GB/T 3475-1983
Replaced
GB/T 36658-2018
Active
National standards
GB/T 36658-2018 Technical specification of marine diesel-natural gas dual fuel engine
GB/T 36658-2018 Technical specification of marine diesel-natural gas dual fuel engine
Basic Information
Standard Code:
GB/T 36658-2018
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Maritime internal combustion engines
ICS Name:
Maritime engines and propulsion systems
Publish Date:
2018-09-17
Implement Date:
2019-04-01
Pages:
15 pages
Scope
This standard specifies the technical requirements, test methods, inspection rules, marking, packaging, transportation, and storage for marine diesel-natural gas dual-fuel engines (hereinafter referred to as engines).
This standard applies to the design, manufacture, and acceptance of four-stroke engines that operate in both pure diesel and dual-fuel modes.
Development Information
Referenced Standards
GB/T 3475-2008 Requirement and test method for speed governing system of marine diesel engine
GB/T 6072.1-2008 Reciprocating internal combustion engines—Performance—Part 1:Declarations of power,fuel and lubricating oil consumptions and test methods—Additional requirements for engines for general use
GB 8840-2009 Limit for exhaust smoke of marine diesel engine
GB 11871-2009 Limits of airborne noise emitted by marine diesel engines
天然气燃料动力船舶规范 中国船级社
钢质海船入级规范(2017) 中国船级社
防止船舶污染国际公约 国际海事组织
GB/T 191-2000 Packaging—Pictorial marking for handling of goods
GB/T 191-2008 Packaging—Pictorial marking for handling of goods
GB/T 725-1991 Internal combustion engines—Nomenclature and code of designations
GB/T 725-2008 Internal combustion engines—Nomenclature and code of designations
GB/T 5741-1985 Measurement method for exhaust gas smoke of marine diesel engine
GB/T 5741-2008 Measure method for exhaust smoke of marine diesel engine
GB/T 6388-1986 Transport package shipping mark
GB/T 8190.1-1999 Reciprocating internal combustion engines—Exhaust emission measurement—Part 1:Test-bed measurement of gaseous and particulate exhaust emissions
GB/T 8190.1-2010 Reciprocating internal combustion engines—Exhaust emission measurement—Part 1:Test-bed measurement of gaseous and particulate exhaust emissions
GB/T 8190.1-2023 Reciprocating internal combustion engines—Exhaust emission measurement—Part 1:Test-bed measurement systems of gaseous and particulate emissions
GB/T 8190.4-1999 Reciprocating internal combustion engines—Exhaust emission measurement—Part 4:Test cycles for different engine applications
GB/T 8190.4-2010 Reciprocating internal combustion engines—Exhaust emission measurement—Part 4:Steady-state test cycles for different engine applications
GB/T 8190.4-2023 Reciprocating internal combustion engines—Exhaust emission measurement—Part 4:Steady-state and transient test cycles for different engine applications
GB/T 9911-1988 Measurement method of airborne noise emitted by marine diesel engine
GB/T 9911-2009 Measure method of airborne noise emitted by marine diesel engine
GB/T 9911-2018 Measurement of airborne noise emitted by marine diesel engine
GB/T 9969-2008 General principles for preparation of instructions for use of industrial products
GB 9969.1-1998 General principles for preparation of instructions for use of industrial products
GB/T 13306-1991 Plates
GB/T 13306-2011 Plates
GB/T 15097-1994 Measurement method for emission pollutants of exhaust gas of marine diesel engine
GB/T 15097-2008 Measure method for emission pollutant of exhaust gas of marine diesel engine
GB/T 20651.1-2006 Reciprocating internal combustion engines—Safety—Part 1:Compression ignition engines
GB/T 20651.1-2018 Reciprocating internal combustion engines—Safety—Part 1:Compression ignition engines
GB/T 20651.2-2014 Reciprocating internal combustion engines—Safety—Part 2:Spark ignition engines
CB/T 3154-2011 The measurement method for vibration of marine diesel engine
CB/T 3253-2013 Marine diesel engine technical specification
CB/T 3254.1-2013 Marine Diesel Engine Test Stand Evaluation - Part 1: Standard Reference Conditions and Power Fuel Consumption and Oil Consumption Calibration
CB/T 3254.2-2013 Marine Diesel Engine bench test - Part 2: Test methods
CB/T 3853-2011 The measurement method for vibration of marine diesel engine shaft system
CB/T 3254.1-1994 Marine diesel engine bench test Standard environmental conditions and power fuel consumption and oil consumption verification
CB/T 3853-1999 Measuring method for torsional vibration of marine diesel engine shafting
GB 15097-2016 Limits and measurement methods for exhaust pollutants from marine engines (CHINAⅠ、Ⅱ)
GB/T 191-2025 Graphical symbols marking for handling and storage of packages
Related Standards
GB/T 3476-1983
Replaced
GB/T 3476-1983 Speed governing of marine diesel engine, methods of test
GB/T 5741-1985
Replaced
GB/T 5741-1985 Measurement method for exhaust gas smoke of marine diesel engine
GB/T 6301-1986
Abolished
GB/T 6301-1986 Determination of fuel consumption rate for marine diesel engine
GB/T 6302-1986
Abolished
GB/T 6302-1986 Measurement of thermodynamics parameters for marine diesel engine
GB/T 6303-1986
Abolished