GB/T 16400-2003
Replaced
DB32/T 4614-2023
Active
Jiangsu ProvinceLocal standards
DB32/T 4614-2023 Technical code of practice for self-thermal insulation wall system of non-fired perforated block(brick) made from sludge
DB32/T 4614-2023 Technical code of practice for self-thermal insulation wall system of non-fired perforated block(brick) made from sludge
Basic Information
Standard Code:
DB32/T 4614-2023
Standard Type:
Local standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Wall materials
ICS Name:
Soundproofing and heat insulation materials
Publish Date:
2023-12-13
Implement Date:
2024-01-13
Publisher:
江苏省市场监督管理局
Technical Committee:
江苏省工业和信息化厅
Pages:
28 pages
Scope
本文件规定了淤泥免烧多孔砌块(砖)自保温墙体系统的性能、设计、施工和验收的要求。本文件适用于新建、扩建与改建建筑中淤泥免烧多孔砌块(砖)自保温墙体系统的设计、施工和验收。
Development Information
Drafting Units:
新华盛节能科技股份有限公司、江苏省新型墙体材料协会、南京乾景生态环境规划设计研究院有限公司、常熟环境保护科技有限公司、华盛(苏州)环保科技有限公司、华盛立和(上海)环保科技有限公司、生态环境部南京环境科学研究所、苏州市安省建筑设计有限公司、常熟市工程质量检测中心、江苏南房金墙工程检测有限公司、无锡盛基建材有限公司
Drafting Persons:
任鑫、朱晓辉、张杰、王海强、王超、周佳锋、何志超、汤苏平、顾洪良、鲁成、马兵、周昊、张后虎、许红伟、殷健、周圣铖、汪芳、朱家生、张雯、张英
Referenced Standards
GB/T 4111-1997 Test methods for the small concrete hollow block
GB/T 4111-2013 Test methods for the concrete block and brick
GB 6566-2001 Limit of radionuclides in building materials
GB 6566-2010 Limits of radionuclides in building materials
GB/T 9978.8-2008 Fire-resistance tests—Elements of building construction—Part 8:Specific requirements for non-loadbearing vertical separating elements
GB/T 13475-1992 Building element—Determination of steady-state thermal transmission properties—Calibrated and guarded hot box
GB/T 13475-2008 Thermal insulation—Determination of steady-state thermal transmission Properties—Calibrated and guard hot box
GB/T 29060-2012 The bricks & blocks composited insulation materials
GB/T 29906-2013 External thermal insulation composite systems based on expanded polystyrene
GB/T 32981-2016 Test method for effective thermal conductivity of wall materials
GB 50011-2010 Code for seismic design of buildings
GB 50016-2014 Code for fire protection design of buildings
GB 50176-2016 Code for thermal design of civil building
GB 50189-2015 Design standard for energy efficiency of public buildings
GB 50210-2018 Standard for construction quality acceptance of building decoration
GB 50300-2013 Unified standard for constructional quality acceptance of building engineering
GB 50411-2019 Standard for acceptance of energy efficient building construction
GB 55030
JC/T 841-2007 Alkali-resistant glass fiber mesh cloth
JC/T 841-2024 Alkali-resistant glass fiber mesh cloth
JC/T 2493-2018 JC/T 2493-2018 Construction composite insulated panel for building that does not require demolition
JC/T 60016-2022 Construction Technology Specification for Compound Insulating Formwork that is Not Removable for Building Use
JG/T 366-2012 Anchors for fixing of thermal insulation composite systems
JG/T 407-2013 Self-insulation concrete compound blocks
DGJ32/J 16
DGJ32/J 19
DGJ32/J 71
DB/T 32.1-2020 Technical requirements of instruments in network for earthquake monitoring—Underground fluid observation instruments—Part 1:Pressure instrument for water level
DB/T 32.1-2020 Technical requirements of instruments in network for earthquake monitoring—Underground fluid observation instruments—Part 1:Pressure instrument for water level
DB/T 32.1-2020 Technical requirements of instruments in network for earthquake monitoring—Underground fluid observation instruments—Part 1:Pressure instrument for water level
GB 50003-2011 Code for design of masonry structures
GB 50118-2010 Code for design of sound insulation of civil buildings
GB 50203-2011 Code for acceptance of constructional quality of masonry structures
GB 50204-2015 Concrete Structure Construction Quality Acceptance Standards
GB 50666-2011 Code for construction of concrete structures
GB 55007-2021 Code for design of masonry structures
GB 55015-2021 standard forlighting design of buildings
JGJ/T 14-2011 Technical specification for concrete small-sized hollow block masonry building
JGJ 59-2011 Standard for construction safety inspection
JGJ/T 70-2009 Standard for test method of basic properties of construction mortar
JGJ 126-2015 Specification for construction and acceptanceof tapestry brick work for exterior wall
JGJ 144-2019 Technical standard for extemal thermal insulation on walls
JGJ 162-2008 Technical code for safety of forms in construction
JGJ/T 220-2010 Technical specification for plasting mortar
JGJ/T 235-2011 Technical specification for waterproofing of exterior wall of building
JGJ/T 323-2014 technical specification for application of self-insulation concrete compound block walls
Related Standards
JG 158-2004
Active
JG 158-2004 External thermal insulating rendering systems made of mortar with mineral binder and using expanded polystyrene granule as aggregate
GB/T 19687-2005
Active
GB/T 19687-2005 Determination of the long-term change in thermal resistance of closed-cell plastics(accelerated laboratory test methods)
GB/T 23615.1-2009
Replaced
GB/T 23615.1-2009 Accessorial material for architectural aluminum alloy profiles—Part 1:Thermal barrier strip of polyamide
JG/T 283-2010
Active
JG/T 283-2010 Light weight mortar mixed with expanded and vitrified beads as aggregates
GB/T 25975-2010
Replaced