GB/T 17465.1-2022 Active National standards

GB/T 17465.1-2022 Appliance couplers for household and similar general purposes—Part 1:General requirements

GB/T 17465.1-2022 Appliance couplers for household and similar general purposes—Part 1:General requirements

Publish Date: 2022-07-11 Implement Date: 2023-02-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 17465.1-2022
Standard Type: National standards
Standard Status: Active
is_force_gb: no
CCS Name: Other electrical appliances
ICS Name: Plugs, sockets, and connectors
Publish Date: 2022-07-11
Implement Date: 2023-02-01
Publisher: 国家市场监督管理总局、国家标准化管理委员会
Technical Committee: 全国电器附件标准化技术委员会(SAC/TC 67)
Pages: 63 pages

Scope

本文件规定了家用和类似用途的器具耦合器的额定值、标志、尺寸检查、防触电保护、结构、电气性能、机械性能等技术要求。
本文件适用于家用和类似用途的、两极和两极带接地的器具耦合器,其用于将家用和类似用途的电气器具连接到主电源。
本文件也适用于安装在器具上或与器具形成一体的器具输入插座或器具输出插座。
额定电压不超过250 V(a.c.),额定电流不超过16 A。
符合本文件要求的器具耦合器适合正常使用在环境温度通常不超过+40 ℃,但是在24 h的期间内平均环境温度不超过+35 ℃,环境空气温度的下限值为-5 ℃。
附录E提供了在环境温度高于+35 ℃且不超过至+90 ℃(包括+90 ℃)的情况下,对附件工作电流降额的测试要求。
器具耦合器不适用于:
——用来代替GB/T 2099.1插头插座系统;
——用来代替GB/T 31463(所有部分)灯具的连接装置(DCLs)或灯具配套耦合器(LSCs)的器件;
——用来代替GB/T 32517安装式耦合器。

Development Information

Drafting Units:

中国电器科学研究院股份有限公司、广东华声电器实业有限公司、公牛集团股份有限公司、浙江中讯电子有限公司、江苏通领科技有限公司、杭州鸿雁电器有限公司、威凯检测技术有限公司、佛山市高明欧一电子制造有限公司、广东联升传导技术有限公司、浙江德力西国际电工有限公司、安徽恒创凯电气科技有限公司、宁波诚恳电器有限公司、飞雕电器集团有限公司、浙江省检验检疫科学技术研究院、成都阿尔刚雷科技有限公司、思瑞克斯(中国)电器有限公司、宁波馨源电子有限公司、浙江比依电器股份有限公司、飞利富科技股份有限公司、合肥华凌股份有限公司、广东凯华电器股份有限公司、中国质量认证中心、豪利士电线装配(深圳)有限公司、南京康尼新能源汽车零部件有限公司、中家院(北京)检测认证有限公司、浙江跃华电讯有限公司、中国质量认证中心华南实验室、浙江方圆检测集团股份有限公司、四川华丰企业集团有限公司、广州番禺电缆集团有限公司

Drafting Persons:

蔡军、谢基柱、蔡映峰、瞿海亮、蔡苏丰、汪凤琴、李忠耀、欧志文、邱红、柯寒文、束美俊、姚青松、徐益忠、杨昌毅、周刚、孙伟、戴佰庆、胡东升、骆德元、马卓标、陈建雄、刘水强、邓洪玲、周红斌、孙芮、王圣、刘悦、徐建楚、欧伟杰、章卫军、胡卓槐、乌一军、胡盛、杜坤、卢广业

Word Count: 124 Thousand words Pages: 63 pages

Same series standard

Replace the following standards

Referenced Standards

GB/T 5169.11-2017 Fire hazard testing for electric and electronic products—Part 11:Glowing/hot-wire based test methods—Glow-wire flammability test method for end-products(GWEPT) GB/T 16935.1-2008 Insulation coordination for equipment within low-voltage systems—Part 1:Principles,requirements and tests GB/T 17465.6-2022 Appliance couplers for household and similar general purposes—Part 3:Standard sheets and gauges GB/T 2423.7-1995 Environmental testing for electric and electronic products Part 2:Test Ec and quidance:Drop and topple (Primarily for equipment-type specimens) GB/T 2423.7-2018 Environmental testing—Part 2:Test methods—Test Ec:Rough handling shocks,primarily for equipment-type specimens GB/T 2423.51-2000 Environmental testing for electric and electronic products—Part 2:Test methods—Test Ke:Flowing mixed gas corrosion test GB/T 2423.51-2012 Environmental testing—Part 2:Test methods—Test Ke:Flowing mixed gas corrosion test GB/T 2423.51-2020 Environmental testing—Part 2:Test methods—Test Ke:Flowing mixed gas corrosion test GB/T 2423.55-2006 Environmental testing for electric and electronic products—Part 2:Test methods—Test Eh:Hammer tests GB/T 2423.55-2023 Environmental testing—Part 2:Test methods—Test Eh:Hammer tests GB/T 4207-2003 Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions GB/T 4207-2012 Method for the determination of the proof and the comparative tracking indices of solid insulating materials GB/T 4207-2022 Method for the determination of the proof and the comparative tracking indices of solid insulating materials GB/T 5169.21-2006 Fire hazard testing for electric and electronic products—Part 21:Abnormal heat—Ball pressure test GB/T 5169.21-2017 Fire hazard testing for electric and electronic products—Part 21:Abnormal heat—Ball pressure test method GB/T 5465.1-1996 General principles for the creation of graphical symbols for use on electrical equipment GB/T 5465.1-2009 Graphical symbols for use on electrical equipment—Part 1:Overview and classification GB/T 5465.2-1996 Graphical symbols for use on electrical equipment GB/T 5465.2-2008 Graphical symbols for use on electrical equipment—Part 2:Graphical symbols GB/T 5465.2-2023 Graphical symbols for use on electrical equipment—Part 2:Graphical symbols GB/T 5465.11-2007 Basic principles for graphical symbols for use on electrical equipment—Part 1:Creation of symbol originals GB 14536.12-1996 Automatic electrical controls for household and similar use—Particular requirements for energy regulators GB/T 14536.12-2010 Automatic electrical controls for household and similar use—Particular requirements for energy regulators GB 15092.1-2003 Switches for appliances Part 1:General requirements GB/T 15092.1-2010 Switches for appliances—Part 1:General requirements GB/T 15092.1-2020 Switches for appliances—Part 1:General requirements GB 15092.2-1994 Switches for appliances—Part 2:Particular requirements for cord switches GB/T 15092.2-2014 Switches for appliances—Part 2:Particular requirements for cord switches GB/T 15092.2-2023 Switches for appliances—Part 2-1:Particular requirements for cord switches GB 15092.3-1998 Switches for appliances Part 2:Particular requirements for change-over selectors GB/T 15092.3-2014 Switches for appliances—Part 2:Particular requirements for change-over selectors GB/T 15092.3-2023 Switches for appliances—Part 2-5:Particular requirements for change-over selectors GB 15092.4-1999 Switches for appliances—Part 2:Particular requirements for independently mounted switches GB/T 15092.4-2006 Switches for appliances—Part 2:Particular requirements for independently mounted switches GB/T 15092.4-2023 Switches for appliances—Part 2-4:Particular requirements for independently mounted switches GB/T 15092.5-2021 Switches for appliances—Part 2:Particular requirements for switches used in electric motor-operated hand-held tools,transportable tools and lawn and garden machinery GB/T 15092.101-2020 Switches for appliances—Part 1-1:Requirements for mechanical switches GB/T 15092.102-2020 Switches for appliances—Part 1-2:Requirements for electronic switches GB/T 16842-1997 Test probes to verify protection by enclosures GB/T 16842-2008 Protection of persons and equipment by enclosures—Probe for verification GB/T 16842-2016 Protection of persons and equipment by enclosures—Probe for verification GB 17464-1998 Connecting devices—Safety requirements for screw-type and screwless-type clamping units for electrical copper conductors GB/T 17464-2012 Connecting devices—Electrical copper conductors—Safety requirements for screw-type and screwless-type clamping units—General requirements and particular requirements for clamping units for conductors from 0.2 mm2 up to 35 mm2(included) GB/T 14536.12-2024 Automatic electrical controls—Part 12:Particular requirements for energy regulators

Adopt standards

IEC 60320-1:2021

Related Standards

Contact Us