GB/T 9364.6-2023
Active
National standards
GB/T 9364.6-2023 Miniature fuses—Part 6:Fuse-holders for miniature fuse-links
GB/T 9364.6-2023 Miniature fuses—Part 6:Fuse-holders for miniature fuse-links
Price:
$ 140
Basic Information
Standard Code:
GB/T 9364.6-2023
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Low-voltage distribution electrical equipment
ICS Name:
Fuses and other overload protection devices
Publish Date:
2023-12-28
Implement Date:
2024-07-01
Pages:
48 pages
Scope
This document specifies the technical requirements for fuse holders for miniature fuses, including their rated values, protection against electric shock, electrical clearance and creepage distance, electrical requirements, mechanical requirements, thermal requirements, and durability.
This document applies to fuse holders for miniature tubular fuses that comply with GB/T 9364.2—2018 and ultra-miniature fuses that comply with GB/T 9364.3—2018. Miniature fuses are typically intended for protecting indoor electrical devices, electronic equipment, and their components.
Table 1 provides examples of fuse holder types with different characteristics.
Development Information
Same series standard
Replace the following standards
Referenced Standards
GB/T 321-2005 Preferred numbers—Series of preferred numbers
GB/T 2423.3-2016 Environmental testing—Part 2:Testing method—Test Cab:Damp heat,steady state
GB/T 2423.10-2019 Environmental testing—Part 2:Tests methods—Test Fc:Vibration(sinusoidal)
GB/T 2423.28-2005 Environmental testing for electric and electronic products—Part 2:Test methods—Test T:Soldering
GB/T 2423.30-2013 Environmental testing—Part 2:Test methods—Test XA and guidance:Immersion in cleaning solvents
GB/T 2423.43-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Mounting of specimens for vibration, impact and similar dynamic tests
GB/T 2423.55-2006 Environmental testing for electric and electronic products—Part 2:Test methods—Test Eh:Hammer tests
GB/T 2423.60-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Test U:Robustness of terminations and integral mounting devices
GB/T 2424.2-2005 Environment tests for electric and electronic products—Guidance for damp heat tests
GB/T 4208-2017 Degrees of protection provided by enclosure(IP code)
GB/T 5169.5-2020 Fire hazard testing for electric and electronic products—Part 5:Test flames—Needle-flame test method—Apparatus,confirmatory test arrangement and guidance
GB/T 5169.12-2013 Fire hazard testing for electric and electronic products—Part 12: Glowing/hot-wire based test methods—Glow-wire flammability index(GWFI) test method for materials
GB/T 5169.13-2013 Fire hazard testing for electric and electronic product—Part 13:Glowing/hot-wire based test methods—Glow-wire ignition temperature(GWIT)test method for materials
GB/T 9364.1-2015 Miniature fuses—Part 1:Definitions for miniature fuses and general requirement for miniature fuse-links
GB/T 9364.2-2018 Miniature fuses—Part 2:Cartridge fuse-links
GB/T 9364.3-2018 Miniature fuses—Part 3:Sub-miniature fuse-links
GB/T 11026.1-2016 Electrical insulating materials—Thermal endurance properties—Part 1:Ageing procedures and evaluation of test results
GB/T 16935.1-2008 Insulation coordination for equipment within low-voltage systems—Part 1:Principles,requirements and tests
GB/T 17045-2020 Protection against electric shock—Common aspects for installations and equipment
GB/T 17196-2017 Connecting devices—Flat quick-connect terminations for electrical copper conductors—Safety requirements
GB/T 17464-2012 Connecting devices—Electrical copper conductors—Safety requirements for screw-type and screwless-type clamping units—General requirements and particular requirements for clamping units for conductors from 0.2 mm2 up to 35 mm2(included)
GB/T 2900.18-1992 Electrotechnical terminology Low voltage apparatus
GB/T 2900.18-2008 Electrotechnical terminology—Low voltage apparatus
GB/T 4210-2001 Electrotechnical terminology-Electromechanical components for electronic equipment
GB/T 4210-2015 Electrotechnical terminology—Electromechanical components for electronic equipment
Adopt standards
IEC 60127-6:2014
Related Standards
GB 13539.4-1992
Replaced
GB 13955-1992
Replaced
GB 13955-1992 Installation and operation of residual current operated protective devices
GB 14285-1993
Replaced
GB 14285-1993 Technical code for relaying protection and security automatic equipment
GB 14287-1993
Replaced
GB 14287-1993 Residual current operated alarm devices for fire prevention
GB 15166.2-1994
Replaced
GB 15166.2-1994 Alternating-current high-voltage fuses Current-limiting fuses
GB 15166.3-1994
Replaced