GB/T 38390-2019
Active
National standards
GB/T 38390-2019 Safety and control devices for gas burners and gas-burning appliances—Particular requirements—Pressure sensing device
GB/T 38390-2019 Safety and control devices for gas burners and gas-burning appliances—Particular requirements—Pressure sensing device
Basic Information
Standard Code:
GB/T 38390-2019
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Heating, gas supply, air conditioning, and refrigeration engineering
ICS Name:
The facilities in the building
Publish Date:
2019-12-31
Implement Date:
2020-11-01
Pages:
28 pages
Scope
This standard specifies the terms and definitions, classification and grouping, structure and materials, requirements, test methods, inspection rules, marking, installation and operation instructions, packaging, transportation and storage for pressure sensing devices used in gas burners and combustion appliances as specified in GB/T 13611. This standard applies to mechanical or electric pressure switches with electronic sensing elements that monitor the pressure of gas, air, and flue gas in gas burners or combustion equipment such as gas water heaters, gas heating boilers, gas burners/engines, gas heaters, gas steamers, and gas boilers, where the maximum inlet pressure does not exceed 500 kPa.
Development Information
Referenced Standards
GB/T 14536.1-2008 Automatic electrical controls for household and similar use—Part 1:General requirements
GB/T 14536.7-2010 Automatic electrical controls for household and similar use—Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
GB/T 15092.1-2010 Switches for appliances—Part 1:General requirements
GB/T 30597-2014 General requirements of safety and control devices for gas burners and gas-burning appliances
GB/T 1634.1-2004 Plastics—Determination of temperature of deflection under load—Part 1:General test method
GB/T 1634.1-2019 Plastics—Determination of temperature of deflection under load—Part 1:General test method
GB/T 1634.2-2004 Plastics—Determination of temperature of deflection under load—Part 2:Plastics,ebonite and long-fibre-reinforced composites
GB/T 1634.2-2019 Plastics—Determination of temperature of deflection under load—Part 2:Plastics and ebonite
GB/T 1634.3-2004 Plastics—Determination of temperature of deflection under load—Part 3:High strength thermosetting laminates
GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB 4208-1993 Degrees of protection provided by enclosure (IP code)
GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)
GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)
GB/T 13611-1992 Classification of town gas
GB/T 13611-2006 Classification and essential property of city gas
GB/T 13611-2018 Classification and basic characteristics of city gas
GB/T 1634.1-2025 Plastics—Determination of temperature of deflection under load—Part 1:General test method
Related Standards
GB 6932-2001
Replaced
GB/T 19249-2003
Replaced
GB/T 19249-2003 Reverse osmosis water treatment equipment
GB/T 19913-2005
Replaced
GB/T 19913-2005 Cast iron heating radiator
CJ/T 245-2007
Abolished
CJ/T 245-2007 Syphonic roof outlet
CJ/T 133-2007
Replaced
CJ/T 133-2007 Integrated circuit card water meter
CJ/T 241-2007
Active