GB/T 17923-1999
Replaced
GB/T 41961-2022
Active
National standards
GB/T 41961-2022 Treatment and disposal methods for used mineral oil lubricant
GB/T 41961-2022 Treatment and disposal methods for used mineral oil lubricant
Price:
$ 66
Basic Information
Standard Code:
GB/T 41961-2022
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Technical Specifications for Pollution Control
ICS Name:
Liquid waste, sludge
Publish Date:
2022-12-30
Implement Date:
2023-07-01
Pages:
17 pages
Scope
This document specifies the process route, method summary, treatment and disposal methods, finished product control, and environmental protection requirements for the treatment and disposal of waste mineral oil lubricants.
This document applies to the treatment and disposal process of waste lubricants from all sources except "petroleum extraction, natural gas extraction, and the manufacture of refined petroleum products" in the category "HW08 Waste Mineral Oil and Mineral Oil-Containing Waste" listed in the National Hazardous Waste List (2021 Edition).
Development Information
Referenced Standards
GB 5085.7
GB 8978
GB 16297
GB 18599
SH/T 0015-1990
SH/T 0253
SH/T 0753
GB/T 260-2016 Test method for water in petroleum products—Distillation method
GB/T 265-1988 Petroleum products—Determination of kinematic viscosity and calculation of dynamic viscosity
GB/T 387-1990 Dark petroleum products—Determination of sulphur content—Tubular oven method
GB/T 508-1985 Petroleum products—Determination of ash
GB/T 1884-2000 Crude petroleum and liquid petroleum products—Laboratory determination of density—Hydrometer method
GB/T 1885-1998 Petroleum measurement tables
GB/T 1995-1998 Petroleum products—Calculation of viscosity index
GB/T 3535-1983 Petroleum oils—Determination of pour point
GB/T 3535-2006 Petroleum products—Determination of pour point
GB/T 3536-1983 Petroleum products—Determination of flash and fire points—Cleveland open cup method
GB/T 3536-2008 Petroleum products—Determination of flash and fire points—Cleveland open cup method
GB/T 4945-2002 Standard test method for acid and base number of petroleum products and lubricants by Colour-indicator titration
GB/T 6540-1986 Petroleum products—Determination of colour
GB/T 7304-2000 Petroleum products and lubricants—Determination of acid number—Potentiometric titration method
GB/T 7304-2014 Standard test method for acid number of petroleum products by potentiometric titration
GB/T 9170-1988 Lubricating oils and fuel oils—Determination of total nitrogen—Modified kjeldahl method
GB/T 17040-1997 Petroleum products—Determination of sulfur—Energy-dispersive X-ray fluorescence spectroscopy
GB/T 17040-2008 Standard test method for sulfur in petroleum and petroleum products by energy dispersive X-ray fluorescence spectrometry
GB/T 17040-2019 Determination of sulfur in petroleum and petroleum products—Energy dispersive X-ray fluorescence spectrometry
SH/T 0604-2000 Crude petroleum and petroleum products--Determination of density--Oscillationg U-tube method
SH/T 0607-1994 Rubber Filling Oil, Process Oil, and Determination of Petroleum Derivatives by Adsorption Chromatography using White Soil-Silica Gel Method
SH/T 0657-1998 Standard test method for trace nitrogen in liquid petroleum hydrocarbons by syringe/inlet oxidative combustion and chemiluminescence detection
SH/T 0689-2000 Standard test method for determination of total sulfur in light hydrocarbons,motor fuels and oils by ultraviolet fluorescence
NB/SH/T 0059-2010 Determination of Evaporative Losses of Lubricating Oil - Noack Method
SH/T 0162-1992 Determination of alkaline nitrogen in petroleum products
SH/T 0193-2008 SH/T 0193-2008 Determination of oxidative stability of lubricating oils - Rotary oxygen bomb method
SH/T 0657-2007 Determination of Trace Amounts of Nitrogen in Liquid Petroleum Hydrocarbons by Oxidative Pyrolysis and Chemical Luminiscence Method
SH/T 0731-2004 Lubricant evaporation loss determination method (thermogravimetric-OA method)
SH/T 0193-1992 Lubricant Oxidation Stability Test (Rotary Oxygen Bomb Method)
HJ 1034-2019 Technical specification for application and issuance of pollutant permit waste resources processing industry
GB/T 3535-2025 Determination of pour point for petroleum products
GB/T 6540-2025 Determination for colour of petroleum products
Related Standards
GB 18420.1-2001
Replaced
GB 18420.1-2001 Biological toxicity grading for pollutant from marine petroleum exploration and exploitation
GB/T 18420.2-2001
Replaced
GB/T 18420.2-2001 Biological toxicity inspection method for pollutant from marine petroleum exploration and exploitation
GB 18420.1-2009
Active
GB 18420.1-2009 Biological toxicity for pollutants from marine petroleum exploration and exploitation—Part 1:Grading
GB/T 18420.2-2009
Active
GB/T 18420.2-2009 Biological toxicity for pollutants from marine petroleum exploration and exploitation—Part 2:Test method
YS/T 119.12-2010
Active