GB/T 3507-1983
Replaced
GB/T 26103.1-2010
Active
National standards
GB/T 26103.1-2010 Curved tooth coupling GⅡCL
GB/T 26103.1-2010 Curved tooth coupling GⅡCL
Basic Information
Standard Code:
GB/T 26103.1-2010
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Couplings, brakes, and transmissions
ICS Name:
Couplings, clutches, and friction devices
Publish Date:
2011-01-10
Implement Date:
2011-10-01
Pages:
16 pages
Scope
This part of GB/T 26103 specifies the types, basic parameters, and main dimensions of the GⅡCL type drum-toothed couplings (hereinafter referred to as couplings), as well as technical requirements, inspection rules, marking, packaging, and storage.
This part is applicable to GⅡCL type drum-toothed couplings, which are used to connect two horizontal coaxial drive shaft systems and have the ability to compensate for the relative displacement between the two shafts. The working environment temperature is -20 °C to +80 °C, and the nominal torque transmitted is 0.63 kN·m to 5,600 kN·m.
Development Information
Same series standard
Referenced Standards
GB/T 191-2000 Packaging—Pictorial marking for handling of goods
GB/T 191-2008 Packaging—Pictorial marking for handling of goods
GB/T 1184-1996 Geometrical tolerancing—Geometrical tolerance for features without individual tolerance indications
GB/T 3098.1-2000 Mechanical properties of fasteners—Bolts, screws and studs
GB/T 3098.1-2010 Mechanical properties of fasteners—Bolts,screws and studs
GB/T 3141-1994 Industrial liquid lubricants—ISO viscosity classification
GB/T 3852-1997 Types and dimension for coupling bores and their connection
GB/T 3852-2008 Types and dimensions for coupling bores and their connection
GB/T 3852-2017 Types and dimensions for coupling bores and their connection
GB/T 4879-1999 Rustproof packaging
GB/T 4879-2016 Rustproof packaging
GB/T 6388-1986 Transport package shipping mark
GB 7324-1994 General purpose lithium lubricating grease
GB/T 7324-2010 General purpose lithium lubricating grease
GB/T 10095.1-2001 Cylindrical gears—system of accuracy—Part 1:Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth
GB/T 10095.1-2008 Cylindrical gears—System of accuracy—Part 1:Definitions and allowable values of deviations relevant to corresponding flanks of gear teeth
GB/T 10095.1-2022 Cylindrical gears—ISO system of flank tolerance classification—Part 1:Definitions and allowable values of deviations relevant to flanks of gear teeth
GB/T 10095.2-2001 Cylindrical gears-system of accuracy—Part 2:Definitions and allowable values of deviations relevant to radial composite deviations and runout information
GB/T 10095.2-2008 Cylindrical gears—System of accuracy—Part 2:Definitions and allowable values of deviations relevant to radial composite deviations and runout information
GB/T 10095.2-2023 Cylindrical gears—ISO system of flank tolerance classification—Part 2:Definitions and allowable values of double flank radial composite deviations
GB/T 13384-1992 General specifications for packagings of mechanical and electrical products
GB/T 13384-2008 General specifications for packing of mechanical and electrical product
JB/T 5000.15-2007 Heavy Machinery General Technical Specification Part 15: Non-destructive Inspection for Forged Steel Parts
JB/T 5000.15-1998 Heavy Machinery General Technical Specification for Nondestructive Inspection of Forged Steel Parts
JB/T 6396-1992 Large alloy structural steel forgings
JB/T 6396-2006 Specification for the heavy alloy structural steel forgings
GB/T 191-2025 Graphical symbols marking for handling and storage of packages
Related Standards
GB/T 6073-1985
Replaced
GB/T 6073-1985 Type LT highly elastic frictionclutch
GB/T 13807.1-1992
Replaced
GB/T 13807.1-1992 Connections with waisted stud—Tape classification
GB/T 13807.2-1992
Replaced
GB/T 13807.2-1992 Connections with waisted stud—Studs
GB/T 13807.3-1992
Replaced
GB/T 13807.3-1992 Connections with waisted stud—Nuts, extension sleeves
GB/T 15141-1994
Replaced