GB/T 6915-1986
Abolished
GB/T 3667.2-2008
Replaced
National standards
GB/T 3667.2-2008 AC motor capacitors—Part 2:Motor start capacitors
GB/T 3667.2-2008 AC motor capacitors—Part 2:Motor start capacitors
Basic Information
Standard Code:
GB/T 3667.2-2008
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Power capacitors
ICS Name:
Power capacitors
Publish Date:
2008-10-29
Implement Date:
2009-10-01
Pages:
29 pages
Scope
This section applies to motor starting capacitors for asynchronous motors whose windings are intended to be connected to a single-phase system with a frequency of 100 Hz or lower.
This section applies to metallized motor starting capacitors, whether they are dipped or not, made from paper or plastic film, or a combination of both, and to motor starting electrolytic capacitors with a non-solid electrolyte, with a rated voltage of 660 V or lower.
Development Information
Replace the following standards
Superseded by the following standards
Referenced Standards
GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)
GB/T 11918-2001 Plugs, socket-outlets and couplers for industrial purposes—Part 1:General requirements
ISO 4046
GB/T 2423.3-1993 Basic environmental testing procedures for electric and electronic products—Test Ca:Damp heat, steady state
GB/T 2423.3-2006 Environmental testing for electric and electronic products—Part 2:Testing method—Test Cab:Damp heat, steady state
GB/T 2423.3-2016 Environmental testing—Part 2:Testing method—Test Cab:Damp heat,steady state
GB/T 2423.10-1995 Environmental testing for electric and electronic products—Part 2:Test methods—Test Fc and guidance:Vibration (Sinusoidal)
GB/T 2423.10-2008 Environmental testing for electric and electronic products—Part 2:Tests methods Test Fc:Vibration(sinusoidal)
GB/T 2423.10-2019 Environmental testing—Part 2:Tests methods—Test Fc:Vibration(sinusoidal)
GB/T 2423.22-2002 Environmental testing for electric and electronic products—Part 2:Test methods Test N:Change of temperature
GB/T 2423.22-2012 Environmental testing—Part 2:Test methods—Test N:Change of temperature
GB/T 2423.28-2005 Environmental testing for electric and electronic products—Part 2:Test methods—Test T:Soldering
GB/T 4207-2003 Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions
GB/T 4207-2012 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
GB/T 4207-2022 Method for the determination of the proof and the comparative tracking indices of solid insulating materials
GB/T 5169.10-1997 Fire hazard testing for electric and electronic products—Test methods—Glow-wire test methods—General
GB/T 5169.10-2006 Fire hazard testing for electric and electronic products—Part 10:Glow/hot-wire based test methods—Glow-wire apparatus and common test procedure
GB/T 5169.10-2017 Fire hazard testing for electric and electronic products—Part 10:Glowing/hot-wire based test methods—Glow-wire apparatus and common test procedure
GB/T 5169.11-1997 Fire hazard testing for electric and electronic products—Test methods—Glow-wire end-product test and guidance
GB/T 5169.11-2006 Fire hazard testing for electric and electronic products—Part 11:Glowing/hot-wire based test methods—Glow-wire flammability test method for end-products
GB/T 5169.11-2017 Fire hazard testing for electric and electronic products—Part 11:Glowing/hot-wire based test methods—Glow-wire flammability test method for end-products(GWEPT)
Adopt standards
IEC 60252-2:2003
Related Standards
GB/T 13865-1992
Abolished
GB/T 13865-1992 Instrument for electric load control
GB/T 6916-1997
Replaced
GB/T 6916-1997 Power capacitors for damp tropics
GB 3667-1997
Replaced
GB 3667-1997 A.C. motor capacitors
GB/T 17702.1-1999
Replaced
GB/T 17702.1-1999 Power electronic capacitors—Part 1:General
GB/T 17702.2-1999
Replaced