GB/T 10042-2003
Replaced
GB/T 26661-2011
Active
National standards
GB/T 26661-2011 Large SWP universal coupling with spider
GB/T 26661-2011 Large SWP universal coupling with spider
Basic Information
Standard Code:
GB/T 26661-2011
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Couplings, brakes, and transmissions
ICS Name:
Comprehensive knowledge of shafts and couplings
Publish Date:
2011-06-16
Implement Date:
2012-03-01
Pages:
17 pages
Scope
This standard specifies the types, basic parameters and dimensions, technical requirements, inspection rules, and marking, packaging, storage, etc. of SWP large cross-shaft universal joints (hereinafter referred to as large universal joints).
This standard applies to large universal joints used to connect two drive shaft systems with different axes, with a rotating diameter of 600 mm to 1,200 mm; a nominal torque transmission of 1,150 kN·m to 12,500 kN·m; and an axial angle of 5° to 15°.
Development Information
Referenced Standards
GB/T 191-2000 Packaging—Pictorial marking for handling of goods
GB/T 191-2008 Packaging—Pictorial marking for handling of goods
GB/T 197-2003 General purpose metric screw threads—Tolerances
GB/T 197-2018 General purpose metric screw threads—Tolerances
GB/T 307.1-1994 Rolling bearings—Radial bearings—Tolerances
GB/T 307.1-2005 Rolling bearings—Radial bearings—Tolerances
GB/T 307.1-2017 Rolling bearings—Radial bearings—Geometrical product specifications(GPS)and tolerance values
GB/T 1184-1996 Geometrical tolerancing—Geometrical tolerance for features without individual tolerance indications
GB/T 1800.2-1998 Limits and fits—Bases—Part 2:Basic rules of tolerances, deviations and fits
GB/T 1800.2-2009 Geometrical Product Specifications (GPS)—Limits and fits—Part 2:Tables of standard tolerance grades and limit deviations for holes and shafts
GB/T 1800.2-2020 Geometrical product specifications(GPS)—ISO code system for tolerances on linear sizes—Part 2:Tables of standard tolerance classes and limit deviations for holes and shafts
GB/T 3098.1-2000 Mechanical properties of fasteners—Bolts, screws and studs
GB/T 3098.1-2010 Mechanical properties of fasteners—Bolts,screws and studs
GB/T 3098.4-2000 Mechanical properties of fasteners—Nuts—Fine pitch thread
GB/T 4604-1993 Rolling bearings—Radial internal clearance
GB/T 4604-2006 Rolling bearings—Radial internal clearance
GB/T 4604.1-2012 Rolling bearings—Internal clearance—Part 1:Radial internal clearance for radial bearings
GB/T 4604.2-2013 Rolling bearings—Internal clearance—Part 2:Axial internal clearance for four-point-contact ball bearings
GB/T 4879-1999 Rustproof packaging
GB/T 4879-2016 Rustproof packaging
GB/T 6388-1986 Transport package shipping mark
GB/T 13384-1992 General specifications for packagings of mechanical and electrical products
GB/T 13384-2008 General specifications for packing of mechanical and electrical product
JB/T 5000.15-2007 Heavy Machinery General Technical Specification Part 15: Non-destructive Inspection for Forged Steel Parts
JB/T 5000.3-2007 Heavy Machinery General Technical Conditions Part 3: Welding Parts
JB/T 5000.3-1998 Heavy Machinery General Technical Conditions - Welding Parts
JB/T 5000.15-1998 Heavy Machinery General Technical Specification for Nondestructive Inspection of Forged Steel Parts
GB/T 191-2025 Graphical symbols marking for handling and storage of packages
Related Standards
GB/T 10043-2003
Replaced
GB/T 10043-2003 Clutch—Classification
GB/T 3507-2008
Active
GB/T 3507-2008 Nominal torque series of the mechanical coupling
GB/T 3852-2008
Replaced
GB/T 3852-2008 Types and dimensions for coupling bores and their connection
GB/T 9149-2008
Active
GB/T 9149-2008 General specification for magnetic particle clutch
GB/T 26660-2011
Active