GB/T 2029-1980
Replaced
GB/T 27891-2011
Active
National standards
GB/T 27891-2011 Carbon steel press-fittings
GB/T 27891-2011 Carbon steel press-fittings
Basic Information
Standard Code:
GB/T 27891-2011
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Marine pipe fittings
ICS Name:
\n Piping system
Publish Date:
2011-12-30
Implement Date:
2012-06-01
Pages:
32 pages
Scope
This standard specifies the terms, classification and marking, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of compression fittings (hereinafter referred to as fittings) connected to thin-walled carbon steel pipes (hereinafter referred to as pipes).
This standard applies to the design, manufacture, and acceptance of fittings for fire-fighting pipelines with a design pressure not exceeding 1.6 MPa and a nominal size not exceeding DN 100, as well as heating, air, and gas pipelines with a medium temperature not exceeding 110 °C.
Development Information
Referenced Standards
GB/T 700-2006 Carbon structural steels
GB/T 1682-1994 Rubber, vulcanized—Determination of low-temperature brittleness(single test piece method)
GB/T 1804-2000 General tolerances for linear and angular dimensions without individual tolerance indications
GB/T 3091-2008 Welded steel pipes for low pressure liquid delivery
GB/T 10125-1997 Corrosion tests in artificial atmospheres—Salt spray tests
GB/T 13912-2002 Metallic coatings—Hot dip galvanized coatings on fabricated iron and steel articles—Specifications and test methods
GB/T 15256-1994 Rubber, vulcanized—Determination of low-temperature brittleness(multiple test piece method)
CB/Z 343-2005
GB/T 191-2000 Packaging—Pictorial marking for handling of goods
GB/T 191-2008 Packaging—Pictorial marking for handling of goods
GB/T 528-1998 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties
GB/T 528-2009 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties
GB/T 531-1999 Rubber—Determination of indentation hardness by means of pocket hardness meters
GB/T 531.1-2008 Rubber,vulcanized or thermoplastic—Determination of indentation hardness—Part 1:Duromerer method(Shore hardness)
GB/T 531.2-2009 Rubber,vulcanized or thermoplastic—Determination of indentation hardness—Part 2:IRHD pocket meter method
GB/T 1685-1982 Rubber, vulcanized—Determination of stress relaxation in compression at normal and at elevated temperature
GB/T 1685-2008 Rubber,vulcanized or thermoplastic—Determination of stress relaxation in compression at ambient and at elevated temperatures
GB/T 1685.2-2019 Rubber,vulcanized or thermoplastic—Determination of stress relaxation in compression—Part 2:Testing with temperature cycling
GB/T 1690-1992 Rubber, vulcanized-Determination of the effect of liquids
GB/T 1690-2006 Rubber,vulcanized or thermoplastic—Determination of the effect of liquids
GB/T 1690-2010 Rubber,vulcanized or thermoplastic—Determination of the effect of liquids
GB/T 3512-2001 Rubber, vulcanized or thermoplastic—Accelerated ageing and heat resistance tests—Air-oven method
GB/T 3512-2014 Rubber, vulcanized or thermoplastic—Accelerated ageing and heat resistance tests—Air-oven method
GB/T 5720-1993 Test methods for rubber O rings
GB/T 5720-2008 Test methods for rubber O-rings
GB/T 5721-1993 General rules of identification, packaging, transportation and storage for rubber sealing products
GB/T 7306.1-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads—Part 1:Parallel internal and taper external threads
GB/T 7759-1996 Rubber, Vulcanized or thermoplastic—Determination of compression set at ambient elevated or low temperatures
GB/T 7759.1-2015 Rubber,vulcanized or thermoplastic—Determination of compression set—Part 1:At ambient or elevated temperatures
GB/T 7759.2-2014 Rubber,vulcanized or thermoplastic—Determination of compression set—Part 2:At low temperatures
GB/T 7762-2003 Rubber, vulcanized or thermoplastic—Resistance to ozone cracking—Static strain test
GB/T 7762-2014 Rubber,vulcanized or thermoplastic—Resistance to ozone cracking—Static strain testing
GB/T 12829-2006 Rubber,vulcanized or thermoplastic—Determination of tear strength of small test pieces (Delft test pieces)
GB/T 191-2025 Graphical symbols marking for handling and storage of packages
Related Standards
GB/T 2030-1980
Replaced
GB/T 2030-1980 Bronze suction valve for seaward sluice
GB 3033-1982
Replaced
GB 3033-1982 Paint colors for marine pipes and their identification symbols
GB/T 1241-1983
Replaced
GB/T 1241-1983 Marine forged steel male thread stop and check valves
GB/T 594-1983
Replaced
GB/T 594-1983 Marine forged steel male thread stop valves
GB/T 595-1983
Replaced