PE-RT) piping systems for hot and cold water installations—Part 2:Pipes
GB/T 28799.5-2020 Polyethylene of raised temperature resistance (PE-RT) piping systems for hot and cold water installations—Part 5:Fitness for purpose of the system
GB/T 29730-2013 Distribution manifold of cold/hot water
GB/T 41077-2021 Thermal insulating products for building applications—Limit value of hexabromocyclododecanes
GB 50222-2017 Code for fire prevention indesign of interior decoration of buildings
GB 50222-1995 Code for Fire Prevention in Design of Interior Decoration of Buildings
JC/T 412.1-2018 Fiber cement sheet - Part 1: Asbestos-free fiber cement sheet
JC/T 412.1-2006 Fiber cement flat sheets Part 1:Non-Asbestos Fiber cement flat sheets
JC/T 799-2016 Decorative Gypsum Board
JC/T 799-2007 Decorative Gypsum Board
JG/T 403-2013 Test methods for thermal performance of radiant cooling and heating unit
GB 55037-2022 Building Fire Protection General Standards
GB/T 29730-2025 Distribution manifold of cold/hot water
GB 8624-2025 Classification for burning behavior of building materials and products
GB/T 10801.1-2025 Moulded polystyrene foam(EPS)for thermal insulation
Related Standards
GB/T 6165-1985
Replaced
GB/T 6166-1985
Replaced
GB/T 6166-1985 Methods for testing the performance of high efficiency filter media—Penetration and resistance
GB/T 6167.1-1985
Replaced
GB/T 6167.1-1985 Methods for testing the performance of dust particle counter—Calibration for sizing particle
GB/T 6167.2-1985
Replaced
GB/T 6167.2-1985 Methods for testing the performance of dust particle counter—Particle concentration
GB/T 7725-1996
Replaced
GB/T 7725-1996 Room air conditioners
JG/T 14-1999
Replaced