T/CSBME 067-2023 Active Group standards

T/CSBME 067-2023 Medical large-diameter liquid nitrogen biological container

T/CSBME 067-2023 Medical large-diameter liquid nitrogen biological container

Publish Date: 2023-06-30 Implement Date: 2023-10-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Price: $ 26.00

Basic Information

Standard Code: T/CSBME 067-2023

Standard Type: Group standards

Standard Status: Active

is_force_gb: no

CCS Name: Refrigeration equipment

ICS Name: Cans, tins, and tubes

Publish Date: 2023-06-30

Implement Date: 2023-10-01

Pages: 16 pages

Scope

This document specifies the performance requirements, test methods, marking, packaging, transportation, and storage of medical large-diameter liquid nitrogen biological containers (hereinafter referred to as liquid nitrogen tanks). This document is applicable to storage devices that use liquid nitrogen as a cooling source, with an internal temperature not lower than -196 ℃, an effective volume not exceeding 1,830 L, and a diameter not less than 315 mm.

Development Information

Word Count: 26 Thousand words Pages: 16 pages

Referenced Standards

GB/T 229-1994 Metallic materials—Charpy notch impact test GB/T 229-2007 Metallic materials—Charpy pendulum impact test method GB/T 229-2020 Metallic materials—Charpy pendulum impact test method GB 4793.1-1995 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 1:General requirements GB 4793.1-2007 Safety requirements for electrical equipment for measurement, control, and laboratory use—Part 1:General requirements GB/T 13550-1992 Molecular sieve 5A and its determination GB/T 13550-2015 Molecular sieve 5A and its determination GB/T 18268.1-2010 Electrical equipment for measurement,control and laboratory use—EMC requirements—Part 1:General requirements GB/T 24511-2009 Stainless steel plate,sheet and strip for pressure equipments GB/T 24511-2017 Stainless steel and heat resisting steel plate,sheet and strip forpressure equipments GB/T 31480-2015 Materials for high vacuum multilayer insulation of cryogenic vessel HG/T 2690-2012 13X molecular sieve HG/T 2690-1995 13X Molecular Sieve NB/T 47018.1-2017 Welding Material for Pressure Equipment Ordering Technical Specification Part 1: Purchase General Rules NB/T 47018.1-2011 Technical permission of welding materials for pressure equipment Section 1:General rule NB/T 47018.2-2017 The technical requirements for ordering welding materials for pressure equipment Part 2: Steel welding rods NB/T 47018.2-2011 Technical permission of welding materials for pressure equipment Section 2:Electrodes for steel NB/T 47018.3-2017 Specifications for Welding Materials for Pressure Equipment - Part 3: Gas-protected Electric Arc Welding Wire and Filler Wire NB/T 47018.3-2011 Technical permission of welding materials for pressure equipment Section 3:Steel electrodes and rods for gas shielded arc welding NB/T 47018.4-2017 Specification for Welding Materials for Pressure Equipment Part 4: Filler Steel Welding Wire and Welding Solder for Submerged-Arc Welding NB/T 47018.4-2011 Technical permission of welding materials for pressure equipment Section 4:Electrodes and fluxes for submerged arc welding NB/T 47018.5-2017 "Specifications for welding materials used in pressure equipment - Part 5: Stainless steel welding strips and welding fluxes for overlay welding" NB/T 47018.5-2011 Technical permission of welding materials for pressure equipment Section 5:Stainless steel strip electrodes and fluxes for overlay welding NB/T 47018.6-2011 Technical permission of welding materials for pressure equipment Section 6:Bare aluminum and aluminum-alloy welding electrodes and rods NB/T 47018.7-2011 Technical permission of welding materials for pressure equipment Section 7:Titanium and titanium-alloy welding electrodes and rods GB/T 18268.1-2025 Electrical equipment for measurement,control and laboratory use—EMC requirements—Part 1:General requirements

Related Standards

GB 10440-1989 Replaced

GB 10440-1989 Round composite cans

Publish Date: 1989-03-22

GB/T 10785-1989 Replaced

GB/T 10785-1989 A series of specifications for light gauge metal containers-open-top-round cans

Publish Date: 1989-03-31

GB 14174-1993 Replaced

GB 14174-1993 Large calibre liquid nitrogen container

Publish Date: 1993-02-16

GB/T 14251-1993 Replaced

GB/T 14251-1993 Technical specifications of round tin—Plate container for canned foods

Publish Date: 1993-03-16

GB/T 16876-1997 Replaced

GB/T 16876-1997 Test methods for interspace vacuum of liquid nitrogen containers

Publish Date: 1997-06-16

GB/T 5458-1997 Replaced

GB/T 5458-1997 Liquid nitrogen biological container

Publish Date: 1997-06-16