MT/T 744-1997
Active
GB/T 39201-2020
Active
National standards
GB/T 39201-2020 Technical specifications for extraction of aluminum oxide from high-alumina fly ash
GB/T 39201-2020 Technical specifications for extraction of aluminum oxide from high-alumina fly ash
Basic Information
Standard Code:
GB/T 39201-2020
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Integrated Environmental Protection
ICS Name:
Other standards related to waste
Publish Date:
2020-10-11
Implement Date:
2021-05-01
Pages:
20 pages
Scope
This standard specifies the technical principles, raw material requirements, technical requirements, product quality requirements, testing methods, by-products, and waste recycling for the extraction of alumina from high-aluminum fly ash.
This standard is applicable to the industrial design, process control, and product quality control of alumina extraction using the pre-desilication soda-lime sintering method.
Development Information
Referenced Standards
GB/T 212-2008 Proximate analysis of coal
GB/T 213-2008 Determination of calorific value of coal
GB/T 214-2007 Determination of total sulfur in coal
GB/T 260-2016 Test method for water in petroleum products—Distillation method
GB/T 264-1983 Petroleum products—Determination of acid number
GB/T 265-1988 Petroleum products—Determination of kinematic viscosity and calculation of dynamic viscosity
GB/T 511-2010 Petroleum,petroleum products and additives—Method for determination of mechanical admixtures
GB/T 1574-2007 Test method for analysis of coal ash
GB/T 3286.1-2012 Methods for chemical analysis of limestone and dolomite—Part 1:The determination of calcium oxide and magnesium oxide content—The complexometric titration method and the flame atomic absorption spectrometric method
GB/T 3286.2-2012 Methods for chemical analysis of limestone and dolomite—Part 2:The determination of silicon dioxide content—The silicomolybdic blue spectrophotometric method and the perchloric acid dehydration gravimetric method
GB/T 3536-2008 Petroleum products—Determination of flash and fire points—Cleveland open cup method
GB/T 4348.1-2013 Sodium hydroxide for industrial use—Determination of sodium hydroxide and sodium carbonate content
GB/T 4348.2-2014 Sodium hydroxide for industrial use—Determination of sodium chloride content—Mercurimetric method
GB 5085.3
GB 5085.7
GB/T 6609.2-2009 Chemical analysis methods and determination of physical performance of aluminium hydroxide—Part 2:Determination of loss of mass at 300 ℃ and 1 000 ℃
GB/T 6609.3-2004 Chemical analysis methods and determination of physical performance of alumina—Determination of silicon dioxide content-Molybdenum blue photometric method
GB/T 6609.4-2004 Chemical analysis methods and determination of physical performance of alumina—Determination of ferric oxide content-Orthophenanthroline photometric method
GB/T 6609.5-2004 Chemical analysis methods and determination of physical performance of alumina—Determination of sodium oxide content
GB 18599
YS/T 534.1-2007 Chemical analysis methods of aluminium hydroxide—Part 1:Determination of moisture—Gravimetric method
YS/T 534.2-2007 Chemical analysis methods of aluminium hydroxide—Part 2:Determination of the loss of mass at 1 100℃—Gravimetric method
YS/T 534.3-2007 Chemical analysis methods of aluminium hydroxide—Part 3:Determination of silicon dioxide content—Molybdenum blue photometric method
YS/T 534.4-2007 Chemical analysis methods of aluminium hydroxide—Part 4:Determination of iron oxide content—Orthophenanthroline photometric method
YS/T 534.5-2007 Chemical analysis methods of aluminium hydroxide—Part 5:Determination of sodium oxide content
YS/T 575.1-2007 Methods for chemical analysis of bauxite—Part 1:Determination of aluminium oxide content—EDTA titrimetric method
YS/T 575.3-2007 Methods for chemical analysis of bauxite—Part 3:Determination of silicon dioxide content—Molybdenum blue photometric method
YS/T 575.5-2007 Methods for chemical analysis of bauxite—Part 5:Determination of iron oxide content—Orthophenanthroline photometric method
YS/T 575.9-2007 Methods for chemical analysis of bauxite—Part 9:Determination of potassium oxide and sodium oxide content—Flame atomic absorption spectorphotometric method
YS/T 575.18-2007 Methods for chemical analysis of bauxite—Part 18:Determination of total carbon content—Non-aqueous titrametric method after combustion
国家危险废物名录(环境保护部令〔2016〕第39号)
GB/T 210.1-2004 Specification and determination methods of sodium carbonate for industrial use—Part 1:Sodium carbonate for industrial use
GB/T 4294-1997 Aluminium hydroxide
GB/T 4294-2010 Aluminium hydroxide
GB 12348-1990 Standard of noise at boundary of industrial enterprises
YS/T 803-2012 Smelter grade alumina
MT/T 371-2005 Method for Determination of Sulfate Ions in Coal Mine Water - MT/T 371-2005
YS/T 803-2023 metallurgical grade alumina
GB 25465-2010 Emission Standard of Pollutants from Aluminium Industry
Related Standards
GB/T 18772-2002
Replaced
GB/T 18772-2002 Technical requirement for environmental monitor on landfill site of domestic refuse
GB/T 18773-2002
Replaced
GB/T 18773-2002 Environmental sanitation standard for incineration of medical treatment wastes
GB/T 19095-2003
Replaced
GB/T 19095-2003 The classification signs of municipal domestic waste
GB/T 18772-2008
Replaced
GB/T 18772-2008 Technical requirement for environmental monitor on sanitary landfill site of domestic refuse
GB/T 18773-2008
Active