GB/T 16400-1996
Replaced
GB/T 17748-2008
Replaced
National standards
GB/T 17748-2008 Aluminium-plastic composite panel for curtain wall
GB/T 17748-2008 Aluminium-plastic composite panel for curtain wall
Basic Information
Standard Code:
GB/T 17748-2008
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Decoration materials
ICS Name:
Other building materials
Publish Date:
2008-05-12
Implement Date:
2008-11-01
Pages:
25 pages
Scope
This standard specifies the terms and definitions, classification, specifications and markings, materials, requirements, test methods, inspection rules, marking, packaging, transportation, storage, and accompanying documents for aluminum-plastic composite panels used in building curtain walls (hereinafter referred to as curtain wall panels). The standard is primarily applicable to aluminum-plastic composite panels used in building curtain walls. Aluminum-plastic composite panels for other purposes may also refer to this standard.
Development Information
Replace the following standards
Superseded by the following standards
Referenced Standards
GB/T 1766-1995 Paint and varnish—Rating schemes of degradation of coats
GB/T 191-2000 Packaging—Pictorial marking for handling of goods
GB/T 191-2008 Packaging—Pictorial marking for handling of goods
GB/T 1634.2-2004 Plastics—Determination of temperature of deflection under load—Part 2:Plastics,ebonite and long-fibre-reinforced composites
GB/T 1634.2-2019 Plastics—Determination of temperature of deflection under load—Part 2:Plastics and ebonite
GB/T 1720-2020 Circle-drawing test of coating films
GB/T 1732-1993 Determination of impact resistance of film
GB/T 1732-2020 Determination of impact resistance of coating films
GB/T 1740-2007 Determination of resistance to heat and humidity of paint films
GB/T 1771-1991 Paints and varnishes—Determination of resistance to neutral salt spray
GB/T 1771-2007 Paints and varnishes—Determination of resistance to neutral salt spray(fog)
GB/T 2918-1998 Plastics—Standard atmospheres for conditioning and testing
GB/T 2918-2018 Plastics—Standard atmospheres for conditioning and testing
GB/T 3880.2-2006 Wrought aluminium and aluminium alloy plates,sheets and strips for general engineering—Part 2:Mechanical properties
GB/T 3880.2-2012 Wrought aluminium and aluminium alloy plates,sheets and strips for general engineering—Part 2:Mechanical properties
GB/T 3880.2-2024 Wrought aluminium and aluminium alloy plates,sheets and strips for general engineering—Part 2:Mechanical properties
GB/T 4957-2003 Non-conductive coatings on non-magnetic basis metals—Measurement of coating thickness-Eddy current
GB/T 6388-1986 Transport package shipping mark
GB/T 6739-1996 Determination of film hardness by pencil test
GB/T 6739-2006 Paints and varnishes—Determination of film hardness by pencil test
GB/T 6739-2022 Paints and varnishes—Determination of film hardness by pencil test
GB 8624-1997 Classification on burning behaviors for building materials
GB 8624-2006 Classification for burning behavior of building materials and products
GB 8624-2012 Classification for burning behavior of building materials and products
GB/T 9286-1998 Paints and varnishes—Cross cut test for films
GB/T 9286-2021 Paints and varnishes—Cross-cut test
GB/T 9754-1988 Paints and varnishes—Measurement of specular gloss of non-metallic paint films at 20°, 60°and 85°
GB/T 9754-2007 Paints and varnishes—Determination of specular gloss of non-metallic paint films at 20°,60°and 85°
GB/T 9780-1988 Test method for dirt resistance of film of architectural coatings and paint
GB/T 9780-2005 Test method for dirt pickup resistance of film of architectural coatings and paints
GB/T 9780-2013 Test method for dirt pickup resistance and stain remvoal of film of architectural coatings and paint
GB 11115-1989 Low density polyethylene resin
GB/T 11115-2009 Polyethylene(PE) resin
GB 11116-1989 High density polyethylene resin
GB/T 11942-1989 Colorimetric methods for color building materials
GB/T 11942-2022 Test method of chroma for colour building materials
GB/T 15182-1994 Linear low density polyethylene resin
GB/T 16259-1996 Test method for color changes in accelerated weathering of colored building materials
GB/T 16259-2008 Test method for in accel erated weathering building materials
GB/T 9754-2025 Paints and varnishes—Determination of gloss value at 20°、60° and 85°
GB/T 191-2025 Graphical symbols marking for handling and storage of packages
GB/T 4957-2025 Non-conductive coatings on non-magnetic electrically conductive base metals—Measurement of coating thickness—Amplitude-sensitive eddy-current method
GB 8624-2025 Classification for burning behavior of building materials and products
Related Standards
GB/T 16401-1996
Replaced
GB/T 16401-1996 Test method for water absorption of mineral wool products
GB/T 17748-1999
Replaced
GB/T 17748-1999 Aluminium-plastic composite panel
GB/T 8627-1999
Replaced
GB/T 8627-1999 Test method for density of smoke from the burning or decomposition of building materials
JG/T 167-2004
Replaced
JG/T 167-2004 Carbon fiber laminate for strengthening and restoring structures
JG/T 206-2007
Replaced