DZ/T 0101.12-1994
Active
YB/T 042-1993
Replaced
Industry standards-Black metallurgy
YB/T 042-1993 metallurgical lime
YB/T 042-1993 metallurgical lime
Basic Information
Standard Code:
YB/T 042-1993
Standard Type:
Industry standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
-
ICS Name:
-
Publish Date:
1993-04-14
Implement Date:
1993-11-01
Pages:
8 pages
Development Information
Replace the following standards
ZBQ 27001-1985
Referenced Standards
ZB Q27 002
GB/T 2007.1-1987 General rules for the sampling and sample preparation of minerals in bulk—Sampling by manual method
GB/T 2007.2-1987 General rules for the sampling and sample preparation of minerals in bulk Sample preparation by manual method
GB/T 2007.3-1987 General rules for the sampling and sample preparation of minerals in bulk—Experimental method for evaluation of quality variation
GB/T 2007.4-1987 General rules for the sampling and sample preparation of minerals in bulk—Experimental methods for checking the precision
GB/T 2007.4-2008 General rules for the sampling and sample preparation of minerals in bulk—Experimental methods for checking the precision and bias
GB/T 2007.5-1987 General rules for the sampling and sample preparation of minerals in bulk—Experimental method for checking the bias of sampling
GB/T 2007.6-1987 General rules for the sampling and sample preparation of minerals in bulk—Determination of moisture content—Heat drying method
GB/T 2007.7-1987 General rules for the sampling and sample preparation of minerals in bulk—The method for determination of size by manual sieving
GB/T 3286.1-1998 Methods for chemical analysis of limestone and dolomite—The determination of calcium oxide and magnesium oxide content
GB/T 3286.1-2012 Methods for chemical analysis of limestone and dolomite—Part 1:The determination of calcium oxide and magnesium oxide content—The complexometric titration method and the flame atomic absorption spectrometric method
GB/T 3286.2-1998 Methods for chemical analysis of limestone and dolomite—The determination of silicon dioxide content
GB/T 3286.2-2012 Methods for chemical analysis of limestone and dolomite—Part 2:The determination of silicon dioxide content—The silicomolybdic blue spectrophotometric method and the perchloric acid dehydration gravimetric method
GB/T 3286.3-1998 Methods for chemical analysis of limestone and dolomite—The determination of aluminium oxide content
GB/T 3286.3-2012 Methods for chemical analysis of limestone and dolomite—Part 3:The determination of aluminium oxide content—The chrome azurol S spectrophotometric method and the complexometric titration method
GB/T 3286.4-1998 Methods for chemical analysis of limestone and dolomite—The determination of iron oxide content
GB/T 3286.4-2012 Methods for chemical analysis of limestone and dolomite—Part 4:The determination of iron oxide content—The o-phenanthroline spectrophotometric method and the flame atomic absorption spectrometric method
GB/T 3286.5-1998 Methods for chemical analysis of limestone and dolomite—The determination of manganese oxide content
GB/T 3286.5-2014 Method for chemical analysis of limestone and dolomite—Part 5:The determination of manganese oxide content—The periodate oxidation spectrophotometric method
GB/T 3286.6-1998 Methods for chemical analysis of limestone and dolomite—The determination of phosphorus content
GB/T 3286.6-2014 Methods for chemical analysis of limestone and dolomite—Part 6:The determination of phosphorus content—The phosphomolybdate blue spectrophotometric method
GB/T 3286.7-1998 Methods for chemical analysis of limestone and dolomite—The determination of sulphur content
GB/T 3286.7-2014 Methods for chemical analysis of limestone and dolomite—Part 7:The determination of sulphur content—The pipe furnace combustion iodic acid potassium titration method,the high frequency combustion with infrared absorption method and the barium sulfate gravimetric method
GB/T 3286.8-1998 Methods for chemical analysis of limestone and dolomite—The determination of loss on ignition
GB/T 3286.8-2014 Method for chemical analysis of limestone and dolomite—Part 8:The determination of loss on ignition—The gravimetric method
GB/T 3286.9-1998 Methods for chemical analysis of limestone and dolomite—The determination of carbon dioxide content
GB/T 3286.9-2014 Method for chemical analysis of limestone and dolomite—Part 9:The determination of carbon dioxide content—The caustic asbestos absorption gravimetric method
GB/T 3286.10-2020 Methods for chemical analysis of limestone and dolornite—Part 10:Determination of titanium dioxide content—Diantipyrylmethane spectrophotometric method
GB/T 3286.11-2022 Methods for chemical analysis of limestone and dolomite—Part 11:Determination of calcium oxide,magnesium oxide,silicon dioxide,aluminium oxide and iron oxide content—Wavelength dispersive X-ray fluorescence spectrometry (Fused cast bead method)
GB/T 3286.12-2023 Methods for chemical analysis of limestone and dolornite—Part 12:Determination of potassium oxide and sodium oxide contents—Flame atomic absorption spectrometry method
GB/T 8170-1987 Rules for rounding off of numberical values
GB/T 8170-2008 Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 3286.2-2025 Methods for chemical analysis of limestone and dolomite—Part 2:Determination of silicon and aluminium content
Related Standards
JJG 204-1980
Active
JJG 204-1980 Meteorological Ventilation Psychrometer
SC 53-1980
Active
SC 53-1980 Transfer blade hydraulic steering gear repair quality standard
DZ 4-1981
Replaced
DZ 4-1981
SC 69-1982
Active
SC 69-1982 ZSS-12 Flash-type seawater desalination production device technical specifications
SC 72-1982
Active