MT/T 199-2025
Active
Industry standards-Coal
MT/T 199-2025 General specification of hydraulic drill jumbo in coal mines
MT/T 199-2025 General specification of hydraulic drill jumbo in coal mines
Price:
$ 81
Basic Information
Standard Code:
MT/T 199-2025
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Special equipment and supplies for coal mines
ICS Name:
Drilling and excavation equipment
Publish Date:
2025-06-30
Implement Date:
2025-12-30
Pages:
32 pages
Scope
This document specifies the models and basic performance parameters, requirements, inspection rules, and marking, packaging, transportation, and storage of hydraulic drilling rigs used in coal mines, and describes the corresponding test methods.
This document applies to the design, manufacture, and inspection of equipment such as hydraulic drilling rigs, hydraulic anchor drilling rigs, hydraulic deep-hole drilling rigs, mining and drilling units equipped with drilling and rock-cutting mechanisms, drilling and loading units, drilling and anchoring units, and anchor loading units (hereinafter collectively referred to as "equipment").
Development Information
Replace the following standards
Referenced Standards
GB/T 3767-1996 Acoustics—Determination of sound power levels of noise sources using sound pressure—Engineering method in an essentially free field over a reflecting plane
GB/T 3767-2016 Acoustics—Determination of sound power levels and sound energy levels of noise sources using sound pressure—Engineering methods for an essentially free field over a reflecting plane
GB 3836.1-2000 Electrical apparatus for explosive gas atmospheres—Part 1:General requirements
GB 3836.1-2010 Explosive atmospheres—Part 1:Equipment—General requirements
GB/T 3836.1-2021 Explosive atmospheres—Part 1:Equipment—General requirements
GB 3836.2-2000 Electrical apparatus for explosive gas atmospheres—Part 2:Flameproof enclosure “d”
GB 3836.2-2010 Explosive atmospheres—Part 2:Equipment protection by flameproof enclosures "d"
GB/T 3836.2-2021 Explosive atmospheres—Part 2:Equipment protection by flameproof enclosures “d”
GB 3836.4-2000 Electrical apparatus for explosive gas atmospheres—Part 4:Intrinsic safety“i”
GB 3836.4-2010 Explosive atmospheres—Part 4:Equipment protection by intrinsic safety "i"
GB/T 3836.4-2021 Explosive atmospheres—art 4:Equipment protection by intrinsic safety “i”
GB 4351-1997 General specifications for portable fire extinguishers
GB 4351-2023 Portable fire extinguishers
GB 4351.1-2005 Portable fire extinguishers—Part 1:Performance and construction
GB 4351.2-2005 Portable fire extinguishers—Part 2:Requirements for seamless steel cylinders of portable carbon dioxide fire extinguishers
GB/T 4351.3-2005 Portable fire extinguishers—Part 3:Regulations
GB/T 9969-2008 General principles for preparation of instructions for use of industrial products
GB 9969.1-1998 General principles for preparation of instructions for use of industrial products
GB/T 13813-2001 Testing method and judging rule of safety to friction spark of metallic material for coal mine
GB/T 13813-2008 Testing method and judging rule of safety to friction spark of metallic material for coal mine
GB/T 13813-2023 Testing method and judging rule of safety to friction spark of metallic material for coal mine
AQ 1043-2007 Mining Product Safety Mark Identification
JB/T 7302-2016 The General Technical Conditions for Product Packaging of Rock-boring Machinery and Pneumatic Tools
JB/T 7302-2006 Drilling machinery and pneumatic tools: General technical specifications for product packaging
JB/T 7302-1994 Rock drilling machinery and pneumatic tools - General technical specification for product packaging
MT/T 98-2006 Testing specification for hydraulic support hoses and hose assemblies
MT 113-1995 Flame and Electrostatic Resistance Test Method and Criteria for Polymer Products Used in Coal Mine Underground Workplaces
MT/T 154.1-1992 The guidelines for the preparation of coal mine electromechanical product models and management measures
MT/T 154.1-2011 Coal mine electromechanical product model designation method Part 1: Guidelines
MT/T 198-1996 General technical specifications for hydraulic rock drill used in coal mines
MT/T 198-2025 General specification of hydraulic rock drill in coal mine
MT 221-1991 Mining anti-explosion lamp for coal mines
MT/T 221-2005 Explosion proof lamp for coal mine
MT/T 238.3-2006 Cantilever Drilling Machine - Part 3: General Technical Specification
MT 399-1995 Coke loading machine inspection specifications
MT 416-1995 Coke Loading Machine General Technical Requirements
MT 818.5-1999 Flame-resistant cables for coal mines - Part 1: Movable flame-resistant flexible cables for coal mines - Part 5: Movable soft cables with rated voltage of 0.66/1.14kV and below
MT/T 818.5-2009 Coal mine electric cables - Part 5: Movable soft cables with rated voltage of 0.66/1.14kV and below
MT 818.9-1999 coal mine flame-retardant cable Part 1: Coal mine moving type flame-retardant soft cable Part 9: Coal mine moving light soft cable
MT/T 818.9-2009 Coal mine electric cables - Part 9: Rated voltage 0.3/0.5kV mine-grade mobile lightweight flexible cables
MT/T 822
TSG 21-2016 Supervision Regulation on Safety Technology for Stationary Pressure Vessel
Related Standards
GB/T 6374-1986
Replaced
GB/T 9151-1988
Replaced
GB/T 9151-1988 Terms of drilling engineering
GB/T 12761-1991
Replaced
GB/T 12761-1991 Raise-boring machines
GB/T 13343-1992
Replaced
GB/T 13343-1992 Blast hole tricone rock bits
GB/T 13344-1992
Replaced
GB/T 13344-1992 Downhole drill hammers and bits
GB/T 14446-1993
abolished_transferred