GB 3883.10-1991
Replaced
GB/T 4706.64-2012
Replaced
National standards
GB/T 4706.64-2012 Safety of household and similar electrical appliances—Part 2:Particular requirements for scissors type grass shears
GB/T 4706.64-2012 Safety of household and similar electrical appliances—Part 2:Particular requirements for scissors type grass shears
Basic Information
Standard Code:
GB/T 4706.64-2012
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Electric tools
ICS Name:
Electric tools
Publish Date:
2012-11-05
Implement Date:
2013-05-01
Pages:
40 pages
Scope
The chapter of GB 4706.1 has been amended as follows:
This part specifies electric hand-held shear-type grass trimmers (hereinafter referred to as "grass trimmers") with a maximum cutting width of 200 mm, primarily used for mowing lawns. Their rated AC voltage shall not exceed 250 V, and rated DC voltage shall not exceed 50 V.
This part applies to the general hazards that may arise during normal use and reasonably foreseeable misuse of grass trimmers by all users.
Development Information
Same series standard
GB 4706.32-2012 Household and similar electrical appliances—Safety—Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
GB 4706.107-2012 Household and similar electrical appliances—Safety—Particular requirements for integrated kitchen appliance
GB 4706.108-2012 Household and similar electrical appliances—Safety—Particular requirements for heated carpets and for heating units for room heating installed under removable floor coverings
Replace the following standards
Superseded by the following standards
Referenced Standards
GB/T 17626.3-1998 Electromagnetic compatibility—Testing and measurement techniques-Radiated, radio-frequency, electromagnetic field immunity test
GB/T 17626.3-2006 Electromagnetic compatibility—Testing and measurement techniques—Radiated, radio-frequency, electromagnetic field immunity test
GB/T 17626.3-2016 Electromagnetic compatibility—Testing and measurement techniques—Radiated,radio-frequency,electromagnetic field immunity test
GB/T 17626.3-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 3:Radiated,radio-frequency,electromagnetic field immunity test
GB/T 17626.4-1998 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test
GB/T 17626.4-2008 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test
GB/T 17626.4-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burstimmunity test
GB/T 17626.5-1999 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test
GB/T 17626.5-2008 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test
GB/T 17626.5-2019 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test
GB/T 17626.6-1998 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances, induced by radio-frequency fields
GB/T 17626.6-2008 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields
GB/T 17626.6-2017 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields
GB/T 17626.11-1999 Electromagnetic compatibility—Testing and measurement techniques—Voltage dips, short interruptions and voltage variations immunity tests
IEC 61000-4-11
GB/T 17627.1-1998 High-voltage test techniques for low-voltage equipment—Part 1:Definitions,test and procedure requirements
GB/T 17627.2-1998 High-voltage test techniques for low-voltage equipment—Part 2:Measuring system and test equipment
GB 17935-1999 Edison screw lampholders
GB/T 17935-2007 Edison screw lampholders
GB/T 17935-2023 Edison screw lamphoders
IEC 60068-2-75
IEC/TR3 60083
IEC 60085
IEC 60112:2003
IEC 60127(所有部分)
IEC 60227(所有部分)
IEC 60245(所有部分)
IEC 60249-2-4:1987
IEC 60249-2-5:1987
IEC 60320-2-3
IEC 60417-DB:2002
IEC 60598-1:2003
IEC 60664-3:1992
IEC 60695-10-2
IEC 60730-1:1999
IEC 60730-2-8:2000
IEC 60906-1
IEC 60999-1:1999
IEC 61000-4-13
IEC 61032:1997
IEC 61058-1:2000
IEC 61058-1
IEC 61558-1:1997
IEC 61558-2-6:1997
IEC 61770
ISO 7000
ISO 9772:2001
GB 3883.1-2008 Safety of hand-held motor-operated electric tools—Part 1:General requirements
GB/T 4269.1-2000 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment—Symbols for operator controls and other displays—Part 1:Common symbols
GB/T 4269.3-2000 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment—Symbols for operator controls and other displays—Part 3:Symbols for powered lawn and garden equipment
GB/T 5013.4-2008 Rubber insulated cables of rated voltages up to and including 450/750 V—Part 4:Cords and flexible cables
GB/T 5023.5-2008 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V—Part 5:Flexible cables (cords)
GB/T 8910.1-2004 Hand-held portable power tools—Measurement of vibrations at the handle—Part1:General
GB/T 15706.1-2007 Safety of machinery—Basic concepts, general principles for design—Part 1:Basic terminology, methodology
GB 17465.1-1998 Appliance couplers for household and similar general purposes Part 1:General requirements
GB/T 17465.1-2009 Appliances couplers for household and similar general purposes—Part 1:General requirements
GB/T 17465.1-2022 Appliance couplers for household and similar general purposes—Part 1:General requirements
GB 17465.2-1998 Appliance couplers for household and similar general purposes Part 2:Interconnection couplers for household and similar equipment
GB/T 17465.2-2009 Appliance couplers for household and similar general purposes—Part 2:Interconnection couplers for household and similar equipment
GB/T 17465.3-2008 Appliance couplers for household and similar general purposes—Part 2:Appliance couplers with a degree of protection higher than IPX0
GB 17465.4-2009 Appliance couplers for household and similar general purposes—Part 2:Couplers dependent on appliance weight for engagement
GB/T 17465.4-2015 Appliance couplers for household and similar general purposes—Part 2-4:Couplers dependent on appliance weight for engagement
GB/T 17465.5-2017 Appliance couplers for household and similar general purposes—Part 2-1:Sewing machine couplers
GB/T 17465.6-2022 Appliance couplers for household and similar general purposes—Part 3:Standard sheets and gauges
GB/T 20247-2006 Acoustics—Measurement of sound absorption in a reverberation room
GB/T 25078.1-2010 Acoustics—Recommended practice for the design of low-noise machinery and equipment—Part 1:Planning
ISO 3744:1994
ISO 11201:1995
ISO 11684:1995
ISO 7000:2004
ISO 13852:1996
CR 1030-1:1995
EN 12449:1999
Adopt standards
IEC 60335-2-94:2008(3.0版)
Related Standards
GB 3883.12-1991
Replaced
GB 3883.12-1991 Safety of hand-held motor-operated electric tools—Part 2:Particular requirements for concrete vibrators (internal vibrators)
GB 3883.3-1991
Replaced
GB 3883.3-1991 Safety of hand-held motor-operated electric tools Part 2:Particular requirements for electric grinders, polishers and disk-type sanders
GB 3883.6-1991
Replaced
GB 3883.6-1991 Safety of hand-held motor-operated electric tools—Part 2:Particular requirements for electric drills
GB 13960-1992
Replaced
GB 13960-1992 Safety of transportable motor-operated electric tools—Part 1:General requirements
GB/T 13956-1992
Abolished